Search Results for "ramdisk"

...Of the 128kB of available RAM, only 96kB can be used, the upper 32kB is always the same (CP/M's BDOS and BIOS are there), the lower 32kB can be banked on and off by the CP/M BIOS. It is being used for the 12kB ramdisk(A:) and for storing the copy of the CCP (CP/M's shell) so it does not need to be loaded from the SD Card. It was more fun than you all think.

...Proven to work on the real thing and in the FUSE emulator. This driver can work along with spectram.fid driver exposing unused part of Spectranet's RAM as the M: ramdisk. NO BINARY RELEASES! To make use of this driver, you need to edit the hardcoded IP address of the remote host you wish to connect, compile the driver code with Pasmo assembler, run FIDCSUM on it and copy the final binary to your bootable disk. Caveats: - Only 16MB disk images are supported. - All errors are non-recoverable and require hardware reset.

...A Spectranet device (apart from being networking interface) contains 128kB of extra RAM that can be accessed even with the Spectranet firmware disabled. This project proposes a FID driver that exposes Spectranet's extra memory as a ramdisk to the CP/M Plus system. Changes in v1.1: keep floppy drive motor state (as set by CP/M) when paging in Spectranet RAM (to avoid motor jumps). Unfortunately, motor state is controlled by the same hardware register as +3's memory paging features! Changes in v1.2: Avoid using Spectranet RAM page 0 used by the device itself. Thanks to this change this driver can be used with the upcoming driver for networked disk image. ...

FiwixOS 3 is a Fiwix distribution, an operating system made from a software collection that is based upon the Fiwix kernel. It basically comprises a Fiwix kernel, GNU tools, libraries and additional software. All the included software is free and open-source software made available both as compiled binaries and in source code form, which allows modifications to the original software. FiwixOS 3 uses the Newlib v3.1.0 as its C standard library, and the Ext2 as its primary file...

An operating system written in C & assembly. FruityOrange uses the concept of a monolithic kernel and GRUB as bootloader for the kernel and some modules. There is still no release. If you want do try the development-version, get the Sourcecode and build by yourself!

ReSizeable RAMDisk for FreeDOS (and other DOS). SRDISK is fast and able to use over 32M of XMS and EMS memory. The size of disk can be changed without rebooting or loss of content. Diskcopy compatible.

Blob is a boot loader for SA11x0 (StrongARM) platforms. Blob is able to boot a Linux kernel stored in flash or RAM and provide that kernel with a ramdisk (again from flash or RAM).