Tracker: Bugs
Hi,
I send this patch in a personal mail a month and a half ago, but it hasn't
been addressed, so I am reposting it in case it's useful for someone.
CLP-300 seems to be rather picky about the input data width, especially in
the 1200 dpi mode - it seems that both too narrow or too wide is bad.
Stripping the horizontal HWMargin also from the right side does the trick.
Without the patch, 1200 dpi prints are a complete garbage.
Aurélien Croc
None
None
Public
Comments ( 4 )
|
Date: 2008-12-08 02:22 This Tracker item was closed automatically by the system. It was |
|
Date: 2008-10-20 18:51 I only tested monochrome, but it looks ok. |
|
Date: 2008-10-19 20:54 There are still garbage present in the left margin.. |
|
Date: 2008-10-19 13:24 Thank you very much for this patch. I applied it and it is available in the |
Log in to comment.
Attached File ( 1 )
| Filename | Description | Download |
|---|---|---|
| compress.cpp.diff | Download |
Changes ( 13 )
| Field | Old Value | Date | By |
|---|---|---|---|
| status_id | Pending | 2008-12-08 02:22 | sf-robot |
| close_date | 2008-11-23 17:23 | 2008-12-08 02:22 | sf-robot |
| status_id | Open | 2008-11-23 17:23 | ap2c |
| close_date | - | 2008-11-23 17:23 | ap2c |
| priority | 5 | 2008-10-19 20:54 | ap2c |
| assigned_to | nobody | 2008-10-19 20:54 | ap2c |
| status_id | Pending | 2008-10-19 20:54 | ap2c |
| resolution_id | Fixed | 2008-10-19 20:54 | ap2c |
| close_date | 2008-10-19 13:24 | 2008-10-19 20:54 | ap2c |
| close_date | - | 2008-10-19 13:24 | ap2c |
| resolution_id | None | 2008-10-19 13:24 | ap2c |
| status_id | Open | 2008-10-19 13:24 | ap2c |
| File Added | 292193: compress.cpp.diff | 2008-09-05 06:02 | makovick |
About SourceForge
Develop Software
Community
Copyright © 2009 Geeknet, Inc. All rights reserved. Terms of Use
