I started this project because a lot of users, including me build servers
without CDROM drive and want to be able to install from a usb-flash.
Installation from USB flash can be useful if user want install
NAS4FREE on the hard drive, full and embedded + data + swap.
Otherwise, I strongly recommend using the original image file
from http://sourceforge.net/projects/nas4free/files/ File named NAS4Free-<CPU>-embedded-<VERSION>.img
In future, if image content CPU name, this image only for specified CPU
If image not content it - 2in one.
1. NIghtly Built version of usb_nas4free for x-86 processors, called usb_nas4free_x86.bin.gz
It need 1G flash
2. All in One image called n4free_usb_full.bin.gz with boot promt
F1 is x86 boot
F2 is x64 boot
F5 hard disk
F6 PXE - boot
boot: < when flash be boot>
After 10 sec when any key not pressed boot will from saved location
It need 512M minimum flash size