Search Results for "usb to ttl with pic"
Sort By:
Showing 25 open source projects for "usb to ttl with pic"
View related business solutions-
Easily engage and manage non-desk employees with Connecteam’s mobile-first platform that helps improve communication, enhance daily processes and increase productivity with custom checklists, forms, and reports. Schedule shifts and track accurate work hours with Connecteam’s automated GPS time clock and easily export approved timesheets to payroll. Connecteam helps you keep your employees sharp thanks to knowledge base centers and advanced training courses. Raise morale with employee recognition rewards and keep the entire company updated through the main news feed.
-
eloomi combines Learning Management (LMS), Onboarding, Authoring, and continuous Performance Management tools in a cloud-based solution. It allows companies to optimize skill training, onboarding and employee development with strong user experience to enhance productivity and employee satisfaction. As a white label solution, the platform can be customized to mirror a company's branding and logo.
-
1
Open Programmer
An USB programmer for PIC, dsPIC, AVR, serial memories
An USB programmer for various devices, including PIC, dsPIC, AVR microcontrollers, and various kinds of serial eeproms -
2
-
3
TFmini 3D scanner
Use tfmini lidar to scan your room and create a 3D file.
Requires this hardware list, see parts.txt for more info: TF-Luna Lidar Ranging Sensor, 8 metres x 4 WitMotion Controller Board x 1 Standard servo - 180 degrees x 1 PL2303 USB to TTL x 4 USB 3.0 Hub x 1 more info: timpearson5000@gmail.com -
4
RS485MODBUS V3.O
Software utility for STM8S103, R421A08, R221A04, R413D08 relay board
..., read sensors via TTL R4AVA07 7 Channel RS485 analog voltage sampler - Read 7 voltages vis RS485 PZEM-016 power sensor - Read mains voltage and current consumption vis RS485 Pelco-d PTZ control - Control pan tilt zoom via RS485 Huawei E3372 modem - Send sms via USB virtual serial port STM32 series WT Servo 16 - 16 channels servo motor control - Control servos via TTL timpearson5000@gmail.com -
Deliver a personalized customer experience with every interaction, across every channel, with uContact, net2phone’s cloud contact center solution.
-
5
FUI Audio DAC
FPGA-Based USB-Input Audio Digital to Analogue Converter
An open-hardware and -firmware project that implements a USB-input fully-digital class-D audio amplifier. All processing is done on FPGA, including the USB-physical, USB-SIE, HID interface, clock-recovery, bus voltage regulation, noise-shaping and PWM output. A Microchip PIC based remote control is also included. The remote maps to the media buttons of the USB HID interface. The volume control, next track, previous track, stop and play/pause functions are supported. -
6
STM32 machine language monitor
Machine language monitor program for the STM32F103C8T6 "Blue Pill"
... execute any subroutines in the flash memory. This project requires a serial terminal e.g. on Linux, minicom on a USB serial TTL adapter running at 9600 baud, 8bits, no parity. The usart port on the STM32 is at the other end of this hardware. Using TTL levels is easier that introducing RS-232 levels. The code experiments in read write memory should be subroutines and will be called by this monitor and a return in the user's code will return to this monitor program. -
7
picusb
USB Resources for Microchip Microcontrollers, libusb and libftdi
USB Resources for Microchip Microcontrollers and libusb, also libftdi and openocd binaries -
8
lxardoscope
Oscilloscope using ATmega328 or Arduino Uno for data acquisition
LXARDOSCOPE is a dual channel oscilloscope application for Linux, using an ATmega328 device for data acquisition, and a serial or a USB port for communication with the PC. The Look and Feel is close to a traditional oscilloscope. Sampling rate for version 0.95 is about 2350 samples per second, for each channel. Originally designed for Arduino Uno, but works best with an Atmega328 and a TTL/USB converter. *** NEW: a preamplifier is presented which provides an input range of -4V to +6V for DC... -
9
circuitmod
The Future of the Java Circuit Simulator
Circuitmod is a circuit simulator that extend the capacity of the original Falstad's Java Circuit Simulator into CMOS Chips, Led Arrays, Led Matrix and PIC Programming. The Horizon is limitless. Try today. -
Comply with ISO, FDA, and GxP regulations and be audit-ready with our cloud-based quality management system.
-
10
PyRadmon Reborn
PyRadmon, a Python script to use on both Linux and Windows.
PyRadmon Reborn. This project started after the original programmers quit supporting it. The project now contains support for audio*, has a version that supports two Geiger counters** and a cleaner, more stable code. * = PyAudio is used as library for the audio support. ** = The two counters both run in their own thread. UPDATE-2015-2: * Added timeouts to sockets to prevent crashing of the script. * Updated some comments. UPDATE-2015-1: Since there have been some passed time I decided to... -
11
Tardyon Drive AVR Stepper Controller
AVR-based single axis stepper motor controller
This project provides an AVR-based, USB accessible, single-axis motion controller that can fit into an USB-connector completely and therefore is probably the worlds smallest stepper motor controller. Here both, hardware schematics and all software components are provided. -
12
USB Parktronic Firmware
18F4550 PIC Controller Firware for our projects
Firware for a PIC controller that is used in USB Parking Assistant and in Logic Analyzer -
13
USB Logic Analyzer GUI
GUI for PIC 18F4550 based logic analyzer in Qt/C++
GUI for a Logic Analyzer that we used to reverse engineer hardware communication protocols and debug electronic circuits. Published for your refrence, you will also need to assemble a device using our free and opensource schematics and firmware -
14
usbpicprog is a Microchip PIC programmer with simple hardware: one PIC18F2550 and some components. It's therefore easy and cheap to build. Usbpicprog consists of 3 components: Hardware, Embedded software and a stand-alone program for Win, Mac and Linux.
-
15
PICC#USB
I2C, SPI,1WIRE & digital I/O protocol tester
This is both hardware (PIC microcontroller) and software (windows .exe) project. You can use it to test I2C, SPI,1WIRE, servo with a simple script editor that runs on windows PC and communicate over USB with PIC and your test circuit. -
16
IRK! Infrared Remote USB Keyboard
Control your computer with an IR remote
This is an open-hardware Infrared Remote Controlled USB keyboard, without keys, implemented using a PIC micro-controller and MikroC. IRK! enables you to use your LEARNING remote control to control any system that you can plug a USB keyboard into (Windows, Linux, Mac). Great for controlling a home theatre system such as MythTV, XBMC or Media Center. No drivers are required. You can program *any* USB keyboard function (with or without Control, Alt, Shift and GUI modifiers) to a button on your... -
17
PIC USB COM
Commication with PIC and USB from PC
This software sends the data from PC to USB Port using the HID Class. -
18
USB HID TERMINALv1.0
Communicates with USB using HID Class
USB_HID_Terminal v1.0 is a small program developed in Visual Basic 2010 Express Edition, which communicates with the device's attached to PC's USB Port. This Software is a major up-gradation of USB PIC COM. This software will connect only with the HID Devices having Vendor Id of 1234 and Product Id 1. http://www.youtube.com/watch?feature=player_embedded&v=aLdJ4Wm1qt8 -
19
BASIC interpreter for the 16bit PIC microcontroller 24FJ64GA002. The interpreter runs on the chip only, no compiler/tokenizer is needed. Communication with PC is done by USB-to-serial converter cable.
-
20
Serial COM Port Visual Studio C++
Demo of how to use visual studio for serial communication
Demonstration of using visual c++ windows forms to create gui for uart serial communication. you will need two usb to ttl converter these can be purchased from ebay for around $6 -
21
-
22
-
23
jPicUSB makes possible USB comunication between Java and PIC Microchips, by using a Java interface with JNI capable dll (recompiled mchpusb.dll).
-
24
PicBurner is a complete solution for programming Microchip PIC microcontrollers and maybe other microcontrollers and EEPROMs. The software will be build in Borland DS 2006, personality C++ and hardware will support RS232 and USB interfaces.
-
25
Robot Arm Control
Cross-Platform GUI to control multiple servos
The goal of this project is to create a cross-platform GUI to control servo-based robotic arms. The application will send position commands to multiple servos through serial/usb communication. This will be compatible with microcontrollers such as AVR, Arduino, PIC, etc. The gui will be designed and coded using C++ and Qt. It will be a combination of manual controls (Sliders) as well as graphical controls allowing mouse movements to control one or more of the servos. This project is really...
- Previous
- You're on page 1
- Next