Search Results for "mechanical engineering"
Sort By:
Showing 281 open source projects for "mechanical engineering"
View related business solutions-
HubSpot is an AI-powered customer platform with all the software, integrations, and resources you need to connect your marketing, sales, and customer service. HubSpot's connected platform enables you to grow your business faster by focusing on what matters most: your customers.
-
Paligo is an end-to-end Component Content Management System (CCMS) solution for technical documentation, policies and procedures, knowledge management, and more.
-
1
FreeCAD
A free and open source multiplatform 3D parametric modeler
... is a multiplatfom (Windows, Mac and Linux), highly customizable and extensible software. It reads and writes to many open file formats such as STEP, IGES, STL, SVG, DXF, OBJ, IFC, DAE and many others, making it possible to seamlessly integrate it into your workflow. FreeCAD is designed to fit a wide range of uses including product design, mechanical engineering and architecture. Whether you are a hobbyist, a programmer, an experienced CAD user, a student or a teacher, you will feel right at home with FreeCAD. -
2
Kinetic.jl
Universal modeling and simulation of fluid mechanics upon ML
Kinetic is a computational fluid dynamics toolbox written in Julia. It aims to furnish efficient modeling and simulation methodologies for fluid dynamics, augmented by the power of machine learning. Based on differentiable programming, mechanical and neural network models are fused and solved in a unified framework. Simultaneous 1-3 dimensional numerical simulations can be performed on CPUs and GPUs. -
3
JPL Open Source Rover Project
A build-it-yourself, 6-wheel rover based on the rovers on Mars
The JPL Open Source Rover is an open source, build it yourself, scaled down version of the 6 wheel rover design that JPL uses to explore the surface of Mars. The Open Source Rover is designed almost entirely out of consumer off the shelf (COTS) parts. This project is intended to be a teaching and learning experience for those who want to get involved in mechanical engineering, software, electronics, or robotics. JPL is always looking to inspire the next generation of scientists, engineers... -
4
A cross-platform, open-source, alternative to NIST REFPROP. Based on reference-accuracy equations of state and transport property correlations for refrigerants like Water, CO2, R134a, Nitrogen, Argon, Ammonia, Air, R404a, R410a, Propane and many others. A selection of secondary working fluid properties are also available. Can also make use of REFPROP when available. In addition, calculations for Humid Air Properties based on ASHRAE RP-1485 are provided. Wrappers are available for MATLAB,...
-
Venn is a secure workspace for remote work that isolates and protects work from any personal use on the same computer. Work lives in a secure local enclave that is company controlled, where all data is encrypted and access is managed. Within the enclave – visually indicated by the Blue Border around these applications – business activity is walled off from anything that happens on the personal side. As a result, work and personal uses can now safely coexist on the same computer.
-
5
Simulation of Urban MObility
SUMO is a microscopic, multi-modal traffic simulation.
SUMO is an open source, highly portable, microscopic and continuous traffic simulation package designed to handle large networks. It allows for intermodal simulation including pedestrians and comes with a large set of tools for scenario creation. The code and the issue tracker can be found at https://github.com/eclipse-sumo/sumo/ The documentation can be found at https://sumo.dlr.de/docs/ -
6
FreeCAD
a parametric 3D CAD modeler
This is an official mirror of FreeCAD. Code and release files are primarily hosted on https://github.com/FreeCAD/FreeCAD and mirrored here. FreeCAD is a general purpose feature-based, parametric 3D modeler for CAD, MCAD, CAx, CAE and PLM, aimed directly at mechanical engineering and product design but also fits a wider range of uses in engineering, such as architecture or other engineering specialties. It is 100% Open Source and extremely modular, allowing for very advanced extension... -
7
AsterixInspector
A viewer for Eurocontrol Asterix files
AsterixInspector - displays contents of files in Eurocontrol Asterix format. Asterix is a binary data exchange format in aviation, standardized by Eurocontrol. -
8
The EdytorNC project now consists of four applications that can be useful for programming and operating CNC machine tools. EditorNC is a specialised text editor for CNC programmers. FTPserver is a simple FTP server for transferring cnc programs to and from the machine. SerialPortFileServer is a simple server for transferring cnc programmes to and from the machine via RS232 ports. ProgramManager is a program that makes it easy to search for cnc programs based on, for example, part number,...
-
9
Intelligent formulas: Numeric and symbolic calculations in LibreOffice and Openoffice Writer. The iMath extension to Libreoffice and OpenOffice enables numeric and symbolic calculations inside a Writer document. If your OS can install .deb packages, have a look at my PPA http://launchpad.net/~jrheinlaender/+archive/ppa
-
With the world of work changed forever, it’s essential to manage your workplace and assets together to effectively create a high-performing environment. The Eptura experience combines the power of workplace management software with asset management, enabling you to effectively operate your building and facilitate hybrid work.
-
10
SWAN is a third-generation wave model, developed at Delft University of Technology, that computes random, short-crested wind-generated waves in coastal regions and inland waters.
-
11
itom
itom - an Open Source Measurement, Automation and Evaluation Software
itom is an open source software suite for operating measurement systems, laboratory automation and data evaluation. One main application of itom is the development and operation of sensor and measurement system for instance in a laboratory environment. Therefore, the software has to be able to communicate with a wide range of different hardware systems, such as cameras or actuators and should provide a diversified and as complete as possible set of evaluation and data processing methods.... -
12
CalculiXforWin
Open-Source Multiphysics FEA (FEM) Package
CalculiX Binaries for MS Windows, made with CYGWIN and ARPACK libraries. CalculiX is most popular FEA open-source package (like Code-Aster and Elmer-FEM). it is comparable in features with most known commercial packages like ANSYS, NASTRAN, Abaqus, etc. Good for structural, mechanical, thermal and fluid applications (trusses, plates, frames, shells, solid bodies). It has powerful nonlinear capabilities (including tension/compression only material like concrete) and most types of analysis... -
13
MEE 1117 Fundamentals of Design
Projects & activities
Projects, activities for Fundamentals of Mechanical Engineering Design. -
14
SWASH is a general-purpose numerical tool for simulating unsteady, non-hydrostatic, free-surface, rotational flow and transport phenomena in coastal waters as driven by waves, tides, buoyancy and wind forces. It provides a general basis for describing wave transformations from deep water to a beach, port or harbour, complex changes to rapidly varied flows, and density driven flows in coastal seas, estuaries, lakes and rivers.
-
15
Make sure to download from the link below and not the big giant button. I'm not sure how to fix that, so if you know!
-
16
Generic data-assimilation toolbox written in java, with native (c and fortran) libraries for high performance computing. Provides tools to couple to your own model and a wide range of algorithms, ranging from parameter calibration to Kalman filters.
-
17
Insensitive
NMR spin dynamics simulation
Insensitive (Incredible Nuclear Spin EvolutioN SImulation Tool Intended for Visual Education) is an application to simulate the NMR experiment based on the quantum mechanical density matrix formalism. It is available for Mac OS X 10.6 and above and iOS 5.1.1 and above. Please refer to the paper published in Concepts In Magnetic Resonance, 2011, 38A (2), 17-24. -
18
PLEASE NOTE: There is a complete installer available if you do not have CVI installed. If you do have it, you can simply download the source files and run them. The following program was built as a final evaluation project for Programming for Mechatronics Course for my BSc. in Mechanical Engineering.
-
19
EBSP Indexer
GUI for processing and indexing EBSP from SEMs
EBSP Indexer is a graphical user interface that allows for processing and indexing of Electron backscatter patterns which are generated by scanning electron microscopes. Its goal is to make the rich functionality of the open-source library kikuchipy more accessible to users, without requiring knowledge of python or the library itself. Contribute by using our DOI: https://zenodo.org/record/7925262 -
20
Calcpad
Free software for mathematical and engineering calculations
... such as calculation notes. It can help teachers to prepare calculation examples, papers, manuals, books etc. Students can use it to solve various problems, prepare homeworks, phd theses etc. After installation, you will find in your documents folder a lot of examples for solving different mathematical, mechanical and structural/civil engineering problems. If you like Calcpad, you can donate ♥ the project on GitHub and help for its development: https://github.com/sponsors/Proektsoftbg -
21
TFEL/MFront
TFEL/MFront introduces DSLs based on C++ to handle material knowledge
The TFEL library is a collaborative effort of the French Atomic Commission and Électricité de France. TFEL mostly includes the MFront code generator. MFront is based on C++ and provides several domain specific languages which were designed to simplify the implementations of new material properties, mechanical behaviours and simple material models. A particular focus was made on mechanical behaviours which are by essence more complex and may have significant impact on the numerical... -
22
pfcalc is a pipe friction calculator using the Darcy-Weisbach equation. gpfcalc is a Gtk front-end for pfcalc. Qpfcalc is a Qt front-end for pfcalc.
-
23
Sezioni
Python tool for section property evaluation and stress calculation
This software is a basic tool for section property evaluation and stress calculation, written in python. The section can be imported or input by points and then can be modified moved, rotated etc.. Area and section inertia can be exported. Loads can be applied (multiple load cases can be imported) and the related stresses are calculated by mean of De Saint Venant formulas. Results are plot with selectable color maps. Point results are listed and may be exported. Section can be also input in... -
24
Funi
Python script for calculation of deflection of elastic ropes.
This software implements the equations of the catenary curves, in adimensional formulation. The theory is applicable only to elastic ropes with uniform section. Any number of hanged masses or hangers may be input. The schema may be imported and exported. The graphics of deflections and tensions are shown with reference to X coordinate, while the graphic of stretches is shown with reference to the curvilinear coordinate. The solution is found by iteration, by mean of Scipy Minimize functions... -
25
Ship, Tow-Tether and Moonpool Models
Linked Excel workbooks for preliminary study of the title systems
The file “Ship, Tow-Tether and Moonpool Models.zip” is a collection of linked macro-enabled Excel workbooks suitable for conceptual to preliminary design of the title systems. The file “Block Diagram.pdf” shows linkages and summarizes each workbooks’ major features. FD and TD at the end of a file name denotes frequency domain and time domain solutions, respectively. Except for the moonpool TD model, which is a solution to the nonlinear equations of motion for the moonpool piston mode, TD...