-
This is fixed, though there are still issues with the Aspire One's right slot not appearing in lspci and hence the driver not loading.
2009-05-07 01:58:12 UTC by fgodfrey
-
This was fixed by km9 quite awhile ago.
2009-05-07 01:56:20 UTC by fgodfrey
-
I'm not sure why, but the Wind Slipstream seems to have quite a few problems with drivers. I'd strongly suggest installing with the method described on the http://mydellmini.com forums. The problem you are experiencing is almost certainly an artifact of the Wind method.
In any event, I haven't been able to reproduce this problem at all.
2009-05-07 01:55:44 UTC by fgodfrey
-
Unfortunately, this driver was only written to support SD and SDHC cards. Memory stick support is not out of the question, but not something currently on the feature list. Sorry!
2009-05-07 01:53:36 UTC by fgodfrey
-
The right side reader on my Acer Aspire One supports Memory Sticks. This is pretty much all I use, I don't have many SD cards... so I'm very interested in making that reader work.
Thanks.
2009-04-26 03:35:07 UTC by nobody
-
I have the Dell Mini 9 and I installed kext for built in SD reader I found that the laptop does not power all the way off after selecting shutdown. It seems that it is about to shut off then a grey screen pops up and it says that the laptop needs to be restarted or reset. I am running Leopard 10.5.6 wind slipstream version 10.5.4 then updated via OS updater.
If you need any additional...
2009-02-16 06:07:31 UTC by nobody
-
km9 committed revision 20 to the Darwin SDHCI Driver for JMicron Devices SVN repository, changing 2 files.
2009-02-11 09:41:37 UTC by km9
-
km9 committed revision 19 to the Darwin SDHCI Driver for JMicron Devices SVN repository, changing 2 files.
2009-02-11 05:44:32 UTC by km9
-
km9 committed revision 18 to the Darwin SDHCI Driver for JMicron Devices SVN repository, changing 3 files.
2009-02-11 01:51:09 UTC by km9
-
fc1 verbose.
When i plug 1Gb SD card mouse can't move anymore and i get :
16/01/09 16:25:38 kernel SDHCI: BaseClock = 33MHz
16/01/09 16:25:38 kernel SDHCI: SD Clock = 257KHz
16/01/09 16:25:38 kernel powerSD: 0x1f021a1
16/01/09 16:25:39 kernel SDHCI: No Response from CMD8
16/01/09 16:25:39 kernel SDHCI: BaseClock = 33MHz
and with another version seems to be modified for Ricoh and the...
2009-01-21 09:25:12 UTC by wiwi4
