-
Version 2.3.3 - /configs/smithy/924.ini - Ubuntu Hardy (standard install from CD)
Like the summary says, L1 or L3 in a G76 block results in pauses during the coordinated moves. Changing only the L word (to L0 or L2) results in smooth wonderful motion. The test program is examples/g76.ngc and the block in question is line #102.
2009-10-24 22:21:57 UTC in Enhanced Machine Controller
-
Environment: Ubuntu/EMC 8.04-- EMC2.3.3 -- AXIS -- Mesa 5I20 Card
What Happens: After homing the position displays read X0.0000, Y0.0000, and Z0.0000, even though there are offset values in the emc.var file for the G54 (default) coordinate system. If a program is loaded and run, the part is machined correctly, but the position display is still wrong. It appears that the machine position is...
2009-08-20 15:21:51 UTC in Enhanced Machine Controller
-
Prior to homing all axes, some operations can't be performed, so their associated widgets should be disabled. Since they are not disabled, activating them results in an error message of, "Can't issue MDI command when not homed". The following widgets are affected:
Menu/Machine/Run program
Menu/Machine/Step
Menu/Machine/Zero coordinate system/
Graphics Button/Run
Graphics Button/Step...
2009-05-25 18:15:27 UTC in Enhanced Machine Controller
-
Repeatedly depressing "tab" causes a black outline box to move from widget to widget indicating which widget will be activated by pressing "Space". This behavior is normal and is used for gui operation without a mouse. The problem is that pressing "Ctrl-Space" to clear error messages simultaneously causes the tab highlighted widget to be selected. Often the results are benign, but could be...
2009-05-25 02:19:44 UTC in Enhanced Machine Controller
-
mshaver committed patchset 1017 of module emc2 to the Enhanced Machine Controller CVS repository, changing 1 files.
2005-07-04 05:35:43 UTC in Enhanced Machine Controller
-
mshaver committed patchset 890 of module emc2 to the Enhanced Machine Controller CVS repository, changing 1 files.
2005-06-14 06:08:36 UTC in Enhanced Machine Controller
-
mshaver committed patchset 889 of module emc2 to the Enhanced Machine Controller CVS repository, changing 2 files.
2005-06-14 05:19:12 UTC in Enhanced Machine Controller
-
mshaver committed patchset 868 of module emc2 to the Enhanced Machine Controller CVS repository, changing 14 files.
2005-06-14 05:16:58 UTC in Enhanced Machine Controller
-
mshaver committed patchset 866 of module emc2 to the Enhanced Machine Controller CVS repository, changing 3 files.
2005-06-14 05:12:33 UTC in Enhanced Machine Controller
-
mshaver committed patchset 611 of module emc to the Enhanced Machine Controller CVS repository, changing 1 files.
2004-05-26 22:20:07 UTC in Enhanced Machine Controller