Search Results for "elliptical-controller"

Eclipse 4diac is an open source PLC environment allowing to implement industrial control solutions in a vendor neutral way. 4diac implements IEC 61499 extending IEC 61131-3 with improved support for controller to controller communication and dynamic reconfiguration. With that 4diac provides the infrastructure for Industrie 4.0 and industrial IoT. Further information and the latest versions can be found here: https://eclipse.dev/4diac/

bctl is a C++ state-machine based boiler controller utilizing a 1-Wire bus for sensors and I/O. It implements a multi-loop circulation/distribution controller targeting a dual boiler system for combined wood/fuel based heating. The wood fired boiler system utilizes hot water thermal storage and indirect heating of domestic hot water during firing. It includes provision for dumping excess heat to the distribution system, as well as provision for heat recovery during a cool-down cycle. ...

Wire Factory Simulator (WFS) is a free software to simulate the control of a factory, mainly controlled by IEC 61499 applications. You can build your own factory and controller. The controller can be implemented on any programming language. WFS was originally built to simulate the action of an IEC 614999 application. So, the devices in the factory are easily connected to IEC 61499 applications. The WFS were mainly tested with FBDK (http://www.holobloc.com/). Wire Factory has been implemented to help to test more complex automation systems during a doctorate course under guidance of: Supervisor: Prof. ...

AIC (Advanced Irrigation Controller) is a computer based control system that has been initially targeted towards controlling irrigation in small to medium size gardens. As the product matures and features are added it is expected to be a fully functional controller used in large scale implementations, green houses and glass houses. AIC platform's in-dependency means it can run on both Linux or Windows XP onwards .

Software application, firmware and U.I. for 4-motors 3-axis milling machine, open hardware, software and mechanics. See also project in details for schematics and images on http://www.contesti.eu/opensource/xyz-dc-motor-controller