Search Results for "attiny"

...This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset

PJON® (Padded Jittering Operative Network) is an experimental, Arduino-compatible, multi-master, multi-media, software-defined network protocol that can be easily cross-compiled on many microcontrollers and real-time operative systems like ATtiny, ATmega, SAMD, ESP8266, ESP32, STM32, Teensy, Raspberry Pi, Zephyr, Linux, Windows x86, Apple and Android. PJON operates on a wide range of media, data links and existing protocols like PJDL, PJDLR, PJDLS, Serial, RS485, USB, ASK/FSK, LoRa, UDP, TCP, MQTT and ESPNOW. PJON is an experimental network protocol stack crafted in 10 years of research and experimentation. ...

Arduino support for almost every classic tinyAVR device! Supports ATtiny 1634, 2313/4313, 24/44/84, 441/841, 25/45/85, 261/461/861, 87/167, 48/88, 43 and 828. Supports programming vis ISP, Serial (Optiboot - all parts with >4k flash, and all parts with 4k flash for which an 8k version is available) or VUSB (Micronucleus - where appropriate) There are 272 different versions of micronucleus built (and part of the 2.0.0-dev branch now), and optiboot will dwarf that number!

16bit software pwm on attiny 13

If two or more people are responsible for something, either both do it, or none. Less often it only gets done once. This is an AVR ATTiny84 project that has features like putting the microcontroller to sleep to save battery. One button is to change from AM or PM, and the other is to turn on one of the LEDs representing the current choice for 5 seconds. The unit then goes to sleep, and the LEDs are off. It is powered by an 18650 and I put it all in a medicine bottle. A description of...

This is a simple, very low cost, CW beacon keyer for amateur radio beacon transmitters. The code is written for a DigiSpark (ATtiny) from http://digistump.com/ which can be powered from a 5V supply or from a 7V to 35V source. The DigiSpark provides both a positive and a negative keying output for the transmitter.

The webLED is an example for v-usb and libusb to control a ATtiny LED via a Webpage.

Opensuse 12.3 RPM (86_64) package for Gavrazm Version 3.3 . A command line assembler for all AT90S-, ATtiny- and ATmega types of microcontrollers of ATMEL, with many extended and new features. View the ReadMe.Txt for more informations on features. New Version 3.3 Only bin file, which during installation copied in /usr/bin/ Compiling from Paskal source is too large. (fpc and lazarus very big) Introduction to the use and some notes on special features of gavrasm: * http://avr-asm-tutorial.net/gavrasm/GAVRASMI.html (English) * http://avr-asm-tutorial.net/gavrasm/gavrasmi.html (German) For more informartion see: * http://avr-asm-tutorial.net/gavrasm/index_en.html (English) * http://avr-asm-tutorial.net/gavrasm/index_de.html (German)

This software supports programming of Atmel microcontrollers 89Sxx ('51), ATtiny, ATmega and 90Sxx (AVR). It can erase built-in Flash and EEPROM memories as well as read and program them. ISP Programmer also supports serial Atmel DataFlash memories.

Atmel AVR Assembler for all platforms. Compatible with Atmel's own assembler. Extra macro features, auto type conversion for macros, conditional assembly, creates .coff files for debugging, special 100% identical output compared to orig. Atmel Assem

Visual GUI programmer for Attiny26 microcontroller for outputting assembly, assembling into hexedecimal and uploading to hardware with an intuitive interface (Tekbots-OSU).