Search Results for "serial device programmer"

This is an enhanced 4-Channel automated Dew Controller based on an ESP32 WiFi chip on a PCB and enclosed in a project hobby box. (c) Copyright Robert Brown 2020-2024. All Rights Reserved.Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. EXPANSION BOARDS - You can expand this project using the two types of project expansion boards at https://sourceforge.net/projects/myesp-boards/

...Filter wheel: Starlight Xpress 5. Focuser: Robofocus 6. Flat fielder: Flip-Flat 5. USB serial adapter (PL2303-based) for controlling a mount via a serial port. I recommend ATEN UC232A. 6. Powered USB hub 7. TRONSMART MK808 (with RK901 wifi) or MK808B (with RK903 wifi). I got it from geekbuying.com. Or any RK3066 mini PC stick + an external Ralink5370 usb wifi adapter. 8. Class-10 micro SD card (at least 8GB). If you have any question, discuss here ...

This INDIdriver interacts with a mount controller using the Skywatcher Protocol through a serial link. It can directly drive Skywatcher and similar mounts through a serial port after a conversion of signal levels (see EQDIRECT interface), or any other mount hardware which uses this protocol. This project is similar in its goal to the EQMOD/EQASCOM project, but for the Linux/INDI world. Thus the name of the INDI device is "EQMod Mount", and the driver executable is indi_eqmod_telescope. ***** Refer to the libindi library ***** The driver is now included in the libindi library as a 3rd party driver (indi-eqmod).