SoundStepper is a 100% software telescope controller, for Windows, that uses audio hardware to control step motors in real time. All it requires is an external analog current amplifier to operate.
- SoundStepper can control up to 4 motors (RA, Dec, focuser and field rotator) of a equatorial or altazimuthal-mounted telescope.
- SoundStepper can control any type of equatorial-mounted telescopes with step motors. Manual-pointing mounts (ex: barndoor, poncet platforms, "polar axis", threaded-rod driven mounts), "meridian-flip" mounts (ex: GEM or cross-axis), and "no-meridian-flip" mounts (ex: Fork, yoke, horseshoe, split-ring), and beginning from 5.0 beta version, altazimuthal mounts too.
- SoundStepper can "sync" and "go-to" manual-pointing mounts, making faint objects easier to find (manually center scope on a star, find the star in Cartes du Ciel, right-button, "sync", right-button on faint object, "go-to").
- Using analog control, SoundStepper drive step motors with quietness, smoothness and linearity. With adjustable linearity, the typical wobbling is 1/20 of step. Like microstep controllers, it can put the motors in any position between step positions.
- No PICs, no small SMD microsoldering, no EPROM, no switching interference. SoundStepper uses a simple (SUGGESTED) analog current controller, plugged on cheap USB-AUDIO device, to drive a stepper.
- No MS-DOS dedicated computers. SoundStepper does realtime control sharing the computer with planetarium, photo/video capture and others applications, in Windows. It take advantage of the audio devices buffering and autonomous playing.
- SoundStepper has built-in PEC and NPEC (periodic and non-periodic error correction systems). With NPEC, the entire threaded rod can be "trained", enabling the use of cheap thread rods, and the "thread rod/nut/arm" system (like "Astrotrac").
- Main screen with keyboard arrows "control box" (four speeds: slew, find, center and guiding), go-to, flip, park/unpark, and focuser/rotator controls.
- LX200 command interface compatibility, enabling the use of LX200 ASCOM driver, through any virtual serial-TCP redirector. The TCP/IP interface enable control the scope from a remote computer.
- Configuration screen with many controls, to match SoundStepper with your motors and mount.
- Autosave and autorecover last telescope and motor positions (crash recover)
- Joystick interface (Beginning with 5.0 beta version)
There are no 2 star reviews.