DownloadCard generator for the russian L1-3/L3-3 tube tester.
WARNING: The software is still in alpha state, so there are definitely some bugs. If you want to use the created cards for real tests, check them manually with EXTREME care first .. else damage or destruction of your tester can easily occur. ESPECIALLY check if multiple conflicting functions are assigned to the same line (by looking on the universal card), which would lead to shorts.
New release!
Most of the old bugs should (still, no guarantees) be fixed by now and lots of functionality added. I created a good amount of cards for myself and they were all fine, so I deceided to make a public alpha release again. I also added a short manual (only German by now, translation soon follows) including a few examples.
If anything gets wrong, please report to me. I need your reports to fix bugs. You can help move this to beta ;).
Features
- Creates test cards for the L1-3/L3-3 tube tester automatically.
Project Samples
Categories
Test and MeasurementLicense
Creative Commons Attribution ShareAlike License V3.0Follow L3-3 Test Card Generator
User Reviews
-
Have an issue with making card for 6AQ5, problem is with G1 voltage, Can set voltage to Gi (either or both pins 1/7) confirmed by external meter to 12.5V. On checking/setting using (parameter contol to -G1 volts) to use internal meter, press 'measure' and voltage at tube drops to -5.6V read on external meter, internal meter does not a read voltage. Tube red-plates of course, its a good tube....
-
Большое спасибо за ваш генератор! Надеюсь, что этот проект будет поддерживаться . Из того, что хотелось бы видеть в нем, так это поддержка русского языка. Thank you so much for your generator! I hope that this project will be supported. From what I would like to see in it, it is the support of the Russian language.
-
I have found a minor bug: When "04: Octal" is selected in socket selection drop-down box, "Octal (Nr. 7)" is still presented on printing. This is an incorrectness in file l33konverter_en.qm Bite 2A54 value in this file should be changed from 7 to 4. Also I want to thank author for so useful tool. I really makes my hobby easier.Reply from L3-3 Test Card GeneratorEdited 2019-11-17
I didn't really get to work on the project the last years, but I did a quick (dirty) fix of this specific problem right now. (New snapshot should have fixed it, but please confirm!) Socket 4 and 7 are wired basically the same, but 7 has a choke in series with Pin 1 and an 1k resistor in series with Pin 4. Also a capacitor between pin 1 and 6, which is clearly some anti-oscillation-stuff.