Search Results for "linux 32 bits"

This library implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232...

[This is not the official application of APOD] APOD desktop is a program that permit see and navigate in the APOD directory of easy and fast form. Official webpage of APOD: https://apod.nasa.gov/apod/astropix.html ---------- ---------- ---------- ---------- ---------- Developed in: Python 3.4 with tkinter GUI Tested on: Windows 10 x64 bits Versions: 0.2 --> 08-02-2017 (actual) 0.1 --> 06-02-2017 Developer: Bryan Casanelli, student of physical civil...

This module implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port...

This is clone of the Celestron PECTool used to upload, download and manipulate PEC data. It is intended to work with Celestron Nexstar mounts like NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, Advanced-VX, Advanced-GT and CGE mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port on the base of the hand control. To build it libnexstar version 0.11 or newer is needed, which can be found here:...