-
When I use readmem or flashmem using WIGGLER Cable, it is very slow. Is there any way to make it faster.
Flash chip is E28F640J3A120
Processor is IXP425 266 MHZ
Thx.
2008-11-21 21:23:40 UTC in Universal JTAG library, server and tools
-
I want to know using urJtag, How to check if the RAM and the flash is in good condition.
1.some observation using flashmem
One time after flashing the
complete 8 MB flash,it failed on verify. But when I did
readmem and compared with the original image, it was
exactly same.
2. How to test the RAM on the board which is 32 MB.
This is IXP425 processor board.
Is there anyway to find the...
2008-02-11 19:12:58 UTC in Universal JTAG library, server and tools
-
Thanks again, you are a very helpfull guy. I appreciate your help. I have few questions:
1. About EA253 cable. Where does the pin TDO should be connected on the DB25(parallel port)? If you check the file
ea253.c. Does this cable use TRST signal?
#define TRST 4
#define TDO 4
Both are define as same number.
2. I want to understand the function detect_register_size in the file...
2008-01-31 15:30:00 UTC in Universal JTAG library, server and tools
-
I don't know where to add the printf statement. Could you please guide me where to add the printf statement or add for me so that I can rebuild the urjtag.
Thanks for taking the interest.
2008-01-22 14:40:03 UTC in Universal JTAG library, server and tools
-
I made this cable myself. But made it ina good way and tested by the multimeter. I don't have oscilloscpe.
Is there any way to test the cable and the connections. Is there any other way to test the signals between the PC and the device.
Thanks for the help.
2008-01-18 17:43:19 UTC in Universal JTAG library, server and tools
-
Hi,
I know it is included in the Doc subdirectory. But my suggestion it to also include seperately so that people can read it.
Anyway for my problem. Detect doesn't do anything.
Thx.
2008-01-18 14:14:45 UTC in Universal JTAG library, server and tools
-
I am sorry I didn't read the urjtag.txt file. I think this file should be with the bz2 file.
I then installed ioperm -i.
Now I don't get any error. But it doesn't do any thing either.
If you have time I was following the http://www.seattlewireless.net/LinksysWrv54g website for jtag. But this is not working for me.
You can close this case now.
Any way thx.
2008-01-18 02:39:53 UTC in Universal JTAG library, server and tools
-
Thx for the prompt response.
I installed ioperm and now the error is:
Initializing parallel port at 0x378
Error: Cable Initialization failed
Any more tips:
Thx.
2008-01-18 01:21:26 UTC in Universal JTAG library, server and tools
-
I was trying this on winxp using cygwin
jtag> cable EA253 parallel 0x378
jtag> Unknown port driver: parallel
Error: Cable connection failed!
Please help
thx.
2008-01-17 03:24:24 UTC in Universal JTAG library, server and tools
-
I was trying to compile on windows XP using Cygwin. It complains about libreadline.h, history.h. I tried to check these files, they are not available.
2008-01-14 14:33:35 UTC in The openwince project