Search Results for "controller"
Sort By:
Showing 23 open source projects for "controller"
View related business solutions-
Outgrown Windows Task Scheduler?Windows Task Scheduler wasn't built for complex, cross-platform automation. Get a free diagnostic that shows exactly where things are failing and provides remediation recommendations. Interactive HTML report delivered in minutes.
-
AI-generated apps that pass security reviewRetool lets you generate dashboards, admin panels, and workflows directly on your data. Type something like “Build me a revenue dashboard on my Stripe data” and get a working app with security, permissions, and compliance built in from day one. Whether on our cloud or self-hosted, create the internal software your team needs without compromising enterprise standards or control.
-
1
Arduino ASCOM Focuser Pro2 DIY
Version 2 of the myFocuser Project
...Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - https://sourceforge.net/projects/myfp2esp8266-focus-controller/ myFP2N - Nextion touch screen display - https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2N%20NEXTION%20TFT%20DISPLAY/ myFP2M - Ready made Controllers https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2M/ Please look in the Files-Documents folder for more information. ... -
2
pFFh
a self-contained development environment for embedded systems.
pFFh is a programming language that allows you to launch applications on embedded systems safely, quickly and comfortably. pFFh runs on the target system, combining operation as a command interpreter and code compiler. We can say that pFFh behaves like an operating system on the board under development. All pFFh needs is a serial or USB-serial channel to communicate, and through it, receive and process console commands, either from a keyboard or from files sent from a desktop computer. At... -
3
Arduino ASCOM Focuser Pro DIY
Arduino Focuser, fully ASCOM complaint
myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download -
4
GXSM
Scanning Probe Microscopy Controller and Data Visualization Software
GXSM -- Gnome X Scanning Microscopy: A multi-channel image and vector-probe data acquisition and visualization system designed for SPM techniques (STM,AFM..), but also SPA-LEED/LEED/LEEM data analysis. A plug-in interface allows any user add-on data-processing and special hardware and instrument support. Latest: NC-AFM and related explorative methods as SQDM can be configured. High-Speed external PAC-PLL hardware option with digital DSP link. Based on several hardware options it supports... -
Atera all-in-one platform IT management software with AI agentsAtera’s AI agents don’t just assist, they act. From detection to resolution, they handle incidents and requests instantly, taking your IT management from automated to autonomous.
-
5
SerpaeOS
A cute and educational x86 OS
...Contact us at serpaeos.devers@gmail.com Buy me a coffee! :) https://bmc.link/serpaeosdeL System Requirments: *4 GB Memory *4GB minimum PATA Hard Disk connected to the master slot on the primary IDE controller. *x86 processor -
6
XFreq
a UNIX GUI to monitor Core i7 & Core 2 processors
XFreq provides a GUI to monitor the Processor frequencies (including Turbo Boost), the temperatures, C-States; and to alter the operational features of the Intel Core i7 processor. XFreq is also programmed for Core 2 and other Intel 64-bits architectures. -
7
AntennaTuner
A remote symetric antenna tuner using switched relays.
This is project about DL3LAC's Antenna Tuner called "Christian-Koppler". The original tuner used an semidigital remote controller and 24line cable between the tuner unit and remote controller. I decided me to build the tuner unit and replaced the controller part by an ATmega MCU on both sides and linked them with cheap network cable. The used protocol between the controllers are RS422 based and is frame based with checksum. The tuner relays are switched each sepperate and the I/O unit are an two MCP23017 as I2C-Bus expanders.The MCU is an ATmega88 in a small housing. ... -
8
Open Source Rapid Fire mod for the PS3 SixAxis controller. This is meant to run on the PIC12F683 micro controller. This code was initially created and developed by Hyper999.
-
9
Stingray 3 is a high performance engine Sequential Electronic Fuel Injection and Electronic Ignition controller designed specifically for light experimental aircraft and off-road applications.
-
Desktop and Mobile Device Management SoftwareDesktop Central is a unified endpoint management (UEM) solution that helps in managing servers, laptops, desktops, smartphones, and tablets from a central location.
-
10
...Currently, the software runs on the CMUcam3 hardware platform, which is a NXP LPC2106-based board with an onboard CMOS camera and FIFO, MMC interface, serial UARTs, and servo controller.
-
11
Schematics and micro-controller code for a version of the scoring apparatus used in competitive fencing and a compatible remote control.
-
12
IR Remote Controller with PC/AT keyboard interface, works with mplayer in Linux and probably other softwares and OSes. Requires a specific hardware and firmware both still in beta test version. Since it interfaces with PC/AT keyboard no driver is needed.
-
13
A retargettable micro-controller and embedded system emulator architecture, providing common supports to emulate various types of micro-processors & devices on an x86 PC. Development of emulation for Arduino and various shields is just about to be launched in 2012.
-
14
Focus of this project is the development of an microcontroller/FPGA evaluation board. Basic characteristics as given below: - Philips LPC 22xx controller - additional FPGA, Xilinx Spartan - SD-Card interface for booting - additional IO-interfaces
-
15
Tecnotel is a project that seeks security and comodity to the end-user, controlling your house through the telephone line, internet or remote-controller. The software available controls the electronic-equipment and others.
-
16
Project to provide both software and hardware schematics to implement a comprehensive saltwater reef controller/computer.
-
17
-
18
WxMonitor: An Open Source Weather Monitoring System This is a project to develop a Ruby based client and server system for the purpose of communicating with a Micro-Controller based weather monitoring system and display the data in real time.
-
19
Tourk is a framework for developing programming games, where two (or more) people write game playing code (like Deep Blue) and a controller puts the two against each other.
-
20
An open source set of embedded software libraries in C, C++ and Assembler for robotics programming, targeting controllers using Motorola 68K/ColdFire & PowerPC micros. The initial target is the 68332-powered Mini RoboMind controller (www.robominds.com)
-
21
AKO provides hardware and software for rapid prototyping and development of robotic projects. It utilizes a distributed microcontroller network with a centralized controller.
-
22
Implementation of a amateur radio morse code/CW beacon controller for the embedded MCU card "hc908 daughtercard" by NJQRP (http://www.njqrp.org/hc908/index.html).
-
23
The goal of this project is to build a centralized domotic system. This project contents three parts: - An electronic part; - An embedded software part (PIC Microship controller); - A PC software part (Dotnet/Mono)
- Previous
- You're on page 1
- Next
