igmpproxy

Have a Gentoo linux router with config:

quickleave
phyint eth2 upstream ratelimit 0 threshold 1
altnet 10.0.0.0/8
altnet 102.168.1.1/24

phyint eth3 downstream ratelimit 0 threshold 1
phyint eth2 downstream ratelimit 0 threshold 1

phyint eth1 disabled
phyint ppp0 disabled
phyint wlan0 disabled
phyint wmaster0 disabled
phyint lo disabled

Interface list:
$ ip addr sh
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
2: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP qlen 1000
link/ether 00:02:b3:d2:0d:1b brd ff:ff:ff:ff:ff:ff
inet 10.21.18.92/23 brd 10.21.19.255 scope global eth2
3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DOWN qlen 1000
link/ether 00:14:85:8e:d3:08 brd ff:ff:ff:ff:ff:ff
4: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP qlen 1000
link/ether 00:04:23:c7:cd:58 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/24 brd 192.168.1.255 scope global eth3
5: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP qlen 100
link/ether 00:04:23:c7:cd:59 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.1/24 brd 192.168.0.255 scope global eth0
6: wmaster0: <UP,LOWER_UP> mtu 0 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ieee802.11 00:17:9a:c7:f6:97 brd 00:00:00:00:00:00
7: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DOWN qlen 1000
link/ether 00:17:9a:c7:f6:97 brd ff:ff:ff:ff:ff:ff
inet 192.168.11.1/24 brd 192.168.11.255 scope global wlan0
20: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1460 qdisc
pfifo_fast state UNKNOWN qlen 3
link/ppp
inet 94.27.99.132 peer 85.223.129.7/32 scope global ppp0

where eth2 - provider interface
eth0, eth3 - home network

When i'm running igmpproxy i have no video on clients.

$ip mroute show result is empty

Output of
$igmpproxy -dvvv /etc/igmpproxy.conf
is in attached file

Hope for your help