Search Results for "computer science projects"

...Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port on the base of the hand control. Communication can be established over TCP/IP if nexbridge is running on the computer connected to the telescope. To control network based telescopes nexbridge must be used on the remote site. https://sourceforge.net/projects/nexbridge/

SoundStepper is a "100% software" telescope controller, for Windows, using audio hardware to control step motors at real time. All it requires to operate are external step motor drives, which can be a commercial "pulse/direction" drive or analog current amplifiers. Documentation: http://soundstepper.sourceforge.net/

This module implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port...