Search Results for "mount"
Sort By:
Showing 24 open source projects for "mount"
View related business solutions-
Enterprise-grade ITSM, for every businessFreshservice is an intuitive, AI-powered platform that helps IT, operations, and business teams deliver exceptional service without the usual complexity. Automate repetitive tasks, resolve issues faster, and provide seamless support across the organization. From managing incidents and assets to driving smarter decisions, Freshservice makes it easy to stay efficient and scale with confidence.
-
One App to Replace Your Entire SaaS StackClickUp replaces your scattered tool stack with one AI-powered platform. Stop paying for project management, docs, chat, and time tracking separately when they all live in one place. Teams that consolidate into ClickUp cut software costs and move faster because everything is connected, not siloed across apps that don't talk to each other.
-
1
CCDciel
Astronomy CCD capture software
...It include all the features required to perform digital imaging CCD observation of celestial objects. Using the standard drivers protocol INDI and ASCOM it can connect and control the CCD camera, the focuser, the filter wheel and the telescope mount. This software is part of a full suite for astronomical observation: https://sourceforge.net/projects/skychart/ https://sourceforge.net/projects/indistarter/ https://sourceforge.net/projects/eqmodgui/ Requirement: https://sourceforge.net/projects/libpasastro/ See also: https://sourceforge.net/projects/indi/ -
2
PreviSat
Satellite tracking software
PreviSat is a satellite tracking software for observing purposes. Very easy to use, it shows positions of artificial satellites in real-time or manual mode. PreviSat is able to make predictions of their passes, predictions of MetOp and COSMO-SkyMed flares, transits of all satellites, predictions of Starlink satellites passes and several other calculations. -
3
EQ Track
Collection of embedded softwares to control a telescope mount.
EQ Track purpose is to provide amateur telescope makers (ATM) with electronic board schematics and embedded software to control their telescope mount via stepping motors. EQ Track comes in different "flavors" : - "Basic" controls the right ascension and declination motors of an equatorial mount. - "Go To" controls the motors of a mount in any orientation (ie. equatorial, altazimuth, alt-alt), to point and track equatorial coordinates. -
4
AstroTimer
Astrophotography image capture, session sequencer / PHD2 interface
Astrophotography capture using ASCOM interfaces with mount and camera devices and interfaces with PHD2 for guiding and dithering. Database for search of DSO objects, Sun, Moon, planets, minor planets and comets. Image platesolving using ANSVR, local astrometry under WSL or astrometry.net site. -
$300 Free Credits to Build on Google CloudStart your next project with $300 in free Google Cloud credit. Spin up VMs, run containers, query petabytes in BigQuery, or build agents with Gemini Enterprise Agent Platform. Once your credits are used, keep building with 20+ always-free tier products including Compute Engine, Cloud Storage, GKE, and Cloud Run functions. No commitment required—just sign up and start building.
-
5
pyindi-client
Python binding to the libindi library
...As application examples you will find a Python Websocket server with which you may build a web application interacting with Indi servers, and a simple PyQt application similar to the Kstars Indi Control Panel (was built as an exercise). Finally there is an equatorial mount 3D simulator written with Freecad and Python, planned to be connected with the PyIndi module. *** The pyindi-client binding has moved to github. *** -
6
Pikon-Stelarium interface
Pikon-Stelarium interface to use with azimuthal mount
This is a full project to make an software-drived azimuthal mount for the Pikon telescope, it can be use for others telescope. This project include : . Some other parts to print to adapt to the Pikon . Python code for raspberry Needed parts for "as it" use : . 1 Raspberry (model A suit well) . 3 motors steppers . 3 steppers drivers . 1 BNO055 (the one from adafruit was used) . 1 Pikon driver . 1 GPS module Sofware requirement : . raspbian . python 3 . some python libraries -
7
libnexstar
C API to control NexStar compatible telescopes
This library implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232... -
8
PARot polar aligner
Software for polar alignment of equatorial mounts
PARot is a program for ultra fast and precise polar alignment of equatorial mounts. You can easily achieve alignment accuracy better than 1 arcmin in 5 minutes of time. You take one image of the celestial pole, rotate the mount around the RA axis and take another image. The program compares the images and shows you the necessary adjustment. The adjustment process is controlled by the live-liew created by your camera. Requirements: * A computer with Windows OS (tested with WinXP x64, Win7 x64, Win7 x86). * Maxim DL version 5. * A camera which can be controlled from MaxIm... -
9
SoundStepper
A software for ATM telescope automation
SoundStepper is a "100% software" telescope controller, for Windows, using audio hardware to control step motors at real time. All it requires to operate are external step motor drives, which can be a commercial "pulse/direction" drive or analog current amplifiers. Documentation: http://soundstepper.sourceforge.net/ -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
10
High Speed Parallel Imaging (HSPI)
HSPI does parallel capture and sky surveys.
HSPI offers to the astronomer the possibility to capture pictures from the CCD camera in a fast and intuitive way, keeping under control all the instrumentation in posses. HSPI can control the CCD camera, the mount, the focuser, the filter wheel and the dome from a single interface, and not only this: these features can be added on as many observatories and instrumentations you want. HSPI is ASCOM and INDI compatible, so if you want to use particular setups like Linux computers connected with your instrumentation and control them from remote then HSPI is your choice! ... -
11
NexStarCtl
Cross platform Perl API to control NexStar compatible telescopes
This module implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port... -
12
Instrumented Telescope
Software for instrumenting a Dobsonian telescope
This projects hold software required for instrumenting an alt-az telescope mount. The required hardware is documented here (http://simonbox.info/index.php/astronomy). The software enables real time conversion from (measured) alt-az to ra-dec and manages a connection to Stellarium (http://www.stellarium.org/), which allows you to view where the telescope is pointing in a virtual planetarium. -
13
iAstroHub
Automated astrophotography using mobile devices
...CCD: QHY5,6,8,8L,9,11,12 4. Filter wheel: Starlight Xpress 5. Focuser: Robofocus 6. Flat fielder: Flip-Flat 5. USB serial adapter (PL2303-based) for controlling a mount via a serial port. I recommend ATEN UC232A. 6. Powered USB hub 7. TRONSMART MK808 (with RK901 wifi) or MK808B (with RK903 wifi). I got it from geekbuying.com. Or any RK3066 mini PC stick + an external Ralink5370 usb wifi adapter. 8. Class-10 micro SD card (at least 8GB). If you have any question, discuss here ... -
14
Open PECTool
Open PECTool - manipulate peroidic error data for Celestron mounts.
This is clone of the Celestron PECTool used to upload, download and manipulate PEC data. It is intended to work with Celestron Nexstar mounts like NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, Advanced-VX, Advanced-GT and CGE mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port on the base of the hand control. To build it libnexstar version 0.11 or newer is needed, which can be found here:... -
15
astroDevice
Software platform for the control of astronomical instruments.
astroDevice is a software platform for the control of astronomical instruments (telescope mount, filter wheel, focuser and CCD) through a single interface. This platform manages any astronomical device through plug-ins. It can manage multiple devices of same type (eg two telescope mounts). astroDevice is an alternative to ASCOM and INDI by providing a common interface between each device type and astronomy software such as Starry Night, KStars, Skychart and Stellarium. -
16
-
17
indi-skywatcherprotocol
INDI driver for mounts using the SkyWatcher Protocol through RS232
This INDIdriver interacts with a mount controller using the Skywatcher Protocol through a serial link. It can directly drive Skywatcher and similar mounts through a serial port after a conversion of signal levels (see EQDIRECT interface), or any other mount hardware which uses this protocol. This project is similar in its goal to the EQMOD/EQASCOM project, but for the Linux/INDI world. -
18
Multi-SETI@home Monitor. This program was written to monitor SETI@home and BOINC activity that may be running on multiple computers over a network without having to cross mount file systems. Runs on Windows/Linux/Unix.
-
19
Computerized Telescope
Arduino lx200 based computerized telescope
Arduino al/az mount controller based on lx200 protocol. -
20
AstroMate
Please see AstroTortilla -project instead.
AstroMate is a project for automating repeating astrophotography tasks, such as equatorial mount polar alignment and target centering, by integrating existing tools and especially plate solving to the ASCOM telescope control interface. This project has been replaced by AstroTortilla. -
21
EQAlign born as a software that assists to align a German Equatorial Mount (GEM) exactly to the Earth polar axis. Today, in adition to polar align feature, EQAlign is a full featured astronomical software.
-
22
A system designed to drive a computer motorized telescope mount to track artificial satellites in real time. Additionally, provides video time stamping using GPS via dedicated hardware solution.
-
23
indi-mount-tools
Small personal tools to control indi mounts
This project gathers small tools aimed at controlling astronomical mounts driven with the INDI protocol. As of now, there is an "handcontroller" GUI application (Pad), which includes the use of a joypad device, and a helper for polar aligning an equatorial mount (Polar Align). Besides a small catalog browser/reader (Catalogs), and a more specific Align Viewer GUI application aimed at displaying current alignment data for the EQMod INDI driver. -
24
hfsad
Hardware, Firmware, Software for Astronomical Devices
This project is a collection of DIY hardware devices aimed at astronomy, together with their firmwares and softwares. At this moment, it contains a PIC based mount motorization, built for an old EQ5-like mount. The firmware implements the Skywatcher protocol.
- Previous
- You're on page 1
- Next
