-
Sorry, the above results were with this graphics board (S3 Trio), not the Riva 128.
2009-08-24 02:58:31 UTC in PIAPARA LiveCD
-
3 of 5 points. Works.
Good quality on multisync monitor in both, framebuffer console and accelerated directfb.
No tearing artefacts when using integer stretching.
Geometry slightly off. Picture is too wide on all games I tried.
Heavy flicker on MAME messages (game info box).
Could not get it to work with a PAL TV and VGA-to-Scart cable.
2009-08-24 02:51:10 UTC in PIAPARA LiveCD
-
0 of 5 points. Does not work.
Blank screen with multisync monitor with both DirectFB and framebuffer console drivers.
2009-08-24 02:21:14 UTC in PIAPARA LiveCD
-
0 of 5 points. Does not work.
Blank screen with multisync monitor with both DirectFB and framebuffer console drivers.
2009-08-24 02:12:44 UTC in PIAPARA LiveCD
-
Also known as MCP61P, MCP68, GeForce 7050 or NV44. Used mainboard is a AsRock NF7G.
0 of 5 points. Does not work.
Blank screen with multisync monitor with both DirectFB and framebuffer console drivers.
Other settings (worked on same machine with different graphics card): high pixel clock, vsync, integer/fractional stretching, no interlace/doublescan.
If there is anything I can help...
2009-08-24 01:57:09 UTC in PIAPARA LiveCD
-
3 of 5 points. Works.
Works well with CRT computer monitor.
Works with PAL TV via VGA-to-Scart cable.
Frontend too dark on TV in fb console modes.
Interlaced mode seems to work, but my TV showed wrong position and flicker.
Doublescan mode seems to work, my TV showed the middle of a double size image.
Heavy tearing artefacts in all modes in vertically scrolling games.
With...
2009-08-24 01:30:39 UTC in PIAPARA LiveCD
-
I would like to collect information about the compatibility of Piapara LiveCD with graphics hardware. Maybe this can help deciding which card to use and/or pinpoint possible problems.
Please share your findings.
2009-08-24 01:18:38 UTC in PIAPARA LiveCD
-
Ok, installing an ISO image to an USB flash drive is simple enough with UNetbootin :-). Thank you very much for the link.
But I cannot seem to get it to work properly. I get the boot manager screen (syslinux) and boot messages, but after that I only get a black screen with some flicker and nothing more. The same ISOs do boot nicely from CD.
I suspected the order of the USB devices (boot...
2009-08-24 01:03:22 UTC in PIAPARA LiveCD
-
Sorry, my suggestion above does not match the error you submitted. But probably your current directory was not the topmost of the Piapara installation hierarchy so the above solution does still apply.
2009-08-23 18:36:30 UTC in PIAPARA LiveCD
-
Sounds like you tried to open piapara-livecd-generator.jar and your OS tried to run it without the -jar parameter. Use makecd.bat (Windows) or makecd.sh (linux, Mac?) instead and you should be fine.
2009-08-23 18:33:34 UTC in PIAPARA LiveCD
