Search Results for "can bus" - Page 4

This project is to create a distributed power grid formed by small DC power nodes and connected to each other via a common 400 Volt DC bus. There are many components needed to create this system and I have begun by writing a simulation. In addition a wireless communication protocol is also being developed using Arduino and inexpensive transmitter and receiver modules. Simulation ---------------- A BASIC language implementation (using Basic256) of a 3 node distributed DC power system...

"Onewire Optocoupler" is a small firmware for Atmel AVR microcontrollers which makes it act as a read/write data separator for the Dallas/Maxim Onewire bus system. This can be used for creating an opto-isolated onewire bus, where the host interface hasn't built-in opto-isolation, e.g. the popular DS9490 USB adaptor. It's also possible to isolate bus segments from each other. Unlike existing solutions, only a minimum number of easy to get electronic components are required.

This is an Arduino library for the MCP2515 CAN BUS driver..

OSGi.NET, a dynamic modularization framework, which is a .NET implementation tightly based on OSGi specifications from OSGi Alliance, is designed and developed by Xi’an UI Information Technology, Inc., in China, from 2008, it's totally free and can be redistributed with any production. This project is mainly focus on explaining how to develop OSGi.NET based application, and how to integrate with third part libraries to speed up our development.

Being powered with cell phone battery, this board can drive small toys - up to two DC motors, several input/output pins, discharge control.

Teo & Tea has been created to permit a large scale of functions with a Velbus installation. It's a domotic managment program that can show statistic, show temp graph, etc. There is a server that can send/receive frames from Velbus bus and receive/send them to an IP network.

A very easy-to-use but complex Gate-Simulation.You can simulate various gatters like AND, NAND, OR, NOR, NOT, XOR. And also build Flip-Flops, Full Adders and other compley structures. In other words its a register-Transfer Simulation of Hardware-Processes. There are also 2 Applet-Versions - the full Version and a only-Display-Version ---------- USEFUL TIPS: ---------- Always enter the Edit-Mode (swiss knife) bevor editing something ;) [!! IMPORTANT !!] Try out...

The aim of the project is to develop opensource multifunctional 7" touch screen computer for cars with following functions: * GPS Navigation * GPRS communication * Bluetooth Hands-Free Telephone * CAN bus for dysplaing car diagnostics data * Advance HI-FI sound processor and audio output * Audio and Video playback * State of the art GUI

This device driver implements KMDF based virtual bus driver and generic virtual disk hosted on it. Users can add virtual disks to Windows OS which are then seen and managed by OS as generic, regular disks. Virtual disks are plug in/out with cmdln utility

The SCSI Bus Analyzer Solution (scsitrace) is a Linux device driver that can be enabled on-the-fly to capture protocol traces trafficking across SCSI-based storage devices.

Homeautomation project based on CAN bus network.

This project is about student or school bus Web information system Development.This software can help senior high school to manage the school bus.You can view the website as : http://163.16.72.3/sbwis/ . But the software is only for chinese(Big5).

Driver Logger is an Open Source port analyser. The program is designed to monitor in/out traffic on a variety of bus ports such as USB, Parallel and Serial. The program logs the traffic and can also open, list, categorize and search through the logs.

CAN Remote Automation and Control with the AVR Set of tool for Web based Home Automation over the CAN-Bus including firmware and PCB.

Gstd is a GStreamer framework controlling audio and video streaming using D-Bus messages. Qt applications, web interfaces, and GStreamer element test suite show different ways the framework can be utilized.

A Project from the Fachhochschule Dortmund (University of Applied Sciences and Arts): A Roboterplattform based on the ATmega2560 Mikrocontroller with FreeRTOS.

Students Research Center (Schuelerforschungszentrum) - Fieldrobot Project - Ueberlingen, Germany. We try to create a field robot which can drive through a maize field on its own. We use the OpenCV library and the CAN-Bus Technology.

3D advanced and realistic bus simulator. Reefer to http://virtualbus.info and http://forum.virtualbus.info for more details.

The C-Bus Module is used to provide a C-code API between a Clipsal C-Bus PCI interface, and an application program. Application programs can be on small embedded micros with no OS and only a few K of RAM, thru to Windows & Linux.

This project intends to issue a universal remote controller based on Bluetooth connectivity. The client side runs on every mobile phones supporting Java ME. Many applications can be controlled on the host, as long as they furnish a D-Bus interface.

This unofficial project consists of a proxy server that scrapes mybustracker.co.uk to provide the data via RESTful JSON api. The other component is an Android application that can query the server to display live bus information on an Android phone.

Piggyback fuel injection controller for gasoline engines.

mmapper allows to access every resource attached to the machine. It can read and write any physical address on the memory bus, any I/O port and any field of the PCI space configuration of any peripheral.

IBusBox is a open Source BMW/Rover/Mini I/K-bus real time network stack written in ANSI C targeting mainly 8 bit microcontrollers. It has been developed on the AVR ATA6613. You can use this stack for your own IBus extensions e.g. a mp3-Player.

lysis is working on a features rich home automation system that ranges from CAN-bus, 1-wire and RF up to a HTPC; both hardware and software are addressed to make the really smart home; the domotics will provide energy saving, comfort, flexibility, safety