-
Grammar before Engineering, everyone.
2005-08-22 19:22:19 UTC by nobody
-
welcome to 2005. anyone still doing anything with this?.
2005-05-14 04:12:58 UTC by angui
-
When I tried to configure I get this error:
loading cache ./config.cache
checking for rmmod... /sbin/rmmod
checking for lsmod... /bin/lsmod
checking for depmod... /sbin/depmod
checking for gawk... gawk
checking for a BSD compatible install... /usr/bin/install -c
checking for driver version... version is 0.2.0
checking for kernel source directory... yes ()
checking for complete kernel...
2005-04-19 15:41:05 UTC by woody_boy
-
Has anyone had a chance to port this driver to work on a linux-2.6.x kernel? I can't upgrade my Linux machine with linux-2.6.x kernel mainly because there is no VoIPBlaster driver that compiles under linux-2.6.x kernel.
2004-03-09 19:43:34 UTC by habibie
-
Hey guys,
Thanks for the tips just replace all "urb_t" with
"struct urb" but When i try to compile
voipblaster-0.2.0 with kernel 2.4.21 the follow error:
# make
cc -D__KERNEL__ -DMODULE -Wall -I/lib/modules/2.4.21-31301U90_4cl/build/include -O2 -DMODVERSIONS -include /lib/modules/2.4.21-31301U90_4cl/build/include/linux/modversions.h -c -o voip-proc.o voip-proc.c...
2003-12-01 16:35:36 UTC by roberto-agr
-
Hi everyone!
I also intend to use voipblaster with Asterisk and don´t know how to make things work. My main project is to use Asterisk as a VoIP PABX and many voipblaster atached to linux boxes connected to Internet, spread around the country, on small communities, allowing people to talk each other for free. I know how to install and setup Asterisk, so I need help on how to setup voipblaster...
2003-11-16 14:23:48 UTC by mastavares
-
Hello !
I have successfully compiled and installed the 0.2.0 drivers, now is there any help on how to use them within Asterisk ? I have not been able to find and hint around ...
thak you for any help ... cheers Fulvio.
2003-10-26 23:51:53 UTC by fulvy70
-
Hey guys
Hmmm... that was easier of what i thought, thanks for the tip! i didnt realize it until i just changed the urb stuff.
Thanks! it is working!
-=Raul=-.
2003-08-17 10:48:06 UTC by rauleli
-
Does not detect phone off hook
it get inialize without any problem. but only I can here dial tone from the attached
handset. when I offhook the set the ohphone cannot
identify it as it does with quicknet cards.
I cant any number dial too. so pls can you help.
2003-05-31 00:29:59 UTC by jorgeci
-
Thanks for the tips just replace all "urb_t" with "struct urb"
=)
2003-05-03 04:05:05 UTC by jorgeci
