Search Results for "programming"

This is our T3000 Building Automation front end, a mature project for managing the air conditioning, lighting, access control and other automation functions of commercial buildings. The application runs on a Windows PC and allows the building operator to manage the building as a complete system. There is a small but growing team of developers working on the application full time. The system works mainly with Temco Controls products but integrators, controls contractors and other...

...It has a powerful search function to find the type of sensor if you have a known temperature and resistance - this way you can find with which kind of sensor you have to deal if you need to find it out for e.g. programming the HVAC controller.

Wire Factory Simulator (WFS) is a free software to simulate the control of a factory, mainly controlled by IEC 61499 applications. You can build your own factory and controller. The controller can be implemented on any programming language. WFS was originally built to simulate the action of an IEC 614999 application. So, the devices in the factory are easily connected to IEC 61499 applications. The WFS were mainly tested with FBDK (http://www.holobloc.com/). Wire Factory has been implemented to help to test more complex automation systems during a doctorate course under guidance of: Supervisor: Prof. ...

...Would you like to automate and controll remotely your home appliances from internet or lan using your phone /pc ? This program is for you! Internet of things made easy for everyone. Open source , simple to use , no need to know any programming language , you can add your programs easy , it runs bash command!every linux system will run it , portable . No installation required! just copy the folder where you want, connect your arduino to the usb and run the python program on the pc.

This project is for the development of PLC programming best practices. Based on expert input, a free video series will be developed by http://BIN95.com In this project we will start with the most basic 'start stop' ladder logic, then on to 'motor control' etc., working our way up to use of advanced instructions and tecniques. All along we will be using most common real world applications in PLC programming tutorial videos.

Sikulier is a UI automation framework. I does not need any programming language knowledge for automation.