-
The Tarifa firmware has an option to enable klog and syslog.
see: http://192.168.1.1/Management.asp to enable.
If the klogd and syslogd program run, ALL logged data will be send to a pc, on this pc a log client has to be installed to view syslog and klog.
To enable iptables to log goto: http://192.168.1.1/Log.asp and enable.
Greetings,
jchuit.
2008-06-16 17:53:11 UTC in Tarifa
-
The syslogd(klogd) used is the one out of busybox:
#
# System Logging Utilities
#
CONFIG_SYSLOGD=y
CONFIG_FEATURE_ROTATE_LOGFILE=y
CONFIG_FEATURE_REMOTE_LOG=y
CONFIG_FEATURE_IPC_SYSLOG=y
CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
CONFIG_LOGREAD=y
# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
CONFIG_KLOGD=y
CONFIG_LOGGER=y
The busybox version is very limited and does not...
2008-01-07 13:58:10 UTC in Tarifa
-
After a stability problem you must load the factory defaults by use of the
reset button (or shortcutting pin 15 and 16 from the EPROM), keep it 30 seconds pressed during boot.
Set the clockfreq from 200 to 216 Mhz:
Go to telnet and type,
nvram set clkfrq=216
nvram commit
reboot.
2007-10-16 20:20:39 UTC in Tarifa
-
Some overclocking is possible, but stable is a big question?
DD-wrt comes with an altered Linux-broadcom kernel, Tarifa uses the original.
If you use a wrt54g v2 to v3.1 or a wrt54gs v1 to 2.1 the clockfrequency is set to 216 Mhz after startup, the default CFE value of 200 Mhz isn't stable.
After a stability problem you must load the factory defaults by use of the reset button, keep is 30...
2007-10-16 19:41:13 UTC in Tarifa
-
Logged In: YES
user_id=1482280
The Parental_Control is implemented in the Tarifa firmware.
I didn't test it and it seems a link is missing in the Webpage of the router.
Goto http://192.168.1.1/Parental_Control.asp and sign-up.
Jchuit.
2006-11-01 18:33:42 UTC in Tarifa
-
jchuit registered the Tarifa project.
2006-03-22 17:32:09 UTC in Tarifa
