-
I now have everything working and I'm trying to plot a couple of temp devices as a test setup.
wx_plots runs and generates 5 boxes with red dots.
wx_plot says "and provide for a different set of sensors."
I guess I'm not clear what this means i.e. what needs to be edited?.
2009-09-27 18:41:54 UTC in One-Wire Weather
-
The short message is SUCCESS. Unfortunately, I not sure why. Here's the story.
I looked at the directories and nothing was unusual with ls -al
but, I deleted the devices directory anyway and ran gdb and stop at different point. I tried deleting the setupNG directory and owwnogui ran successfuly just as you described. I changed diver to USB and did search succesfully.
BTW...
2009-09-27 17:14:57 UTC in One-Wire Weather
-
My ubuntu is a quad core 64-bit just a little david & goliath here <grin> I didn't expect the owwnogui to run but it was an interesting test.
The executable size difference did surprise me.
Here is the gdb info
(gdb) run
Starting program: /opt/bin/owwnogui
Program received signal SIGINT, Interrupt.
0x402eca14 in read () from /lib/libc.so.6
(gdb) bt
0...
2009-09-26 21:49:05 UTC in One-Wire Weather
-
I certainly agree it is very strange. I get no message at all from owwnogui -i just a blinking cursor for a couple of minutes and then TERMINATED and I'm back at my root prompt.
my latest attempts don't even get me TERMINATED, just a blinking cursor again.
What is so strange is that every other basic command works. Digitemp works. Nano works for editing. I have created a second...
2009-09-26 19:24:12 UTC in One-Wire Weather
-
Interesting
I used the ipkg oww so I don't know the ./configure used
I am ssh as root into unslung
I have those directories and made sure both are a+rw.
I put devices into devices dir and file is a+rw
same file is .oww_devices in /root director
owwnogui -i after a couple of minutes comes back TERMINATED
well at least ends without ctl-c.
2009-09-25 14:55:42 UTC in One-Wire Weather
-
Thanks for response Simon
Yes
/opt/share/oww/devices file has line
driver USB
owwnogui -i still does not run
is this where oww looks for the devices file?
I also put a copy in /opt/share/oww/setupNG just in case
there is no setup file of course until -i runs I guess
BTW, I also tried running oww on my ubuntu system
took my quite awhile to find the .oww_devices file in home...
2009-09-25 13:05:45 UTC in One-Wire Weather
-
Update
digitemp works and finds the devices
digitemp_DS2490 -i
DigiTemp v3.5.0 Copyright 1996-2007 by Brian C. Lane
GNU Public License v2.0 - http://www.digitemp.com
Found DS2490 device #1 at 002/003
Turning off all DS2409 Couplers
....
Searching the 1-Wire LAN
103594B801080005 : DS1820/DS18S20/DS1920 Temperature Sensor
284291870100008B : DS18B20...
2009-09-24 01:26:56 UTC in One-Wire Weather
-
I have look through all of the OWW pages and can't find a
solution.
I'm running a new NSLU2 and want to run oww with a Hobby Boards USB to DS2490 interface
I have Unslung'd (ver 6.10) and everything seems to work great. I've
installed SSH. I installed oww with ipkg
I do a remote login as root via SSH and run owwnogui -i and it "hangs"
with a blinking cursor. No messages...
2009-09-19 13:57:18 UTC in One-Wire Weather
-
Made a few changes on kpsk 1.2rc1.
Replaced the admin/ folder for proper compilation under kde 3.5
Redacted a few debian files and so on..
Changes provided by Sebastian Muszynski, thanks
I've checked compilation on Fedora Core 6.
2007-01-01 16:43:13 UTC in KPSK
-
oldcyberdude committed patchset 313 of module kpsk to the KPSK CVS repository, changing 1 files.
2005-12-03 12:44:46 UTC in KPSK
