Name Modified Size Downloads / Week Status
Totals: 11 Items   8.2 MB 410
program folder < 16 hours ago 1 weekly downloads
Lazarus Project < 16 hours ago 54 weekly downloads
new_dxcc_database 2014-08-27 13 weekly downloads
Examples of logfiles 2014-07-07 3 weekly downloads
Callsigns and Names 2013-04-17 7 weekly downloads
setup_jt65-hf-hb9hqx-edition_09880.zip < 16 hours ago 3.2 MB 125125 weekly downloads
First_steps.txt < 16 hours ago 639 Bytes 66 weekly downloads
readme - jt65 - 09880.txt < 16 hours ago 10.5 kB 1414 weekly downloads
setup_jt65-hf-hb9hqx-edition_09869.zip 2014-09-05 3.1 MB 235235 weekly downloads
readme - jt65 - 09869.txt 2014-09-05 8.2 kB 2323 weekly downloads
Kurzanleitung_V09820.pdf 2014-07-08 1.9 MB 77 weekly downloads
Readme – Version The program is mainly based on W6CQz, Joe Large's JT65-HF (read "About JT65-HF"). It follows the same philosophy as the original, though many portions of the program have been recoded. Note: The database with configuration and other informations will be replaced. You must set some values, like Callsign, Grid, Sound Device, COM port, CAT, Log, Alert, SNTP and Color settings after first start of the new release. Move window "JT65-HF Output Level" away from mainwindow and set Dial QRG. Use checkboxes to activate Alert, SNTP (time correction) and/or VOX. The installer don't overwrite your logdatabase. The main features of the program: - Clearly arranged mainwindow with 4 additional windows: - Raw Decoder - Station Infos - Band Statistics - Output Level - Easy to use (semiautomatic, one click or enterkey) with - quick decoder, - RX-list with Tx-messages and additional informations (new station, grid or dxcc) and - callsign-labels of calling stations in waterfall display. - Automatically checks for duplicate new DXCC and new grid (different colors in RX-list). - Shows azimuth and distance (calculated form grid squares in km or mile). - Shows name of operator if available for use in messages. - Optional: - Acoustic alert after decoding. - Fix Tx DF for split mode in JT65. - Automatic adjust DT (same time as partner station). - Adjusts the program time with a internet timeserver (SNTP). - Spots received messages to pskreporter.info and/or JT65 RB Network. - Generates the file JT65hf-log.csv to cooperate with the JT65-HF Image Controller from JQ1HDR. - All settings saved in a database (jt65-config.sqlite). - All imported and logged QSOs are saved by default in a database (jt65-log.sqlite). - Edit logged QSOs (use Filter(s) and/or ordering to edit your logged QSOs). - ADIF: Import/Export log files (also used for eQSL). - MixW: Import/Export log files. - Selection of one of four different logdatabases: - JT65-Log (jt65-log.sqlite) with edit, import and export functions (default). - HRD My Logbook.mdb (Ham Radio Deluxe 5 logdatabase). - Mycall.mdb (DXKeeper logdatabase) if exists. - Mycall.sqlite (Log4om logdatabase) if exists. - Import text files containing callsigns and names. - PTT via COM port: RTS or DTR line (or VOX). - Optional: CAT control with OmniRig. (OmniRig must be installed and configured prior to using this feature). - Optional: CAT control with Hamlib. - Optional: CAT control with Ham Radio Deluxe 5. - Optional: CAT control with CI-V Commander (DXLab). - If CAT control: PTT via CAT command or COM port (or VOX). ------------------------------------------------------- New in - Log QSO in HRD My Logbook.mdb: Insert station callsign in 'COL_STATION_CALLSIGN' field. - After import a new log database and click on the 'Log QSO' button, it appears a SQL error message. This bug is fixed. - Following settings are not saved: 'Auto Adjust DT', 'Fix Tx DF', 'Rx DF = Tx DF', 'Singledecoder in QSO' and colorsettings of entries in Rx-List. It uses always default values instead of the saved values. This bug is fixed. - Changes of alertsettings have no influence of the alert test procedure. This bug is fixed. - Fatal bug in access function to a DXKeeper logdatabase is fixed. (Program freezes with an ODBC error message, because missing data in a memofield, e.g. 'QSL_Via' or 'Name'!) - Fatal bug in code for ptt control via COM port, if the same port is used by an other running program for CAT, e.g. HRD5 or CI-V Commander. This bug is fixed. If the selected port is missing or in use, then ptt via COM port is disabled. - Changes in decodercode for a better decode result. - New: Shows warning message if Dial QRG is not set. (Decodestep is skipped) - New: Optional logging direct into the SQLite logdatabase of Log4om. - New: CAT support of HRD5 via TCP. - New: CAT support of CI-V Commander (DXLab) via TCP. ------------------------------------------------------- New in - Selection of one of three different logdatabases in config window. - jt65-log.sqlite: Default logdatabase of JT65-HF HB9HQX-Edition - HRD My Logbook.mdb: Logdatabase from Ham Radio Deluxe 5 - mycall.mdb: Logdatabase from DXKeeper - Config window with new design (more tabs). - Station Info shows also continent, CQ- and ITU-zones - Bug in dxcc.sqlite (missing prefixes and countries) is fixed. - No more remove striplines (-------) in Rx-list. - New behavior of the edit names dialog window for easy insert operator names in the names database (e.g. from QRZ.COM). ------------------------------------------------------- New in - Bug with decimal separator (comma) in QRG values (kHz) is fixed. Many thanks to I0HOU for reporting this bug. - Shows 0 (kHz) in the QRG combobox at start of the program. The user must select the appropriate value or wait until the CAT control reads the QRG from rig. The decoder is disabled, if the value remains on 0 kHz! - New checkbox for "Auto Adjust DT" (same time as partner station). Same behavior like in earlier versions. - New checkbox to "Fix Tx DF" (for split mode in JT65). - Click in Rx-list corrects the dB sent value and generats a reasonable message. - New Hamlib CAT control with rigctld as daemon. Now automatic restart after issues, indicating with yellow label "Start HamLib". Update time is one second, delay by QRG setting with combobox is 3 seconds. - New checkbox in configuration window to save the received messages in the old JT65-HF format. Filename: "JT65hf-log.csv". This is useful for cooperation with the program "JT65-HF Image Controller" from JQ1HDR. "Date","Time","QRG","Sync","DB","DT","DF","Decoder","Exchange" "2014-07-05","11:36","14076","2","-18","0.4","-684","B","UA3IIJ DH1JAD R-01","65A" - New waterfall display with stronger JT65 signals (improved visibility). - "Audio Input Level" display reaches now from 0 % to 100 %. The value is not critical, but the signal should be clean. Use voltage divider direct on microphon input of sound device to reduce the level. - The last "Free Text" is saved in config database. - Rapid decode result with singledecoder and multidecoder. - New format of the textfile with all sent and received messages: Date Time QRG Sync dB DT Decoder Exchange 2014-06-27 06:37 18104169 2 -26 0.1 K UA4A RRR 73 ------------------------------------------------------- New in - note: Left click instead of double click in RX-list to start a QSO (to prevent troubles and issues with double click) - Clever focus settings to generate messages and log the QSO with the Enter-Key (Semiautomatic standard QSOs in JT65) - No more automatic adjust DT if clicks in RX-list - A lot of changes to improve the behavior of the GUI-event- and timer-loop ------------------------------------------------------- New in - Two bugs where fixed. Wrong QRG in Log and no QRG mark in Band Statistics. - Bug in Edit Log (save changed band) is fixed. (new Bands 6 m and 2 m!) ------------------------------------------------------- New in - The design of mainwindow has changed (unused widgets are hidden) - PTT control via DTR line is also possible (default PTT line is RTS) - Optional: Shows callsign labels in waterfall display (only if station is calling CQ) - New: 6 m and 2 m bands are provided now (in Station Info and Band Statistics) - Right click in RX list to copy callsign, signallevel and grid (instead of Left click!) - A lot of bugs where fixed - New default Dial-QRGs (USB) for 80m, 40m and 30m bands (3586 kHz, 7042 kHz and 10142 kHz) to prevent conflicts with IARU-bandplan respectively with detached CW operators who are searching a free QRG on old JT65-HF bandsegments (3576 KHz, 7067 kHz and 10138 kHz) ;-) Not solved: - Delayed program start after a newstart of operating system (win7). - Missing user guide in english (But "Kurzanleitung" in german is availabel). ------------------------------------------------------- New in - Display of "Audio Input Level": 0% - 50%. Note: This value is not critical! - SNTP Checkbox and Indicator (adjust program time via internet). - Improved waterfall display. - Decodertype "D" in RX-List: K = Koetter-Vardy (KVASD_g95.EXE). - SNTP settings: URL of timeserver and update interval. - PTT settings: CAT or RTS line. - Correct timestamp for (delayed) display decodes in RX-list. - Bug in ADIF import - if decimalseparator is a comma - is fixed. - Improved HamLib CAT control. Reconnect rigctl.exe and read QRG once per minute. - About window shows correct version text. - Improved behavior of "Singledecoder in QSO". ------------------------------------------------------- New in - Bug: No decode result in first run, if "Singledecoder in QSO" is activated (fixed). - Bug in decoder thread resulting in no decode if too many signals are detected (fixed). - New interesting feature: Acoustic Alert after decoding, if successful Decode, CQ of a new Station, New Grid, New DXCC or My Callsign was detected. To activate this feature, you use a second 16 bit audio device !!! - New Algorithm with HamLib CAT control (TCP/IP connection to rigctld.exe). Tested over a longer period. HamLib is stable, short delay after reading QRG is normal. - Bug in TX watchdog fixed. - SQLite bug fixed: No more problem, if "my callsign" begins with a number (eg. 2E0XXX). - Improved import of ADIF- and MixW-logfiles. If records are present in logdatabase you can choose between replace and add (no replace). - 3 new buttons on mainwindow: Clear RX list, Clear Generated text and Clear Station field. - Station field and generated text where cleared after band change and Adjust DT is set to 0.0. ------------------------------------------------------- Thank you for all bug reports and suggestions (hb9hqx at uska.ch). Use also the support group for bugreports, questions and suggestions: https://groups.google.com/forum/#!forum/jt65-hf-hb9hqx-edition Brig, September 30, 2014 Beat, HB9HQX
Source: readme - jt65 - 09880.txt, updated 2014-09-30