Intel Ethernet Drivers and Utilities

4.8 Stars (25)
18,722 Downloads (This Week)
Last Update:
Download iqvlinux.tar.gz
Browse All Files
Linux

Description

This project contains the Linux kernel drivers for all Intel(R) Ethernet adapters and LOMs (LAN On Motherboard). To learn more about Intel Ethernet visit http://communities.intel.com/community/wired

Mailing list for out-of-tree Support:
e1000-devel@lists.sourceforge.net

Mailing list for in-kernel Support:
intel-wired-lan@lists.osuosl.org

Intel Ethernet Drivers and Utilities Web Site

Features

  • e1000e driver
  • ixgbe and ixgbevf driver
  • igb and igbvf driver
  • i40e and i40evf drivers
  • lldpad daemon
  • ethregs register dump utility
  • e1000 driver: The e1000 driver is changed to a kernel only support model. (The latest release of e1000 driver was version 8.0.35)

KEEP ME UPDATED

User Ratings

★★★★★
★★★★
★★★
★★
23
0
1
0
1
ease 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5 4 / 5
features 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5 4 / 5
design 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5 5 / 5
support 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5 5 / 5
Write a Review

User Reviews

  • dwisehart
    1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Works just as well as you hoped it would. If, at your own risk, you want to support both 1Gb and 10Gb with SFP+ modules that have not been tested with both--and are not advertised to work with both--just make multispeed_fiber always true: --------------------- ixgbe/ixgbe-4.0.3/src/ixgbe_phy.c ---------------------- index 102dd53..a3e5f74 100644 @@ -1451,7 +1451,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) hw->phy.sfp_setup_needed = true; /* Determine if the SFP+ PHY is dual speed or not. */ - hw->phy.multispeed_fiber = false; + hw->phy.multispeed_fiber = true; if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) && @@ -1771,7 +1771,7 @@ s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) hw->phy.sfp_setup_needed = true; /* Determine if the QSFP+ PHY is dual speed or not. */ - hw->phy.multispeed_fiber = false; + hw->phy.multispeed_fiber = true; if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&

    Posted 04/29/2015
  • adampski
    1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    I cannot comment on the driver as I could not get it work on Ubuntu. I thought i'd give it a go, even though I knew it wasn't apart of the supported list. Ubuntu 14.04, 3.13.0-24-generic kernel, Intel Corporation Ethernet Connection I217-V (rev 05). **UPDATE** Booting without the cable plugged in helped!

    Posted 05/03/2014
  • egberts
    1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    For older non-current CentOS boot kernel (such as 1 or 2 sub-revisions behind), you're forced to install the full-source CentOS linux kernel into /usr/src/linux. Cannot rely on 'kernel-devel' package then. Certainly, not Intel's fault. but it works very well.

    Posted 02/02/2014
  • melaniejensen
    1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Great stuff.

    Posted 05/31/2013
  • tfileme
    1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Easy for use.

    Posted 05/10/2013
Read more reviews

Additional Project Details

Languages

English

Intended Audience

Advanced End Users, System Administrators, Developers, End Users/Desktop

User Interface

Web-based, Command-line

Programming Language

C, PHP

Registered

2001-12-18