Tracker: Patches
Hi,
In thread "JTAG Problems" at
http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2003-July/015996.h
tml
http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2003-July/016014.h
tml
, it was observed that JTAG Tools parallel cable
interfacing doesn't work properly with the TRITON
Starterkit board.
This is most likely because the parallel interface
contains another pin /S_SRESET, which resets the CPU.
Since the Arcom driver which is otherwise compatible
with this board didn't enable this pin to avoid the reset,
the board was kept in reset state and reading/flashing
didn't work.
Thus I wrote a TRITON specific version of the Arcom
cable driver which accounts for separate pins.
Marcel Telka
jtag
None
Public
Comment ( 1 )
|
Date: 2003-09-14 20:05 Logged In: YES |
Attached Files ( 2 )
| Filename | Description | Download |
|---|---|---|
| triton.c | TRITON parallel cable JTAG driver file | Download |
| jtag-cvs.cable.diff | TRITON parallel cable JTAG infrastructure patch | Download |
Changes ( 5 )
| Field | Old Value | Date | By |
|---|---|---|---|
| status_id | Open | 2003-09-14 20:05 | telka |
| resolution_id | None | 2003-09-14 20:05 | telka |
| close_date | - | 2003-09-14 20:05 | telka |
| File Added | 61358: jtag-cvs.cable.diff | 2003-09-12 14:17 | andim2 |
| File Added | 61357: triton.c | 2003-09-12 14:16 | andim2 |
About SourceForge
Develop Software
Community
Copyright © 2009 Geeknet, Inc. All rights reserved. Terms of Use
