Project moved to https://github.com/owfs/owfs/
Please note that OWFS source code, and all Issue/Tickets/merge requests have now been moved to https://github.com/owfs/owfs/. Developer mailing lists will still be kept at Sourceforge. ---- OWFS -- 1-Wire file system. Use the Dallas 1-Wire and iButton chips with standard filesystem commands. Create temperature loggers. Monitor everything. OWHTTPD -- same system, only used as a light weight web server. OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use...
A Python module to control the GPIO on a Raspberry Pi
...-time performance and predictability, buy yourself an Arduino! (see http://www.arduino.cc ) Note that the current release does not support SPI, I2C, 1-wire or serial functionality on the RPi yet. This is planned for the near future - watch this space!
Open Source for Internet of Things
An Open Community in the Home Automation and Domotics space. We believe an Open Source approach can revolutionize the way people create, install, and maintain software in the industry. Our panel technology integrates with your favorite protocol and runtime hardware through Open Source software. We open up the front-end and support a unified panel and visual programming model. An installer can pick and choose hardware products from different vendors and still present one panel UI to the...
domotica facile open economica
domotic-dream è il sistema di domotica basato di server LAMP e ideato per gestire moduli e apparecchiature su bus 1-wire, modbus 485.
1-wire based boiler/DHW/distribution heating system controller
bctl is a C++ state-machine based boiler controller utilizing a 1-Wire bus for sensors and I/O. It implements a multi-loop circulation/distribution controller targeting a dual boiler system for combined wood/fuel based heating. The wood fired boiler system utilizes hot water thermal storage and indirect heating of domestic hot water during firing. It includes provision for dumping excess heat to the distribution system, as well as provision for heat recovery during a cool-down cycle...
Smart Home Irrigation System
The project contains the following modules: * Main Controller Module which is responsible for scheduling and switching the water pumps, monitoring the water level and temperature, and reading the Soil Moisture Sensors. The module has a 4 line alphanumeric LCD that makes the system easy to use. * Sensor Controller Module is attached to the Main Controller Module via RS232 interface. This module is the master controller for the Soil Moisture Sensors and also contains a Dallas 1-Wire interface...
STM-32 code for IR-spectrometer management
This is a project of IR-spectrometer controller. It based on STM32F103 chip with a lot of peripheral devices (1-wire thermometers, stepper motors, platinum thermistors and so on). In future I hope to add here schematics of full control system for this device.
Fußboden Heizungssteuerung unter Linux mit GUI
Heizungssteuerung für Fußbodenheizung auf dem Raspberry PI unter Linux mit Touchscreenbedienung und 1-Wire Sensoren.
Oww (One-Wire Weather) is a server and client for Dallas Semiconductor / AAG 1-wire weather station kits.
The Android-smartphone universal television remote
The WiRe project seeks to provide android smartphones with universal Infrared (IR) television remote control functionality. The limitations/scope of this project include: 1. Android application will be restricted to a minimum Android Operating Sytem of Android 4.2.2 2. Data communications will be conducted over a Wi-Fi network 3. The embedded device will be built utilizing the Beaglebone Black as its core 4. The Final product will be capable of conducting common television controls
Raspberry Pi Driver for an Arduino SEEEDStudio Relay Shield.
Driver for Arduino SEEED Relay Shield. Digital connections to Raspberry pi: * Connect 5v pin to 5v pin from Raspberry pi. * Connect ground to ground. * Connect 2 GPIO pins to digital inputs. * Options: SEEED pins 4 thru 7 operate relays 1 thru 4. Power connections to motor: Wire the motor between the common pins on 2 of the relay outputs Wire the motor power (+) to the normally open pins (NO) of the 2 relays Wire the motor ground (-) to the normally closed pins (NC) of the 2 relays...
Open source projects in indrustrial applications
The project involves the implementation of a network of temperature sensors using the 1-wire bus. Software implementations to collect and visualize data using FLTK library.
WeatherMonitoringStation monitors environmental data
WeatherMonitoringStation is BeagleBone/Embedded Linux based software written in C++ intended to read, monitor, share and display environmental data such as temperature, humidity, wind speed etc. At this stage of development, temperature is measured using a DS18B20 sensor and sent out via standard output and/or a TCP/IP connection. Additional features will be implemented in due time. Recommended setup: * Eclipse with CDT. * GNU toolschain for ARM. * Oscilloscope. * Open collector buffer as...
Serial and TCP terminal for engineering and debugging
Serial terminal program for engineering. Ideal for development, reverse engineering, debugging, datalogging and capture, and automatic test. The website is a comprehensive manual for Realterm. It has an comprehensive ActiveX/COM automation support so it can be used a serial component by other programs. An extensive commandline interface supports batch files and simple automatic test programming. Commands can be sent to running instances, and commands can be stored and run in files. ...
Scada for Home Automation
Temperature control automation using inexpensive 1-wire sensors and switches.
Step-by-step instructions for making your HVAC (Heating, Ventilation & Air Conditioning) system state-of-art. Covers airflow balancing, temperature control & zoning, energy conservation measures, remote access, 1-wire, XBee devices, home automation
surfplot3d plots the graph of a 3-dimensional surface
surfplot3d accepts the equation of a 3-dimensional surface and plots the graph of it. The features include: 1. rotate the surface by dragging mouse 2. view as solid or wire-frame model 3. use two different colours for front and backward surface 4. edit every aspect of the surface 5. export the surface as a bitmap
1-wire slave for PIC microcontrollers. Supports SHT1x and SHT2x Sensirion humidity sensors. Programmed in C for PIC16F84A
The serial LCD module using ATmega8 along with easy arduino library.
serialLCD is Arduino based open-source project. It contains ATmega8 with given firmware file & the arduino library. The ATmega8 can be replaced by ATmega168/328. ATmega8 uses its 8MHz internal oscillator to reduce hardware (atmega8 no-xtal bootloader is used). The arduino library uses SoftwareSerial internally to communicate ATmega8 via digital pin 6 (only for uno/duemilanove or clone with atmega8/168/328, not for mega & due). Only one wire simplex serial communication at baudrate 9600...
Python framework to automate your home. Plugins for: KNX, 1-Wire and counting...
Server Room Environmental Monitoring
Perform environmental monitoring of a large number of server room racks. The solution monitors 48 racks. Each rack having 3 temperature sensors. Environmental data accessible a RESTfull interface. Individual sensors addressable via SNMP. The solution is comprised of a custom PCB containing a ATMEGA328P with UNO bootloader. The PCB called envmon board collects the environmental data and outputs it to a Raspberry PI. The Raspberry PI is the head unit providing network access to the data and...
A C++ based lightweight, non-invasive SCA (Service Component Architecture) runtime. Optimized for the use in the embedded domain. We are proud to announce release 0.8 of Trentino Release 0.8 adds a major feature to Trentino. With Service discovery, configuration, deployment and operation of Services on devices is made simple and cost efficient.
PHP tool to display graphs and stats based on temperature readings stored in MySQL from 1-wire or any source of data. Also supports alarms, mobile access, and logging data from digitemp. Works in any browser.
This project (osgi4ami-tecnodiscap) comes from the branch revision-3 of the osgi4ami project as a name standardization process, following osgi4ami-monami project creation. This project becomes the Universidad de Zaragoza (Tecnodiscap) Implementation.