Search Results for "computer network projects"

An ESP32-Dev WiFi focuser. DIY or PCB designs. (c) Robert Brown 2014-2025, Holger M, 2019-2021. All rights reserved. Code or portions of code may not be copied or used without appropriate credit given to authors. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download Spreadsheets to calculate...

This is an enhanced 4-Channel automated Dew Controller based on an ESP32 WiFi chip on a PCB and enclosed in a project hobby box. (c) Copyright Robert Brown 2020-2024. All Rights Reserved.Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. EXPANSION BOARDS - You can expand this project using the two types of project expansion boards at https://sourceforge.net/projects/myesp-boards/

...Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port on the base of the hand control. Communication can be established over TCP/IP if nexbridge is running on the computer connected to the telescope. To control network based telescopes nexbridge must be used on the remote site. https://sourceforge.net/projects/nexbridge/

...For extended example how to use this perl module look in to the distribution folder for nexstarctl.pl. This program is a complete console tool to control NexStar telesctopes based on NexStarCtl module. To control network based telescopes nexbridge must be used on the remote site. https://sourceforge.net/projects/nexbridge/

SITools2 is a new CNES generic tool performed by a joint effort between CNES and scientific laboratories. The aim of SITools is to provide a self-manageable data access layer deployed on already existing scientific laboratory databases.

This program tries to emulate the meade telescope control system (tcs) in a computer, so to create a working system for the tololo telescope of the "Pontificia Universidad Catolica de Chile". The system is intended to be controlled via a web interface.

Ksetiwatch monitors multiple SETI@home clients running on your computer or in your local network, and logs/manages completed work units. It is developed for the K Desktop Environment.

AtomicGPSClock is a low cost alternative to keep precise time on your computer. It utilizes any GPS that outputs the NMEA 2.0 protocol via RS-232 to accurately set a computers clock. For standalone, mobile, or network (SNTP) installations.