Search Results for "device to device"

A client program compatible with the INDI standard (see http://indi.sourceforge.net) for remote telescope and device control. It works under Windows as well as Linux. It is writen in Python and uses the GTK in order to display the GUI.

...This code is for the direct-sampling input of the receiver, which transmits real samples over USB3 at up to 130 MHz sample rate. rx2fits processes these samples to spectral intensities via a Fourier-transform poly-phase filter bank, which provides spectral resolution approaching the spectral bin width with good stop-band and adjacent-channel rejection. Sample rate, Fourier bin count, PFB frame count, integration time and receiver gain parameters can be set. Utilities for device enumeration, firmware upload, display of FITS header, file viewing, and for measuring sample rate and sample statistics are provided. The device interface is Ruslan Migirow's librx888 and dropped samples at 130 MHz are negligible. Runs on linux computers under .Net.

This is an enhanced 4-Channel automated Dew Controller based on an ESP32 WiFi chip on a PCB and enclosed in a project hobby box. (c) Copyright Robert Brown 2020-2024. All Rights Reserved.Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. EXPANSION BOARDS - You can expand this project using the two types of project expansion boards at https://sourceforge.net/projects/myesp-boards/

RTS2 is project to create an open source environment for control of a fully autonomous observatory. It is running about dozen fully autonomous observatories. Its modular design allow easily addition of new devices (to already huge supported HW list).

A Java library implementing the INDI distributed control protocol (http://indilib.org). Designed to easily implement new INDI Clients (graphical and not graphical ones), INDI Drivers and INDI Servers. We have started a complete overall of the project with many more drivers the staging site with the current development state can be found here http://indiforjava.sourceforge.net/stage/

The GPU-BH tree solver is a FLASH4 module to calculate the gravitational potential using a CUDA device.

iAstroHub is: - the world's first solution for mobile astrophotography. A user can interact with all astrophotography devices from any mobile device using a web browser. - developed by Anat Ruangrassamee, Ph.D., Bangkok Thailand. (aruangra at yahoo dot com) See how it works from here: http://www.youtube.com/watch?v=Sncd3j8ipBQ Requirements and supported devices. 1. Autoguider: Orion Starshoot autoguider, QHY5, QHY5-II, QHY5L-II, QHY6 2. DSLR 3. CCD: QHY5,6,8,8L,9,11,12 4. ...

...In the end, it prints out the set of largest frequency tuples that were still found significant. The GPU computing is implemented through CUDA and brings a significant performance increase. It is still possible to run FreDec solely on CPU, if no suitable GPU device is available in the system. See the details of the underlying theory in Baluev 2013, MNRAS, V. 436, P. 807 The description of the algorithm itself can be found in arXiv:1309.0100. Please go to the project forum to report any bugs.

astroDevice is a software platform for the control of astronomical instruments (telescope mount, filter wheel, focuser and CCD) through a single interface. This platform manages any astronomical device through plug-ins. It can manage multiple devices of same type (eg two telescope mounts). astroDevice is an alternative to ASCOM and INDI by providing a common interface between each device type and astronomy software such as Starry Night, KStars, Skychart and Stellarium. The platform is based on a client-server architecture to provide the ability to control the astronomical devices remotely.

...It can directly drive Skywatcher and similar mounts through a serial port after a conversion of signal levels (see EQDIRECT interface), or any other mount hardware which uses this protocol. This project is similar in its goal to the EQMOD/EQASCOM project, but for the Linux/INDI world. Thus the name of the INDI device is "EQMod Mount", and the driver executable is indi_eqmod_telescope. ***** Refer to the libindi library ***** The driver is now included in the libindi library as a 3rd party driver (indi-eqmod).

L.E.I.C.A. (Long Exposure Internet CAmera) is an application that takes input from your webcam, or v4l2 device, and makes a long-exposure image. Until now there's only a python binding for this app, soon there will be a C/C++ SDL one

Qastrocam is a capture program to do astrophotography. It can control a telescope to do guiding with the images received from a V4L device. It can also control the extended features of a webcam modified to do long exposure (several seconds) captures.

MobileStarChart is a MIDP1.0/2.0 midlet for Java-enabled mobile/cell phones or handheld device. It simulates whole sky at any point on earth with constellations, stars up to 6 mag, solar systems and some other celestial objects.

XAudine : Linux control command software,GUI and device drivers for operating Audine astronomy CCD camera.