Search Results for "transmitter"
Sort By:
Showing 50 open source projects for "transmitter"
View related business solutions-
Boost application security and continuity with SKUDONET ADC, our Open Source Load Balancer, that maximizes IT infrastructure flexibility. Additionally, save up to $470 K per incident with AI and SKUDONET solutions, further enhancing your organization’s risk management and cost-efficiency strategies.
-
ConnectWise SIEM (formerly Perch) offers threat detection and response backed by an in-house Security Operations Center (SOC). Defend against business email compromise, account takeovers, and see beyond your network traffic. Our team of threat analysts does all the tedium for you, eliminating the noise and sending only identified and verified treats to action on. Built with multi-tenancy, ConnectWise SIEM helps you keep clients safe with the best threat intel on the market.
-
1
Openwifi
open-source IEEE 802.11 WiFi baseband FPGA (chip) design
Linux mac80211 compatible full-stack IEEE802.11/Wi-Fi design based on SDR (Software Defined Radio). -
2
miRemote
IR Remote, Android phone with Ir emitter runs LIRC config file
Loads LIRC config files, displays remote buttons. Uses LIRC project core code to create waveform for a button. Uses Android phone IR emitter to send waveform. Can list, download, and use all LIRC config files in LIRC.ORG remotes database. Does not support LEARN IR Code yet. -
3
The Lantern Project
The lantern project is an ESP-based addressable LED strip controller.
The lantern project is an ESP-based addressable RGB LED strip controller. It consists of two ESPs. ESP32 serves as a remote, and ESP8266 is the receiver that drives the addressable RGB LED strip. The Lantern project offers its users 32 different modes, 14 lock screens, and a basic level of security (at least it prevents separate transmitter-receiver pairs from interfering with one another) GitHub page: https://github.com/Northstrix/Lantern You can find the tutorial for V1.1 at https... -
4
Linrad
Linrad (together with an A/D converter hardware) forms an SDR receiver
Together with hardware that can bring RF signals into digital form Linrad forms an SDR receiver. (A Software Defined Radio receiver.) There is also a transmit part inside Linrad that will form an SDR transmitter together with appropriate hardware. (The transmit side is still at an early development stage.) -
The only software you need to increase cash flow, optimize resource utilization, and take control of your assets and inventory.
-
5
ShiftRC
Simple cheap DIY RC receiver/handler.
..., and some more complex. a similar thing can be said for the controllers, I will soon upload the schematics and designs for a steampunk style controller. but for a more simple understanding a simple remote might be a transmitter(led, speaker, or antenna for example) a button, and a capacitor to stabilize the button because every pulse you send changes the state. however high precission control is possible. Use the project and schematics however you want it as long as it does NOT restrict others. -
6
cwdaemon
morse daemon for the serial or parallel port
This project is no longer actively developed on SourceForge. Its development has been fully moved to https://github.com/acerion/cwdaemon on 2024.08.03. ------ cwdaemon is a small daemon which uses the PC parallel or serial port and a simple transistor switch to output morse code to a transmitter from a text message sent to it via the udp internet protocol. The program uses the soundcard or PC speaker to generate a sidetone. Current version of cwdaemon is 0.12.0, it has been released in May... -
7
sidmon3
Sudden ionospheric distubance (SID) monitor
sidmon is a python program for receiving and recording submarine-transmitter signal intensities and directions in the VLF frequency range using a computer sound card. The intensities of these signals reflect the ability of radio waves at those wavelengths to propagate in what is essentially a waveguide formed by the earth and the ionosphere above it. Fluctuations in those signal intensities and directions often reflect daytime perturbations of the ionosphere by solar processes, such as solar... -
8
MicMute
MicMute
MicMute is a small program that will enable you to easily manage the level of a connected microphone. The application also supports push-to-talk thanks to the built-in 'Transmitter Mode'. While it runs minimized in the system tray, MicMute? can be controlled trough keyboard shortcuts you choose. The software uses tray notification balloons and it also has a sound signal option you can activate. -
9
SoDaRadio
SoDaRadio is a VHF/UHF all mode transceiver for the USRP
Moved to github: see https://kb1vc.github.io/SoDaRadio/ SoDaRadio is an allmode VHF/UHF SDR transceiver built for the Ettus Research USRP N2xx and B2xx software defined radio platforms. It is designed for use by amateur radio operators. It has been used as a general purpose receiver, and as an exciter/IF for microwave transverters. -
We design our technology to make workforce management easier. APS offers core HR, payroll, benefits administration, attendance, recruiting, employee onboarding, and more.
-
10
ESP32 Radio with analog control
Creating an sinole Webradio wit analog control and FTP upload
It is a simple web radio which should be built into a classic radio. It should be used in the same way as an analog radio. So loudness and transmitter should be usable via a classic button. To ensure stable operation, a 32k buffer is provided and the user interfaces (including FTP) are outsourced to core 0 so that the radio can work on core 1 itself. The project is divided into modules so that maintenance is made easier. Please open the ArduinoRadio10 project. -
11
rtlamr
An rtl-sdr receiver for Itron ERT compatible smart meters
Utilities often use "smart meters" to optimize their residential meter reading infrastructure. Smart meters transmit consumption information in the various ISM bands allowing utilities to simply send readers driving through neighborhoods to collect commodity consumption information. One protocol in particular: Encoder Receiver Transmitter by Itron is fairly straightforward to decode and operates in the 900MHz ISM band, well within the tunable range of inexpensive rtl-sdr dongles. This project... -
12
Ham Radio Projects
KB1OIQ Ham Radio Projects
This area contains files from a variety of ham radio related projects including: * Software and hardware mods for the BITX40 QRP SSB transceiver from India, including primitive voice synthesis from the Arduino Talkie library. * Software and hardware mods for the uBITX QRP SSB/CW transceiver from India, including voice synthesis using the EMIC-2 chip. * Hardware and software project to create an 80m ARDF transmitter using an Arduino and a Cricket 80a * My Arduino sketches for the Nano DDS... -
13
JMORP list URL of Webradio Stream from www.myoggradio.org. You may call an external Player - VLC for Windows - AUDACIOUS or VLC for Linux - with a selected URL by only pressing a button . JMORP needs Java SE 1.6+.
-
14
WAV Audio Compressor
Audio (dynamic) compression utility
... in noisy environments (vehicles) or to modulate a LPFM transmitter. -
15
PPM Channel Expander with Arduino
Futaba, Art-Tech, Transmitter PPM Channel Expander with Arduino
Futaba, Art-Tech, Transmitter PPM Channel Expander... 40 Mhz, 35 MHz transmitters with Arduino... -
16
JetiExTransmitterTelemetryLib
Protocol decoder for Jeti EX data output on JETI DC/DS-14/16/24
THIS PROJECT IS STILL BETA ! Decoder to process JETI EX telemetry data with Arduino. Connect your JETI Transmitter via "PPM Out"-connector to the RX-Pin of your Arduino board. Select "EX data stream" as data format on PPM-Out-Pin (Menu "Configuration/PPM con. settings") Current sample Sketch uses Serial-Output, so use it on "Micro Pro", "Leonardo " oder "Teensy", since these boards have multiple serial Interfaces. Examples for: - Pure decoding function - Streaming decoded data in JSON format... -
17
JetiExSensorCppLib
Simple C++ Library to send telemetry values via JETI DUPLEX EX
... shows demonstration values on your transmitter Display. Use Arduino IDE 1.6 or later. There are no dependencies to other 3rd-party libraries. Find it also on Github: https://github.com/Sepp62/JetiExSensor -
18
SmartPropoPlus - Turning your R/C transmitter into a Flight Simulator Joystick
-
19
NarrowBand DataTrans
Data transmission through low-tech communication media
Set of executable files for sending and receiving data / short multimedia files through a narrow bandwidth transmission media. The signal output to the transmitter is the sound card analog output socket while the received signal taken from the receiver is fed to a sound card analog input line. Targeted audience: * Short wave / long wave (narrow bandwidth) Amateur Radio enthusiasts * Experimenters of vintage transmission systems * People living in areas with absolutely no Internet and no 3G/4G... -
20
vsSolutionBuildEvent (vsSBE)
Control everything: Visual Studio, MSBuild Tools, CI, and more ...
https://github.com/3F/vsSolutionBuildEvent Advanced handler of the most events from MS Visual Studio and MSBuild tools. Compile and automate everything in the same manner even without VisualStudio. Full control and flexible multi-actions for basic pre/post events and other additional such as: CommandEvent, Errors, Warnings, Cancel-Build, Output-Build, Transmitter, Logging Ability to handle events for all subprojects at once from the whole solution as an Solution-Events or individually... -
21
ArKeyer
A beacon keyer built on a DigiSpark arduino module
This is a simple, very low cost, CW beacon keyer for amateur radio beacon transmitters. The code is written for a DigiSpark (ATtiny) from http://digistump.com/ which can be powered from a 5V supply or from a 7V to 35V source. The DigiSpark provides both a positive and a negative keying output for the transmitter. -
22
orvibo allone console
vb.net console app to script control Orvibo Allone
Orvibo Allone is a infrared receiver transmitter this vb.net console app permits to learn ir codes from existing remote controllers and script them to be run in batch file -
23
BTLE
Bluetooth Low Energy (BLE) packet sniffer and transmitter
BTLE is a free and open-source Software Defined Radio Bluetooth Low Energy (BLE) software suite. BLE sniffer. Besides sniff broadcasting/fixed channels, it can also track channel hopping of a communication link. Universal BLE packet transmitter. Besides BLE standard, it supports also raw bit mode to generate arbitrary GFSK packets. In this way, you can test non-standard protocols or standards under discussion before chipping in the market. -
24
The aim of the project is to allow remote desktop tramission for interactive 3d applications such as games or designer tools. Actually, this is a small open source counterpart of streammygame.com, without any restrictions. See http://www.youtube.com/watch?v=XBaTeyxqaxk
-
25
RedPitaya_RadioBox
#2 - Red Pitaya Ecosystem and Applications
#2 - Red Pitaya Ecosystem and Applications (dormant).