Search Results for "qgis-osgeo4w-2.6.1-1-setup"

myFocuserPro2 (myFP2) is an ASCOM - INDI - LINUX - WINDOWS telescope focuser with a large range of options. 286,500+ file downloads. The most popular focuser project. (c) Copyright Robert Brown 2014-2024. All Rights Reserved. Code or portions of code may not be copied or used without written permission from the author. Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - ...

p3d is a general data-reduction tool for use with fiber-fed integral-field spectrographs (IFSs); although, the spectrum viewer works with spectrum data cubes of any origin. The tool is built about the proprietary software IDL (Harris/EXELIS; see http://www.harrisgeospatial.com), but can be used without any license. Most slowly running loops are implemented in parallelized C (OpenMP).

This library implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port...

SoundStepper is a "100% software" telescope controller, for Windows, using audio hardware to control step motors at real time. All it requires to operate are external step motor drives, which can be a commercial "pulse/direction" drive or analog current amplifiers. Documentation: http://soundstepper.sourceforge.net/

This module implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port...

Starblinker allows to easily search for new stars in your astronomical photos. The new star could be: 1) An already known or a new unknown asteroid; 2) An already known or a new unknown comet; 3) An already known or a new unknown galactic nova; 4) If it is superimposed to an external galaxy, an already known or a new unknown supernova; Before reporting a potential new discovery, please make all necessary checks to be sure it is not an already known object or a defect in your image.

It provides an USB connection for the communication with the PC, it uses a stepper motor that provides higher precision, you can set the motor in full step or in microstepp mode (1, 1/2, 1/4, 1/8). The focuser include a temperature sensor. This driver has a ToolBox with which you can control manually the focuser (for example you can set the limits).

Developed between 1992 and 1999, this is a very early simulation of how the stars of our solar neighborhood may look from different perspectives in the Milky Way. The user may position the starship at one of hundreds of objects in the database or enter the position using galactic coordinates. Navigate by destination or course using one of a multiple of "warp speed" selections available. Viewers: Select from Forward view or Tactical view. Flight and arrival times are given...

OpenWD is a scientific project to develop state-of-the-art models of white dwarf stars, to draw upon the collective expertise of astronomers around the world, and to facilitate comparisons between evolutionary and pulsational studies of white dwarf stars