Search Results for "gps receiver simulink"

An open source software-defined Global Navigation Satellite Systems (GNSS) receiver written in C++ and based on the GNU Radio framework.

NMEASIM sends NMEA 0183 sentences to a navigation SW such as OpenCpn via a serial com port or a UDP channel. These NMEA sentences simulate data coming from a GPS(sentence $GPRMC...) and an AIS receiver(sentence !AIVDM...) All the parameters : name, mmsi, initial position (lat/long), COG, SOG for my boat as well as for AIS targets, and I/O configuration (com port...) can be edited in the 'datasimul.json' (file created by the app with default values in V1.0) Just Download the nmeasim.exe...

Reverse engineered communication protocol for the Mala ProEx and Easy Locator GPR implemented as a CLI & GUI running on unix systems. The communication protocol was ported to a graphical user interface applicable to embedded systems through the use of the Qt toolkit (tested on Armadeus Systems APF27 board). The GUI includes GPS datalogging capability assuming a receiver providing NMEA sentences at 4800 bauds is connected to the host computer. Because the software requires access to the raw...

eGPXviewer is a GPS track viewer capable of summarizing key data of input track GPS series, displaying the track's altitude & speed profile and provide interactive 3D perspective views of it. The GPS track data should be input from a GPX exchange formatted file which is typically obtained by downloading a GPX file from a GPS receiver/tracker (e.g. Garmin™) or an iOS™/Android™ tracker app. The GPX exchange format is a standard output file format available in most GPS tracker devices...

NTSD connects NTS (Network Time Security) and NTPD (Network Time Protocol Daemon), so that existing algorithms and mechanisms of NTPD can still be used and only the ethernet packet exchange and the signing and verification needs to be done by NTSD. Thereby, it is ensured that on the one hand, clock filter, selection, cluster and discipline algorithms can be used by NTS clients, and on the other hand NTS servers can make use of NTPD‘s reference clock support to use i.e. a GPS receiver as time...

This program edits GPX files of individual geocaches, downloaded from http://www.geocaching.com and marks them as "geocache found" id the GC code of the geocache is present in the My Finds Pocket Query file, also downloaded from geocaching.com. I created this program because my Garmin Oregon 600 GPS receiver stopped marking geocaches as found. So instead of relying on the Oregon to keep track of found geocaches I run this program. The GPX icon: By Ezekiel53746 - Derivative work...

Yet another nice GPS-Receiver for LCDd. Hardware-Support: 4lines * 20 Character LCDs. Own modifikations are possible to change it to x lines * 20 charakter-Devices Neccessary: Configured and started LCDd-Daemon or other what can receive messages like widget_add widget_del and so on. Send me an E-Mail to: dj6382zulu <at> gmail.com for bugs and hugs Only Bash is required Included is an init-script to run these scriopt as a "daemon".

Displays radar style screen of GPS satellites. Uses input from NMEA compatible receiver. Input is taken from /dev/ttyS0 or /dev/ttyUSB0, can be changed by command options.

tool collection for communication with GPS devices via GARMIN protocol. A graphical frontend for visualization of all gps-data and remote control of the GPS receiver is included. GPS-Earth also uses undocumented features that might or might not work wit

This app can record and draw a route from your steps using a GPS receiver. It can also save the data from GPS and load them; Lazarus, SynaSer and OpenStreetMap service has been used.

OpenGPSX Lazarus Component for GPS Interface programming. Decode NMEA messages, Display GPS skyplot view, Display GPS signal strength, Display target navigation.

Substitutes the missing GPS information in Garmin TCX files when devices lacking a GPS receiver are used to collect training data (Garmin FR 60, heartrate and pedometer only). GpxTcxWelder integrates GPS info from a GPX v1.1 files into TCX files

np is a compact NMEA parser that aims to be compatible with most gps receivers. Data can be aquired from STDIN, gpsd, or directly from a gps receiver. The output format is controlled by user-definable style sheets.

OpenSource GPS is software for x86 PCs that allows you to acquire, track and demodulate signals from GPS satellites. OSGPS requires a Zarlink GP2021 12 channel GPS correlator chip or software receiver hardware such as the GPS1A, see www.gpscreations.

GPS-equipped cell phone works as bluetooth NMEA-183 GPS receiver

LoroDux is planned to be a OSM and Java based multi platform navigation software for mobile devices for blind and visually impaired persons. Release of first alpha version was September 10, 2010. http://wiki.openstreetmap.org/wiki/LoroDux

This work presents an objected oriented system design and modeling (OOSDM) framework for reliable and flexible system design. *Can generate raw signals at desired IF. *Use GPSTk Libraries * Allow multiple receiver simulation * 12 Channels

GPS 1A sampler. This command-line utility is compatible with the GPS Creations GPS 1A USB receiver and streams IF samples to file. Command line arguments are: Filename (including extension and full/relative path) RecordDuration (in sec, eg. 100.0 ).

Sharc is used to download data from locally and remotely connected GPS receivers. It currently supports Several different receiver types

Jeocaching is a j2me based software for the famous geocaching game (see geocaching.com for details) for J2ME enabled devices (most mobile phones) with bluetooth GPS receiver. Keywords: location based services, geocaching, GPS, j2me, bluetooth

This little tool lets you turn on and off the GPS functionality of a DELL 5530 mobile broadband mini pci-e card, which is also known as Sony Ericsson MBM F3705g. Furthermore it shows the NMEA output of the GPS receiver.

fastgps is a GPS software receiver written in c++, which aims to be fast. Like all software receivers, fastgps performs all signal processing in software, which allows for easy tweaking at all stages: correlation, acquisition, and navigation.

Mobile phone tool for high-precision GPS tracking (supports only external BlueTooth GPS receiver).

MerakoGPS is a set of software for Merako-series board aiming at GPS receiver development. MerakoGPS runs on a flexible Merako-series hardware board which uses a CycloneIII FPGA to accomplish the correlator function. see http://www.hyrising.com.

Locator is a system for J2ME enabled phones that is able to keep track of the mobile device position (with an equipped GPS receiver), using Google Maps API on server side.