Home / NAS4Free-9.2.0.1 / 9.2.0.1.972
Name Modified Size Downloads / Week Status
Parent folder
Totals: 9 Items   1.2 GB 198
NAS4Free-x64-LiveCD-9.2.0.1.972.iso 2014-04-28 238.4 MB 4949 weekly downloads
NAS4Free-x64-LiveUSB-9.2.0.1.972.img 2014-04-28 270.5 MB 2525 weekly downloads
NAS4Free-x64-embedded-9.2.0.1.972.img 2014-04-28 118.5 MB 2727 weekly downloads
NAS4Free-x64-9.2.0.1.972.checksum 2014-04-28 339 Bytes 33 weekly downloads
NAS4Free-x86-LiveCD-9.2.0.1.972.iso 2014-04-28 229.2 MB 3737 weekly downloads
NAS4Free-x86-LiveUSB-9.2.0.1.972.img 2014-04-28 261.1 MB 3030 weekly downloads
NAS4Free-x86-embedded-9.2.0.1.972.img 2014-04-28 114.5 MB 1313 weekly downloads
NAS4Free-x86-9.2.0.1.972.checksum 2014-04-28 339 Bytes 44 weekly downloads
readme.txt 2014-04-28 14.0 kB 1010 weekly downloads
**** README/CHANGELOG **** *** Please read always this README/CHANGELOG file ***** NAS4Free Upgrade from 9.1.0.1 to 9.2.0.1.XXX ============================================ Upgrade NAS4Free full or embeded from 9.1 to 9.2 from webgui or from LiveCD/USB is problematic, due a new size of boot partition. Please download/save NAS4Free config to safe place and backup files from second partition if you use boot disk as data Disk. Only try to upgrade if you know that your boot partition is 1G or more in size, otherwise a install from scratch is the recommended way, sorry for inconvenience. Don't forget create backup configuration of NAS4Free before upgrading! 1. System|Backup/Restore: Restore your config. 2. Disks|Management : click on "Clear config and Import disks" to update configuration.* 3. Disks|Management|Disk|Edit: After step 2, you will need to re-activate S.M.A.R.T. monitoring for every device. *Note : If you have RAID controllers but cannot parse S.M.A.R.T. info properly, please add correct variables in System | Advanced | loader.conf to load the correct kernel modules for controller support. Then reboot and "Clear config and Import disks" again to update configuration. 9.2.0.1.xxx ZFS v5000 Upgrade ============================= The ZFS version has been upgraded from pool version 28 to v5000 (Feature Flags). v5000 has new features added, the pools are marked with a property, feature@featurename so that only compatible versions of ZFS will import the pool. Some of these features include LZ4 compression and async destroy. The upgrade to ZFS v5000 has to be manually performed from cli or by the GUI. "zpool upgrade <poolname>" via the console or ssh, or in the GUI under Disks|ZFS|Pools|Tools. After you perform the ZFS upgrade, a downgrade to 9.1.0.1 series will not be possible, so ensure you are happy with the release BEFORE you upgrade the pool! HAST (Highly Available Storage) =============================== It is still experimental WebGUI. You need CLI in some tasks. To evaluate HAST, you need the two same configured NAS4Free. Currently iSCSI, CIFS, GPT/UFS and ZFS on HAST is supported. Special note for ZFS kernel parameter tuning ============================================ Now, the extension package is separated and released. If you have a question, please visit our forum. ZFS kernel tune (WebGUI extension) 20121031 http://forums.nas4free.org/viewtopic.php?f=71&t=1278 Extensions and ownCloud sample ============================== You can install some PHP based packages easily. If you are interested, please refer to following thread. [EXTENSION] VirtualBox + phpVirtualBox http://forums.nas4free.org/viewtopic.php?f=71&t=1609 Using ownCloud on NAS4Free + Active Directory Authentication http://forums.nas4free.org/viewtopic.php?f=48&t=1606 NAS4Free 9.2.0.1.xxx are current developing versions. And it should be used as base version for all future releases. BUILD 9.2.0.1.972 ================= Changes: - Upgrade to FreeBSD 9.2 RELEASE p4. - Improved WebGUI under PHP 5.5. - Add 'twa' (3ware 9000/9500/9550/9650 series SATA RAID controller) and 'twe' (3ware 5000/6000/7000/8000 series PATA/SATA RAID adapter) support. - Add areca SAS/SATA HBA ARC-1300/ARC-1320 series adapter driver. (arcsas.ko) - Add Broadcom BCM57764, BCM57767, BCM57782, BCM57786 and BCM57787 support. - Add loader.conf configuration option to gui. - Add zfs lz4 compression option to gui. - Add tmux (A terminal multiplexer). - Add tw_cli (Command Line Interface Storage Management Software for AMCC/3ware ATA RAID Controllers. - Add additional check to device's controller to detect scenario when a device is moved/shuffled to different controllers. - Add InfiniBand Adapter drivers. - Add oce Emulex 10Gbe Ethernet driver. - Add sfxge Solarflare 10Gb Ethernet driver. (x64 only) - Add qlxgb qlogic 10Gb driver. (x64 only) - Add vxge Exar/Neterion XFrame 3100 10GbE driver. - Highlight the entire row when device detected does not match with device in config.xml. - Provide more detailed information at Status column to help troubleshooting. - Remove zfs zfs_prefetch_disable=1 default variabele. (now it's an user option) - Backup and restore the loader.conf.local settings with livecd/usb upgrades and convert. - Backup and restore the loader.conf (/boot/loader.conf.local) settings on firmware upgrades. - Remove zfs zfs_prefetch_disable=1 default variabele. (now it's an user option). - amdtemp include support for AMD A10-5700 APU with Radeon(tm) HD Graphics. - Upgrade gzip to 1.6 with gzip-rsyncable patch. - Upgrade netatalk to 2.2.5. - Upgrade dmidecode to 2.12. - Upgrade e2fsprogs to 1.42.9. - Upgrade php to 5.5.11. - Upgrade samba to 3.6.23. - Upgrade tw_cli to 9.5.5. - Upgrade lighttpd to 1.4.35. - Upgrade zoneinfo to 2014b. - Upgrade bash to 4.3 patchlevel 11. - Upgrade nut to 2.7.2. New feature: - Add additional check to device's controller to detect scenario when a device is moved/shuffled to different controllers - Highlight the entire row when device detected does not match with device in config.xml - Provide more detailed information at Status column to help troubleshooting - Remove zfs zfs_prefetch_disable=1 default variabele. (now it's an user option) - Backup and restore the loader.conf.local settings with livecd/usb upgrades and convert. - Backup and restore the loader.conf (/boot/loader.conf.local) settings on firmware upgrades. Fixes: - Fix mDNSResponder start. - Use afpd server name instate of the server host name. - Fix Trap notifications on Disks|ZFS| datasets and volumes. - Fix Display all groups in Access|Users page instead of just primary group. New feature 9.1.0.1 =================== - HAST(Highly Available Storage) + iSCSI target service. (HA iSCSI target) - HAST + CIFS/SMB service. - HAST + GPT/UFS mount/umount. - HAST + ZFS import/export. - bridge and carp interface. - update PHP builtin modules for ownCloud, phpVirtualBox and more. - rewrite WebGUI with jQuery. - bundle all FreeBSD drivers. - control power mode and CPU frequency. - import single disk. (detect ZFS/UFS/NTFS only) - import SoftwareRAID disk. (except vinum) - import encrypted disk. - update mount points after importing disks. (GPT UFS/MBR UFS/GPT NTFS only) - modify ZFS pool mountpoint. - modify Access Restrictions on ZFS dataset. - support ZFS sync property. - support ZFS sparse volume. - support ZFS reservation property. (dataset only) - support VMXNET3 on VMware ESXi. - provide LiveUSB image. - reload iSCSI target. - upgrade from FreeNAS 0.7.x. - Set webgui native UTF-8. - Allow underscore (_) netbios name CIFS/SMB. - Improof status graphs. - Add loader.conf configuration option. Fixed since 9.0.0.1 =================== - Set default timezone. - Fix broken modifications. - Fix wrong mount check. - Remove extra space. - Fix istgt reload operation is failed. - Remount zfs dataset after modifying canmount. - Remove unused empty hosts. - Add LF to motd. - Fix missing desc and atime field of ZFS settings. - Load geom before import disks. - Remove lock before execute now of rsync client/local. - Fix using same ifield on file chooser. - Fix unknown state when creating ZFS pool. - Fix failure to detect installed device. - Fix wrong encrypted pass phrase with special characters. - Reflect owner and permission when ZFS config sync. - Fix error on empty ZFS config. - Fix gnop is not deleted at ZFS pool destruction. - Fix broken serial/model output. - Fix error on empty iSCSI target. - Fix VLAN is not configured. - Fix permission of /var/tmp/ftmp. - Fix AD password that contains a special character is not worked. - Fix Access AD does not set CIFS Authentication. - Fix IPv6 auto detection. - Fix display UTF-8 files on Diagnostics|Information|CIFS/SMB. - Fix sending UTF-8 mail without encoding. - Fix WebGUI cannot be accessed. - Fix access restriction is not changed when creating a dataset. - Fix labeled disk is showed as wrong method in vdev. - Remove unused php binary. - Fix nfs share error with ZFS dataset. - Fix multiple DNS server in setlanip. - Fix rsync client extra options is broken since r282. - Fix afpd error: Result too large. - Fix broken cron polling time jobs. - Fix broken execcmd scripts. - Fix AIO SMB2 broken file transfers. - Fix AD domain authentication. - Fix Add wol patch gbe driver. - Fix sipcalc does not support ipv6 zone index identifiers. - Fix the problem about hastd.conf. - Fix File Manager browsing /etc broken after rev 573. - Fix export subdirs for ZFS-type NFS exports failed to work. (B103) - Fix File Manager browsing /etc broken after rev 573. - Fix broken File editor. - fix password change broken rev 724. - fix reversed bits/bytes graphs. - fix SSL/TLS usage on email reports. What's New since 9.0.0.1 ======================== - Improve WebGUI under PHP 5.4. - Improve Webgui design and set UTF-8. - improve UPS Informations. - Add LiveUSB mode as same as LiveCD. - Revert to old CHS. - Change geometry to CHS=x,255,63 of embedded image. - Change php to php-cgi. - v9.6 config is forever marked as a blacklist. - Load zfs.ko and opensolaris.ko from loader. - Use AES-NI in geli by default. - Use clang for istgt by default. - Rewrite gui.js with jQuery. - Add HAST + iSCSI target service. - Add HAST + CIFS/SMB service. - Add HAST + GPT/UFS mount. - Add HAST + ZFS import/export. - Add HAST service WebGUI. - Add upgrade method from old system. - Add reload iSCSI target. - Add graid geom utility. - Add kern.geom.debugflags when installing. - Add jail related files. - Add HAST daemon and files. - Add rpcinfo utility. - Add vmstat utility. - Add acpiconf/wake utility. - Add sockstat utility. - Add dmidecode utility. - Add bzip2 utility. - Add vmxnet3 kernel module. - Add all kernel modules to boot media. - Add ability to edit sync property on ZFS dataset and volume. - Add ability to edit reservation property on ZFS dataset. - Add ability to edit permission on ZFS dataset. - Add ability to edit mountpoint of ZFS pool. - Add ability to import encrypted disks. - Add ability to import software raid disks. (except vinum) - Add ability to import single disks. (detect ZFS/UFS/NTFS only) - Add ability to configure multiple iSCSI LUNs. (disk type only) - Add ability to configure multiple portal/initiator group. - Add ability to configure HAST volume as iSCSI extent. - Add ability to configure bind interface of CIFS/SMB. - Add ability to edit power mode and CPU frequency. - Add ability to edit write cache mode on iSCSI target. - Add ability to edit upload directory of webserver. - Add ability to edit password server of CIFS/SMB. - Update mount points after importing disks. (GPT UFS/MBR UFS/GPT NTFS only) - Add bridge/carp interface support. - Add ZFS sparse volume support. - Add GPT UUID to mount point. - Add a warning for changing of the disk in config. - Add force flag to ZFS pool creation. - Add random SCSI serial when creating iSCSI target. - Add auto IPv6 fot WebGUI. - Add AES-CBC at disk encryption. - Add TCP wrapper check in FTP service. - Add allow trusted domains for Active Directory in CIFS/SMB service. - Wait response of LAN interface if static with gateway. - Run umount before iSCSI initiator shutdown. - Remount all after netif is up for iSCSI device. - Clear notify after execute now of rsync client/local. - Increase the number of config backup to 6. - Confirm permission on temporary directory. - Check DNS if firmware check/required service is enabled. - Remove existing cache and notify at boot. - Change default AIO size to 4096. - Change kern.maxfilesperproc to 50000. - Change default atime of ZFS dataset is on. - Change minimum UID/GID is 1000. - Change bind WebGUI to LAN only. - Change default ZFS arc size. - Change LDAP host to URIs. - Update SSL certificate and privatekey. - Add iscsi default values to default config. - Remove unused hw.ata.to from sysctl. - Remove AIO disable at boot. - Add 60days lifetime on ZFS auto snapshot. - Add ata chipset patch. (VT6420/VT6421) - Add amdtemp patch. - Add VM timer workaround. - Add useful PHP modules. - Add php wrapper for webserver. - Add sockstat to Diagnostics|Information|Sockets. - Add missing NUT drivers. - Add firefly pacth. - Add Chinese and Hungarian to file manager. - Use SCSI inquiry for model and serial. * The default login for NAS4Free WEBGUI username: admin password: nas4free Older notes =========== * Security note ============= http://www.freebsd.org/news/2012-compromise.html The build environment of NAS4Free uses always freebsd-update and portsnap and svn. So, you don't worry about NAS4Free, but user's extensions may install the packages via "pkg_add". Specially, if you have a jail environment, please take care yourself. If you don't know, it is recommended that you remove all jail hosts, then freshly install latest NAS4Free version and reinstall jail. * Upgrading FreeNAS 7 server? ============================== This version supports upgrading from FreeNAS 0.7.2 or 0.7.5. The supported lowest config version is 8.9. (0.7.2.5246) Versions older than 0.7.2.5246 are not supported. Also, restoring FreeNAS config is never supported. The password in FreeNAS config is not changed. If you want, change it, use option "3) Reset WebGUI Password" of Console setup. First boot of NAS4Free after upgrading from FreeNAS, it takes special convert mode for NAS4Free config 1.0. Once it finished, you can't downgrade to FreeNAS! Don't forget create backup configuration of NAS4Free after upgrading!
Source: readme.txt, updated 2014-04-28