-
Still fails.
After lights have been selected, the right side of the window is filled with objects/buttons. The left pane contains the browser information. The size of the left and right pane are fixed now; the "bar" between the panes cannot be shifted left/right anymore.
2008-10-03 08:27:46 UTC in HomeRun
-
Cannot reproduce this problem anymore. Case can be closed.
2008-10-03 08:16:36 UTC in HomeRun
-
I still expierience a slow scroll.
To test:
Open the installed packages list in SETUP/CONFIG. Using the SLIDER BAR scrolling is fast. But using the ARROWS (up/down), scrolling is very slow.
If I open a large list of objects in the object edittor, the slider bar as well as the slider arrows work as expected.
2008-10-03 07:52:40 UTC in HomeRun
-
After entering a new task (for an action), the same (wrong) task screen is shown when double clicking another type of object.
Example:
enter a speak task for Nabaztag.
double click on an X10 lamp object
the speak task screen pops up again.
2008-10-01 08:58:38 UTC in HomeRun
-
- Earier I found actions/tasks executed twice.
- I detected his behaviour again, and found that this only occurs with actions/tasks triggered by means of a plan (if started by the "PERFORM" button the action is only executed once)
- I stopped the triggering plan and found that the action still was triggered, but only once.
- I stopped the triggering plan a second time; now the action is no...
2008-07-08 09:36:42 UTC in HomeRun
-
After opening the X10 toolbox monitor and starting to listen, the clear button is disabled. It is only enabled after stopping and starting to listen again.
2008-04-09 17:22:52 UTC in HomeRun
-
The option to enter an adjustment value in the solar configuration screen is not functional.
2008-03-14 09:51:56 UTC in HomeRun
-
Changing a condition for executing an action is only possible for the value of the condition, not for the type of the condition.
If the condition is: "less than 20 degrees" is is possible to change to "less than 21 degrees" but not to change to "at most 20 degrees".
2008-02-13 09:02:21 UTC in HomeRun
-
It would be nice to be able to start a plan a (fixed) time before a certain event takes place. This of cause is only possible if the event time is known by the system, which is the case with e.g. sun set/rise.
2008-02-13 08:35:17 UTC in HomeRun
-
If a binding is entered as "hours/minutes before" the plan is triggered, the line is shown in the edittor with the -(minus) sign.
If this line is reopened for editting, the minus sign is also shown in the edit box. If this valus is saved again, the "before" in combination with the minus translates to a plus value!
Saving the plan does not update the editted line in the list box. It's...
2008-02-09 15:07:31 UTC in HomeRun
