Read Me(SRecord) Read Me(SRecord)
NAME
SRecord - manipulate EPROM load files
DESCRIPTION
The SRecord package is a collection of powerful tools for manipulating
EPROM load files.
I wrote SRecord because when I was looking for programs to manipulate
EPROM load files, I could not find very many. The ones that I could
find only did a few of the things I needed. SRecord is written in C++
and polymorphism is used to provide the file format flexibility and
arbitrary filter chaining. Adding more file formats and filters is
relatively simple.
The File Formats
The SRecord package understands a number of file formats:
Ascii-Hex
The ascii-hex format is understood for both reading and
writing. (Also known as the ascii-space-hex format.)
ASM It is possible, for output only, to produce a serices of DB
statements containing the data. This can be useful for
embedding data into assembler programs. This format cannot be
read.
Atmel Generic
This format is produced by the Atmel AVR assembler. It is
understood for both reading and writing.
BASIC It is possible, for output only, to produce a serices of DATA
statements containing the data. This can be useful for
embedding data into BASIC programs. This format cannot be
read.
Binary Binary files can both be read and written.
B-Record
Files in Freescale Dragonball bootstrap b-record format can be
read and written.
C It is also possible to write a C array declaration which
contains the data. This can be useful when you want to embed
download data into C programs. This format cannot be read.
Cosmac The RCA Cosmac Elf format is understood for both reading and
writing.
DEC Binary
The DEC Binary (XXDP) format is understood for both reading and
writing.
Elektor Monitor (EMON52)
The EMON52 format is understood for both reading and writing.
Fairchild Fairbug
The Fairchild Fairbug format is understood for both reading and
writing.
hexdump It is possible to get a simple hexdump as output.
LSI Logic Fast Load
The LSI Logic Fast Load format is understood for both reading
and writing.
Formatted Binary
The Formatted Binary format is understood for both reading and
writing.
Four Packed Code (FPC)
The FPC format is understood for both reading and writing.
Intel The Intel hexadecimal format is understood for both reading and
writing. (Also known as the Intel MCS-86 Object format.)
Intel AOMF
The Intel Absolute Object Module Format (AOMF) is understood
for both reading and writing.
Intel 16
The Intel hexadecimal 16 format is understood for both reading
and writing. (Also known as the INHX16 file format.)
MIF The Memory Initialization File format by Altera is supported
for both reading and writing.
MOS Technology
The MOS Technology hexadecimal format is understood for both
reading and writing.
Motorola S-Record
The Motorola hexadecimal S-Record format is understood for both
reading and writing. (Also known as the Exorciser, Exormacs or
Exormax format.)
MsBin The Windows CE Binary Image Data Format is supported both for
reading and writing.
The Needham Electronics ASCII file format is understood for noth
reading
and writing.
OS65V The Ohio Scientific hexadecimal format is understood for both
reading and writing.
Signetics
The Signetics format is understood for both reading and
writing.
SPASM The SPASM format is used by a variety of PIC programmers; it is
understood for both reading and writing.
Spectrum
The Spectrum format is understood for both reading and writing.
Tektronix (Extended)
The Tektronix hexadecimal format and the Tektronix Extended
hexadecimal format are both understood for both reading and
writing.
Texas Instruments Tagged
The Texas Instruments Tagged format is understood for both
reading and writing (both 8 and 16 bit). Also known as the TI-
tagged or TI-SDSMAC format.
Texas Instruments ti-txt
The TI-TXT format is understood for reading and writing. This
format is used with the bootstrap loader of the Texas
Instruments MSP430 family of processors.
VHDL It is possible to write VHDL file. This is only supported for
output.
Verilog VMEM
It is possible to write a Verilog VMEM file suitable for
loading with $readmemh(). This format is supported for reading
and writing.
Wilson The Wilson format is understood for both reading and writing.
This mystery format was added for a mysterious type of EPROM
writer.
The Tools
The primary tools of the package are srec_cat and srec_cmp. All of the
tools understand all of the file formats, and all of the filters.
srec_cat
The srec_cat program may be used to catenate (join) EPROM load
files, or portions of EPROM load files, together. Because it
understands all of the input and output formats, it can also be
used to convert files from one format to another.
srec_cmp
The srec_cmp program may be use to compare EPROM load files, or
portions of EPROM load files, for equality.
srec_info
The srec_info program may be used to print summary information
about EPROM load files.
The Filters
The SRecord package is made more powerful by the concept of input
filters. Wherever an input file may be specified, filters may also be
applied to that input file. The following filters are available:
checksum
The checksum filter may be used to insert the checksum of the
data (bitnot, negative or positive) into the data.
bit reverse
The bit-reverse filter may be used to reverse the order of bits
in each data byte.
byte swap
The byte swap filter may be used to swap pairs of add and even
bytes.
CRC The crc filters may be used to insert a CRC into the data.
checksum
The checksum filters may be used to insert a checksum into the
data. Positive, negative and bit-not checksums are available,
as well as big-endian and little-endian byte orders.
crop The crop filter may be used to isolate an input address range,
or ranges, and discard the rest.
exclude The exclude filter may be used to exclude an input address
range, or ranges, and keep the rest.
fill The fill filter may be used to fill any holes in the data with
a nominated value.
unfill The unfill filter may be used to make holes in the data at
bytes with a nominated value.
random fill
The random fill filter may be used to fill holes in the data
with random byte values.
length The length filter may be used to insert the data length into
the data.
maximum The maximum filter may be used to insert the maximum data
address into the data.
minimum The minimum filter may be used to insert the minimum data
address into the data.
offset The offset filter may be used to offset the address of data
records, both forwards and backwards.
split The split filter may be used to split EPROM images for wide
data buses or other memory striping schemes.
unsplit The unsplit filter may be reverse the effects of the split
filter.
More than one filter may be applied to each input file. Different
filters may be applied to each input file. All filters may be applied
to all file formats.
ARCHIVE SITE
The latest version of SRecord is available on the Web from:
URL: http://srecord.sourceforge.net/
File: index.html # the SRecord page
File: srecord-1.56.README # Description, from the tar file
File: srecord-1.56.lsm # Description, LSM format
File: srecord-1.56.spec # RedHat package specification
File: srecord-1.56.tar.gz # the complete source
File: srecord-1.56.pdf # Reference Manual
BUILDING SRECORD
Full instructions for building SRecord may be found in the BUILDING
file included in this distribution.
It is also possible to build SRecord on Windows using the Cygwin
(www.cygwin.com) or DJGPP (www.delorie.com/djgpp) environments.
Instructions are in the BUILDING file, including how to get native
Windows binaries.
COPYRIGHT
srecord version 1.56
Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
2007, 2008, 2009, 2010 Peter Miller
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 3 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program. If not, see <http://www.gnu.org/licenses/>.
It should be in the LICENSE file included with this distribution.
AUTHOR
Peter Miller E-Mail: pmiller@opensource.org.au
/\/\* WWW: http://miller.emu.id.au/pmiller/
RELEASE NOTES
This section details the various features and bug fixes of the various
releases. For excruciating and complete detail, and also credits for
those of you who have generously sent me suggestions and bug reports,
see the etc/CHANGES.* files.
Version 1.56 (2010-Sep-15)
* A bug has been fixed in the MsBin output, it now concatenates records
correctly, and calaulate checksums appropriately.
* It is now possible to ask the Fletcher 16 filter to give you a
specific answer, and adjusting the checksum to achieve that result.
It is also possible to specify different seed values for the sums.
* There is a new srec_cat -enable=optional-address option to cause
output formats capable of omitting addresses, to omit a leading zero
address, as those formats usually default the address to zero, if no
address information is seen before the first data record. Defaults
to false (disabled).
* There is a new srec_cat -output-block-packing option, that may be
used to pack output records even when they cross internal SRecord
boundaries.
* There is a new srec_cat -output-block-size so that you can specify
the block size exactly, rather than implying it with the line length
option.
Version 1.55 (2010-Feb-10)
* The Makefile.in has been improved, it now copes with non-standard
--prefix options.
* The rpm.spec file has been improved, it now separates the commands,
shared libraries and development files.
Version 1.54 (2010-Jan-29)
* There is now a shared library installed, including the necessary
header files so that you can use all of the file formats and filters
in your own projects.
* The license on the shared library code is GNU Lesser General Public
License, version 3.0 or later.
* The code can cope with older versions of GNU Libgcrypt. In the case
of very old versions, by ignoring it.
* A number of build problems have been fixed.
Version 1.53 (2009-Nov-10)
* There is a new MsBin (Windows CE Binary Image Data) file format,
supported for both reading and writing.
* The lintian(1) warning about hyphen in the manual pages has been
silenced, by careful use of -, - and - as appropriate. Sure makes
some of the sources ugly, tho. The lintian(1) warning about the
undefined .XX macro has been silenced, by making it conditional.
* The code will build without libgcrypt.
Version 1.52 (2009-Sep-17)
* There is a new srec_cat -generator -l-e-constant data generator (and
also -b-e-const) that may be used to insert multi-byte constants into
your data. See srec_input(1) for more information.
Version 1.51 (2009-Sep-13)
* A number of gcc 4.4 build problems have been fixed.
* A bugs has been fixed in the Intel output format. When using the
segemented format (address-length=2) records that span the end of
segment boundary are tricky. The code now carefully splits such
output records, to ensure the two parts are explicitly placed into
separate segments.
Version 1.50 (2009-Jul-09)
* The CRC16 code has been enhanced to provide low-to-high bit order, in
addition to the previous high-to-low bit order. It is also possible
to specify the polynomial, with the default the CCITT standard
polynomial, as was in the previous code. See srec_input(1) for more
information.
* The MD5, RipeMD-160, SHA1, SHA224, SHA256, SHA384, SHA 512 and
Whirlpool message digests are now supported. See srec_input(1) for
more information.
* There is a new srec_cat -bit-reverse filter, that may be used to
reverse the bits in each data byte. See srec_input(1) for more
information.
Version 1.49 (2009-May-17)
* A typo in the srec_input(1) man page has been fixed.
Version 1.48 (2009-Apr-19)
* There are new Fletcher Checksum filters, both 32-bits and 16-bits,
both little-endian and big-endian.
* There are new Adler Checksum filters, both 32-bits and 16-bits, both
little-endian and big-endian.
Version 1.47 (2009-Feb-19)
* Memory Initialzation File (MIF) format by Altera is now supported for
reading and writing.
Version 1.46 (2009-Jan-13)
* There is a new option for the --x-e-length filters, they can now
accept a width, and this is divided into the byte lenght, so that you
can insert the length in units of words (2) or longs (4).
* Some small corrections have been made to the documentation.
* The -minimum and -maximum options have been renamed -minimum-address
and -maximum-address, to avoid a command line grammar syntax problem.
Version 1.45 (2008-Sep-30)
* A bug has been fixed in the srec_cat(1) command. You are now able to
specify several inputs within parentheses, instead of just one. This
allows filters to be applied to the concatenation of several inputs.
* The srec_cat(1) command is now able to write FORTH output.
Version 1.44 (2008-Aug-29)
* Some compilers issue a warning when const appears before extern.
"warning: storage class is not first". The C output has been updated
to conform to this expectation.
* The manual page for srec_cat(1) has been enhanced to describe the in-
memory data model, and the resulting output data order.
* The -motorola optional width argument now produces a better error
message when it is out of range.
* The -fill filter now checks the size, and fails for absurdly large
fills, with a -big override if they really want >1GB fills.
* A bug in the .spec file for rpmbuild has been fixed, it now takes
notice of $RPM_BUILD_ROOT
* There is a new -line-termination option, which may be used to select
the desired line termination of output text files.
Version 1.43 (2008-Jul-06)
* The srec-cat -data-only option has been broken down into four
separate controls. It is now possible to -enable and -disable
individual features, such as "header", "data-count", "execution-
start-address" and "footer". See srec_cat(1) for more information.
* The srec_cat -start-address option has been renamed -execution-start-
address to remove any confusion with the -offset filter. The
documentation now explicitly explains the difference between the two.
* Examples of converting to and from binary files have been added to
the srec_examples(1) man page.
* A bug has been fixed in the MOS Tech format, it now emits an end
record even when there is no execution start address passed in.
Version 1.42 (2008-Jun-01)
* The MOS Technology format was not reading and writing end records
correctly, this has been fixed. The name of the company has been
corrected.
* Some examples of how to insert constant or scripted data into your
EPROM load files have been added to the srec_examples(1) man page.
Version 1.41 (2008-May-12)
* False negative being reported by tests on Cygwin have been fixed.
* There are six new filters (-be-exclusive-length, -le-exclusive-
length, -be-exclusive-maximum, -le-exclusive-maximum, -be-exclusive-
minimum and -le-exclusive-minimum) which are very similar to their
non-exclusive equivalents, except that they do not include the adress
range covered by their output in their output.
* A bug has been fixed in the C word-array output. It was getting
offsets and lengths wrong in some cases.
* A bug has been fixed in the generated C array header file, it no
longer omits the section descriptor arrays.
* A problem with building RPM packages with the names of the
executables in the .spec file has been fixed, and the BuildRequires
has been updated.
Version 1.40 (2008-Mar-13)
* An RPM build problem has been fixed.
* The dependency on the Boost library is now documented in the BUILDING
file.
* Some build problems with g++ 4.3 have been fixed
* A bug has been fixed in the calculation of ranges on the command
line, it no longer goes into an infinite loop for "-fill 0xFF -over {
foo.hex -exclude -within foo.hex }" construct, which should have been
calculating an empty fill set, but was instead calculating a 4GB fill
set.
* The CRC32 filters now take an -xmodem option, to use an xmodem-like
(all bit zero) initial state, rather than the default CCITT (all bits
on) initial state.
Version 1.39 (2008-Feb-04)
* A bug has been fixed in the use of parentheses to group filters and
override the default precedences.
Version 1.38 (2008-Jan-14)
* The CRC16 filters now support a -Broken option, to perform a common-
but-broken CRC16 calculation, in addition to the CCITT and XMODEM
calculations.
* A link has been added to the CRC16 man page section to the
www.joegeluso.com/software/articles/ccitt.htm web page, to explain
the difficulties in seeding CRC16 calculations.
* A buglet has been fixed in the srec_motorola(5) man page, it now
includes S6 in the list of things that can appear in the type field.
* The ability to negate expressions is now mentioned in the
srec_examples(1) man page.
Version 1.37 (2007-Oct-29)
* It is now possible to have negative expressions on the command line,
to facilitate "--offset - -minimum foo" usages.
* The srec_cat(1) command now has a simple hexadecimal dump output
format.
* The use of uudecode(1) in the tests has been removed, so sharutils is
no longer a build dependency.
Version 1.36 (2007-Aug-07)
* A bug has been fixed in the CRC-16 CCITT calculation; the algorithm
was correct but the start value was incorrect, leading to incorrect
results.
* The CRC16 filters have a new --no-augment option, to omit the 16 zero
bits augmenting the message. This is not CCITT standard conforming,
but some implementations do this.
* A problem has been fixed in the generated Makefile.in file found in
the tarball.
* The license has been changed to GNU GPL version 3.
Version 1.35 (2007-Jun-23)
* A major build problem with the generated makefile has been fixed.
Version 1.34 (2007-Jun-22)
* The C and ASM output formats have been improved in the word mode.
* Several build problems have been fixed.
Version 1.33 (2007-May-18)
* More examples have been added to the documentation.
* It is now possible to perform set intersection and set difference on
address ranges on the command line.
* There is a new category of data source: generators. You can generate
constant data, random data and repeating data.
* The assembler and C-Array outputs now support additional options to
facilitate MSP430 systems. They can also optionally write shorts
rather than bytes.
* You can now round address ranges on the command line to be whole
multiples of a number of bytes.
Version 1.32 (2007-Apr-24)
* The TI-TXT format output has been improved; it is less spec
conforming but more reality conforming. It now allows odd alignment
without padding. It also ends with a q instead of a Q.
* The warning for odd input addresses has been dropped. The spec
didn't like them, but the MSP430 handles them without a hiccup.
Version 1.31 (2007-Apr-03)
* The Verilog format now suppresses comments when you specify the
--data-only option.
* The Texas Instruments ti-txt (MSP430) format is now understood for
reading and writing.
Version 1.30 (2007-Mar-21)
* The ascii-hex output format has been improved.
* The ti-tagged 16-bit format is now understood for reading and
writing.
* The Intel format no longer warns about missing optional records.
* A bug in the ti-tagged format has been fixed, it now understands the
'0' tag.
Version 1.29 (2007-Mar-13)
* A serious bug has been fixed in the generated Makefile.
Version 1.28 (2007-Mar-08)
* It is now possible to read and write files in the Freescale MC68EZ328
Dragonball bootstrap b-record format
Version 1.27 (2006-Dec-21)
* [SourceForge Feature Request 1597637] There is a new warning issued
when input data records are not in strictly ascending address order.
There is a new command line option to silence the warning.
* [SourceForge Feature Request 1592348] The command line processing of
all srecord commands now understands @file command line options,
filled with additional space separated strings witch will be treated
as of they were command line options. This gets around absurdly
short command line length limits in some operating systems.
Version 1.26 (2006-May-26)
* It is now possible to place parentheses on the command line in more
places to clarify your intent.
* This change prepares SRecord for the next public release.
Version 1.25 (2006-May-18)
* The assembler output has been enhanced to produce ORG directives, if
necessary, to change the data address.
* The srec_cat(1) command now only writes an execution start address
into the output if there was an execution start address present in
the input.
Version 1.24 (2006-Mar-08)
* Additional information has been added to the lseek error when they
try to seek to addresses >= 2**31
* The CRC 16 filters have been enhanced to accept an argument to
specify whether CCITT or XMODEM calculations are to be performed.
Version 1.23 (2005-Sep-23)
* A segfault has been fixed on x86_64 when running the regression test
suite.
* A compile problem with the lib/srec/output/file/c.cc file has been
fixed.
Version 1.22 (2005-Aug-12)
* The -byte-swap filter now has an optional width argument, to specify
the address width to swap. The default is two bytes.
* The motorola file format now accepts an additional 'width' command
line argument, so you can have 16-bit and 32-bit address multiples.
* A bug has been fixed in the VMEM output format. It was failing to
correctly set the next address in some cases. This fixes SourceForge
bug 1119786.
* The -C-Array output format now uses the const keyword by default, you
can turn it off with the -no-const option. The -C-Array output
format can now generate an additional include file if you use the
-INClude option. This answers SourceForge feature request 942132.
* A fix for the "undefined symbols" problem when using g++ 3.x on
Cygwin and MacOsX has been added to the ./configure script.
* There is a new -ignore-checksum command line option. The -ignore-
checksums option may be used to disable checksum validation of input
files, for those formats which have checksums at all. Note that the
checksum values are still read in and parsed (so it is still an error
if they are missing) but their values are not checked.
Version 1.21 (2005-Feb-07)
* More Doxygen comments have been added to the class header files.
* There is a new srec_cat --crlf option, which may be used for force
CRLF output on operating systems which don't use that style of line
termination.
* A number of problems with GCC, particularly with the early 3.x
series.
* There is a new "Stewie" format, an undocumented format loosely based
on the Motorola S-Record format, apparently used in mobile phones.
More information would be most welcome.
* A number of build problems have been fixed.
Version 1.20 (2004-Feb-08)
* The AOMF format now accepts (and ignores) more record types.
Version 1.19 (2004-Jan-03)
* It is now possible to set the execution start address in the output
using the srec_cat -Execution_Start_Address command line option.
* The Intel Absolute Object Module Format (AOMF) is now supported for
reading and writing.
* There is a new srec_cat -Random_Fill filter, like the srec_cat -Fill
filter except that it uses random values.
Version 1.18 (2004-Jan-01)
* The VMEM format is now able to output data for 64 and 128 bits wide
memories.
* A bug in the SRecord reference manuals has been fixed; the CRCxx had
a copy-and-paste glitch and always said big-endian where little
endian was intended half the time.
Version 1.17 (2003-Oct-12)
* There is now support for Intel Extended Segment addressing output,
via the --address-length=2 option.
* There is now support for output of Verilog VMEM format. See
srec_vmem(5) for more information.
* There is now support for reading and writing the INHX16 format, used
in various PIC programmers. It looks just like the Intel Hex format,
except that the bytes counts and the addresses refer to words (hi,lo)
rather than bytes. See srec_intel16(5) for more information.
Version 1.16 (2003-Jul-28)
* Some updates have been made to cope with GCC 3.2
Version 1.15 (2003-Jun-16)
* The ASCII-Hex implementation is now slightly more complete. I still
haven't found a definitive description.
* The Fairchild Fairbug format has been added for reading and writing.
See srec_fairchild(5) for more information.
* The Spectrum format has been added for reading and writing. See
srec_spectrum(5) for more information.
* The Formatted Binary format has been added for reading and writing.
See srec_formatted_binary(5) for more information.
* The RCA Cosmac Elf format has been added for reading and writing.
See srec_cosmac(5) for more information.
* The Needham EMP programmer format has been added for reading and
writing. See srec_needham(5) for more information.
Version 1.14 (2003-Mar-11)
* Numerous fixes have been made to header handling. It is now possible
to specify an empty header with the -header command line option.
* Some more GCC 3.2 build problems have been fixed.
Version 1.13 (2003-Feb-05)
* Bugs have been fixed in the Texas Instruments Tagged and VHDL
formats, which produced inconsistent output.
* A couple of build problems have been fixed.
* There are two new output formats for ASM and BASIC.
Version 1.12 (2002-Dec-06)
* It is now possible to put -minimum input.spec (also -maximum and
-length) almost anywhere on the command line that you can put a
number. It allows, for example, the -offset value to be calculated
from the maximum of the previous file. The values calculated by
-Minimum, -Maximum and -Length may also be rounded to arbitrary
boundaries, using -Round_Down, -Round_Nearest and -Round_Up.
* The malformed Motorola S5 records output by the Green Hills tool
chain are now understood.
Version 1.11 (2002-Oct-21)
* The Ohio Scientific OS65V audio tape format has been added for
reading and writing. See srec_os65v(5) for more information.
* Some build problems have been fixed.
Version 1.10 (2002-Jun-14)
* The Intel format now emits the redundant extended linear address
record at the start of the file; some loaders couldn't cope without
it.
* The Binary format now copes with writing to pipes.
* The Motorola format now understands the S6 (24-bit data record count)
records for reading and writing.
* The DEC Binary format now works correctly on Windows machines.
* The LSI Logic Fast Load format is now understood for both reading and
writing. See srec_fastload(5) for more information.
Version 1.9 (2001-Nov-27)
* The DEC Binary (XXDP) format is now understood for both reading and
writing. See srec_dec_binary(5) for more information.
* The Elektor Monitor (EMON52) format is now understood for both
reading and writing. See srec_emon52(5) for more information.
* The Signetics format is now understood for both reading and writing.
See srec_signetics(5) for more information.
* The Four Packed Code (FPC) format is now understood for both reading
and writing. See srec_fpc(5) for more information.
* Wherever possible, header data is now passed through by srec_cat(1).
There is also a new srec_cat -header option, so that you can set the
header comment from the command line.
* The Atmel Generic format for Atmel AVR programmers is now understood
for both reading and writing. See srec_atmel_generic(5) for more
information.
* The handling of termination records has been improved. It caused
problems for a number of filters, including the -fill filter.
* A bug has been fixed in the checksum calculations for the Tektronix
format.
* There is a new SPASM format for PIC programmers. See srec_spasm(5)
for more information.
Version 1.8 (2001-Apr-20)
* There is a new "unfill" filter, which may be used to perform the
reverse effect of the "fill" filter.
* There is a new bit-wise NOT filter, which may be used to invert the
data.
* A couple of bugs have been fixed in the CRC filters.
Version 1.7 (2001-Mar-19)
* The documentation is now in PDF format. This was in order to make it
more accessible to a wider range of people.
* There is a new srec_cat --address-length option, so that you can set
the length of the address fields in the output file. For example, if
you always want S3 data records in a Motorola hex file, use the
--address-length=4 option. This helps when talking to brain-dead
EPROM programmers which do not fully implement the format
specification.
* There is a new --multiple option to the commands, which permits an
input file to contain multiple (contradictory) values for some memory
locations. The last value in the file will be used.
* A problem has been fixed which stopped SRecord from building under
Cygwin.
* A bug has been fixed in the C array output. It used to generate
invalid output when the input had holes in the data.
Version 1.6 (2000-Dec-03)
* A bug has been fixed in the C array output. (Holes in the input
caused an invalid C file to be produced.)
* There is are new CRC input filters, both 16-bit and 32-bit, both big
and little endian. See srec_cat(1) for more information.
* There is a new VHDL output format.
* There are new checksum filters: in addition to the existing one's
complement (bit not) checksum filter, there are now negative and
positive checksum filters. See srec_cat(1) for more information.
* The checksum filters are now able to sum over 16-bit and 32-bit
values, in addition to the existing byte sums.
* The srec_cmp program now has a --verbose option, which gives more
information about how the two inputs differ. See srec_cmp(1) for
more information.
Version 1.5 (2000-Mar-06)
* There is now a command line option to guess the input file format;
all of the tools understand this option.
* The "MOS Technologies" file format is now understood for reading and
writing. See srec_mos_tech(5) for more information.
* The "Tektronix Extended" file format is now understood for reading
and writing. See srec_tektronix_extended(5) for more information.
* The "Texas Instruments Tagged" file format is now understood for
reading and writing. (Also known as the TI-Tagged or SDSMAC format.)
See srec_ti_tagged(5) for more information.
* The "ascii-hex" file format is now understood for reading and
writing. (Also known as the ascii-space-hex format.) See
srec_ascii_hex(5) for more information.
* There is a new byte swap input filter, allowing pairs of odd and even
input bytes to be swapped. See srec_cat(1) for more information.
* The "wilson" file format is now understood for reading and writing.
This mystery format was added for a mysterious type of EPROM writer.
See srec_wilson(5) for more information.
* The srec_cat program now has a -data-only option, which suppresses
all output except for the data records. This helps when talking to
brain-dead EPROM programmers which barf at anything but data. See
srec_cat(1) for more information.
* There is a new -Line-Length option for the srec_cat program, allowing
you to specify the maximum width of output lines. See srec_cat(1)
for more information.
Version 1.4 (2000-Jan-13)
* SRecord can now cope with CRLF sequences in Unix files. This was
unfortunately common where the file was generated on a PC, but
SRecord was being used on Unix.
Version 1.3 (1999-May-12)
* A bug has been fixed which would cause the crop and exclude filters
to dump core sometimes.
* A bug has been fixed where binary files were handled incorrectly on
Windows NT (actually, any system in which text files aren't the same
as binary files).
* There are three new data filters. The --OR filter, which may be used
to bit-wise OR a value to each data byte; the --AND filter, which may
be used to bit-wise AND a value to each data byte; and the
--eXclusive-OR filter, which may be used to bit-wise XOR a value to
each data byte. See srec_cat(1) for more information.
Version 1.2 (1998-Nov-04)
* This release includes file format man pages. The web page also
includes a PostScript reference manual, containing all of the man
pages.
* The Intel hex format now has full 32-bit support. See srec_intel(5)
for more information.
* The Tektronix hex format is now supported (only the 16-bit version,
Extended Tektronix hex is not yet supported). See srec_tektronix(5)
for more information.
* There is a new split filter, useful for wide data buses and memory
striping, and a complementary unsplit filter to reverse it. See
srec_cat(1) for more information.
Version 1.1 (1998-Mar-22)
First public release.
Reference Manual SRecord Read Me(SRecord)
