2009-04-21 18:26:20 UTC
I got better driver results with fc10.i686 and xawtv:
stk11xx: Frame buffer overflow 8 307202 307200!
stk11xx: Frame buffer overflow 2518 307202 307200!
stk11xx: Frame buffer overflow 8 307202 307200!
stk11xx: Frame buffer overflow 1494 307202 307200!
stk11xx: Frame buffer overflow 8 307202 307200!
[root@localhost stk11xx-1.4.0]# xawtv -nodga -device /dev/video0
This is xawtv-3.95, running on Linux/i686 (2.6.27.21-170.2.56.fc10.i686)
xinerama 0: 1024x768+0+0
WARNING: No DGA direct video mode for this display.
/dev/video0 [v4l2]: no overlay support
v4l-conf had some trouble, trying to continue anyway
ioctl: VIDIOC_S_CTRL(id=9963778;value=32767): Erro desconhecido 515
ioctl: VIDIOC_S_CTRL(id=9963776;value=32767): Erro desconhecido 515
ioctl: VIDIOC_S_CTRL(id=9963779;value=65535): Erro desconhecido 515
ioctl: VIDIOC_S_CTRL(id=9963777;value=32767): Erro desconhecido 515
Lookslike v4l2-ioctl has important role in driver compilation.
I can not post an image here but xawtv was set as input 2 while stk-1160 were plugged in input 1. I could see 3 similar images in vertical distortion likes this: ( ||| ).
I don't have images for mplayer or tvtime, both programs only close if stk were unpluged. Tvtime recognizes stk as /dev/video0 input 1 PAL with a black screen
My dmesg:
usb 1-6: new high speed USB device using ehci_hcd and address 9
usb 1-6: configuration #1 chosen from 1 choice
stk11xx: Probe function called with VendorID=05E1, ProductID=0408 and InterfaceNumber=0
stk11xx: Syntek USB2.0 - STK-1160 based device found.
stk11xx: Syntek AVStream USB2.0 Video Capture - Product ID 0x0408.
stk11xx: Release: 0005
stk11xx: Number of interfaces : 3
stk11xx: Initialize USB2.0 Syntek Capture device
stk11xx: SET FEATURE
stk11xx: Syntek USB2.0 Capture device is ready
stk11xx: Syntek USB2.0 Camera is now controlling video device /dev/video0
usb 1-6: New USB device found, idVendor=05e1, idProduct=0408
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-6: Product: USB 2.0 Video Capture Controller
usb 1-6: Manufacturer: Syntek Semiconductor
my hardware: canon powershot a75 pal-m + stk-1160
