Be the first to post a text review of PortableApps.com Extras. Rate and review a project by clicking thumbs up or thumbs down in the right column.

• JkDefrag v3.34 Portable Released

  JkDefrag v3.32 Portable I stumbled upon JkDefrag (Homepage: http://www.kessels.com/JkDefrag/). It is based off of the Windows defragger and in my professional opinion safe. I've tested it on Windows 2000/XP/Vista for the past 6 months and all works fine. What it does is defrag your files (like the Windows defragger but faster). Additionally, it moves all the data to the center of your hard disk for faster access. Think of the data as a pair of bicyclists going in a circle. Both of them are travelling at 5 mph. Which will go around the circle faster, the inside cyclist or the outside? Hopefully you said inside. Well data on a hard drive works the same way. It can be accessed faster on the inner cylinders. It also optimizes the hard disk, although I don't know how it does it (technically speaking). I ran this on computers that were so slow that the context menu (right click menu) on the desktop was delayed but after running this it was instant. So theres no doubt in my mind it works. As you can see I have nothing but good things to say about this software. Copy the JkDefragPortable folder into: \PortableApps\ of your geek.menu or PortableApps.com installation. This utility allows you to defrag your flash drive from your PortableApps menu! This is more efficient than the Windows Defrag Utility. More info at: http://www.kessels.com/JkDefrag/ Portable Version (February 4, 2008) Changes: - Added documentation to JkDefragPortable\Other\doc along with JkDefrag licenses JkDefrag v3.34 (February 1, 2008) Changes: - Re-fixed the "DisableDefaults" bug. - Partial undo of the change that uses the mountpoint of a volume. It was causing problems during the automatic scanning for disks to be defragmented. - Pushed the "Zone calculation" messages down to debug level 4. - Fixed the VisualC example project. JkDefrag v3.33 (December 23, 2007) Changes: - Fixed a bug in the Windows version that for some users caused the display of the diskmap to get stuck. - Fixed a bug in the forced-fill optimization that caused the program to skip fragments that were left by filling a gap with a part of the fragment. - If the volumename of a disk cannot be determined then the program will now fallback to using the mountpoint of a volume to open a handle. - If the user specifies a short input mask without a wildcard, for example "C:" or "C:\", then the input mask is rewritten as "C:\*". - Fixed a bug where the special "DisableDefaults" spacehogs mask only disabled the masks, but not the "Files bigger than 50 megabytes"" and "Files not accessed in the last month" criteria. - Bundled some language-specific SpaceHogs masks into "?:\\*\\Installshield Installation Information\\*". - Moved the "Volume ID" message for FAT disks from debug level zero to 6.

  posted by sag47 652 days ago

• JkDefrag Portable JkDefrag v3.34 Portable file released: JkDefragPortable_3.34_02042008.zip

  Portable Version (February 4, 2008) Changes: - Added documentation to JkDefragPortable\Other\doc along with JkDefrag licenses JkDefrag v3.34 (February 1, 2008) Changes: - Re-fixed the "DisableDefaults" bug. - Partial undo of the change that uses the mountpoint of a volume. It was causing problems during the automatic scanning for disks to be defragmented. - Pushed the "Zone calculation" messages down to debug level 4. - Fixed the VisualC example project. JkDefrag v3.33 (December 23, 2007) Changes: - Fixed a bug in the Windows version that for some users caused the display of the diskmap to get stuck. - Fixed a bug in the forced-fill optimization that caused the program to skip fragments that were left by filling a gap with a part of the fragment. - If the volumename of a disk cannot be determined then the program will now fallback to using the mountpoint of a volume to open a handle. - If the user specifies a short input mask without a wildcard, for example "C:" or "C:\", then the input mask is rewritten as "C:\*". - Fixed a bug where the special "DisableDefaults" spacehogs mask only disabled the masks, but not the "Files bigger than 50 megabytes"" and "Files not accessed in the last month" criteria. - Bundled some language-specific SpaceHogs masks into "?:\\*\\Installshield Installation Information\\*". - Moved the "Volume ID" message for FAT disks from debug level zero to 6.

  posted 652 days ago

• File released: /JkDefrag Portable/JkDefrag v3.34 Portable/JkDefragPortable_3.34_02042008.zip

  posted 652 days ago

• JkDefrag Portable JkDefrag v3.32 Portable file released: JkDefragPortable_3.32_12042007.zip

  JkDefrag v3.32 (December 3, 2007) Changes: - Fixed a bug in the FAT scanner that caused the program to crash on volume names shorter than 9 characters. - Simplified the rules that automatically change the mask that selects which disk/folders/files must be processed. It now simple prepends and appends an asterisk if there is no asterisk yet. - Some small changes in the graphics code. - Fixed a bug in the commandline version that showed zone numbers 0...2, instead of 1...3.

  posted 713 days ago

• File released: /JkDefrag Portable/JkDefrag v3.32 Portable/JkDefragPortable_3.32_12042007.zip

  posted 713 days ago

• VirtuaWin Portable VirtuaWin v3.2 Portable file released: VirtuaWinPortable.zip

  posted 730 days ago

• File released: /VirtuaWin Portable/VirtuaWin v3.2 Portable/VirtuaWinPortable.zip

  posted 730 days ago

• Battle for Wesnoth Portable Ed Battle for Wesnoth v1.2.7 Portable (fixed) file released: WesnothPortable.zip

  There was an upload problem with the original release of the portableapps version of Wesnoth. The zip file is ok now!

  posted 730 days ago

• File released: /Battle for Wesnoth Portable Ed/Battle for Wesnoth v1.2.7 Portable (fixed)/WesnothPortable.zip

  posted 730 days ago

• ZSNES Portable ZSNES v1.51 Portable file released: ZSNESPortable.zip

  posted 730 days ago