2003-07-16 20:24:23 UTC
I run Debian on a Digital AlphaServer 5305. I installed karamba using apt-get and downloaded the karamba_test themes which are impressive on their own.
A quick tweak to the config gave me output for both CPU's which I have not been able to get from any other CPU monitoring application (Alpha servers with dual 64bit processors aren't commonplace).
The RAM for this machine lives on two seperate riser cards (a Gig for each processor), At the moment I can only see the output for one of the cards and can't see any way to tweak the config to show all of it.
The network card shares a PCI board with the Symbios Logic SCSI controller and is listed by lspci as a Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22). The network sensor seems to provide no output at all, so I'm wondering if the problem is with my wierd hardware or have I overlooked something?
Anyone have ideas for me to get these sensors working properly?
My config file is at:
http://thini.dyndns.org/main.theme
A screenshot is at:
http://thini.dyndns.org/desktop.png
Cheers,
/rob
