Search Results for "reset"

...There are several awkwardness in the design, e.g., the first occurence of the ~HALT signal is disconnecting ROM, leaving only the RAM to be accessible by the CPU until RESET (actually, it's this feature that made CP/M bootable on it!). Of the 128kB of available RAM, only 96kB can be used, the upper 32kB is always the same (CP/M's BDOS and BIOS are there), the lower 32kB can be banked on and off by the CP/M BIOS. It is being used for the 12kB ramdisk(A:) and for storing the copy of the CCP (CP/M's shell) so it does not need to be loaded from the SD Card. ...

...The cartridge hardware expands upon the firmware features by supplying a de-multiplexer for the $9800..$9FFF I/Ox area (where the firmware is located per default) and a versatile reset button (with autostart inhibit for secondary cartridges). Size: only 2048 Bytes. Start with SYS 38912 Read 'instructions.12.txt' for further info.

...To make use of this driver, you need to edit the hardcoded IP address of the remote host you wish to connect, compile the driver code with Pasmo assembler, run FIDCSUM on it and copy the final binary to your bootable disk. Caveats: - Only 16MB disk images are supported. - All errors are non-recoverable and require hardware reset.

...It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset