Search Results for "flash memory"

pFFh is a programming language that allows you to launch applications on embedded systems safely, quickly and comfortably. pFFh runs on the target system, combining operation as a command interpreter and code compiler. We can say that pFFh behaves like an operating system on the board under development. All pFFh needs is a serial or USB-serial channel to communicate, and through it, receive and process console commands, either from a keyboard or from files sent from a desktop computer. At...

...A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset

EasyFlash is a flash memory cartridge for the Commodore 64 with multiple configurations and banks possible. Since it does not use traditional UV-EPROMs but Flash memory, it is possible to "burn" the cartridge using your C64. No EPROM programmer is needed.

read/write flash memory on linux. supported hardware: - "Pannenhelfer (c't-Flasher)" from the magazine c't. - ide-flasher - intel epro100 - via rhine II - realtek 8139 - 3COM 3c90xc - BIOS SIS630