Open source utility to (re)program flash BIOS chips. Initial support will be for the i-opener network appliance under Qnx since there is an immediate need.
Be the first to post a text review of openflash. Rate and review a project by clicking thumbs up or thumbs down in the right column.
1. Modifications to correct failures to exit Device ID mode on V4 Iopeners using RISE CPU. This problem was reported as an erase failure in 1.01. 2. Changed the method used to exit Device mode from the one step method to the three step. 3. Added code to check that Device ID mode was exited successfully. If the first attempt fails an additional 9 attempts will be made before giving up. 4. Corrected a bug in WaitFlashComplete() which prevented timeout errors from being detected. 5. Doubled the loop count in WaitFlashComplete(). 6. Added the -V switch to enable verbose error and status messages. 7. Added -c switch to allow Device ID checks to be disabled.
Added support for FreeBSD 4.0. Added support for Atmel AT49F020 (not tested). Added -l switch to list supported devices.
Be the first person to add a text review.
Copyright © 2009 Geeknet, Inc. All rights reserved. Terms of Use
Thanks for your rating!
Would you also like to write a review?