Re: [wsjt-devel] Yaesu FT-991 CAT Codes released

[Michael B. <mdb...@ya...>]

Found a typo....
Try this replacement executable first....then if that doesn't work this time
try the installation package.  The executable builds a lot faster so I'd
prefer just to send that if possible
https://www.dropbox.com/s/mj6qgyjphr1ts7v/wsjtx.exe?dl=0

https://www.dropbox.com/s/0u3l9nzdbu4k5lg/wsjtx-1.5.0-devel-win32-r4988-ft95
1-3.exe?dl=0


Mike W9MDB


-----Original Message-----
From: Chuck Forsberg WA7KGX [mailto:ca...@om...] 
Sent: Sunday, March 01, 2015 11:00 AM
To: WSJT software development
Subject: Re: [wsjt-devel] Yaesu FT-991 CAT Codes released


This gets the same error

When I test the CAT the message is:
Hamlib: Feature not available while opening connection to rig



On 03/01/2015 08:30 AM, Michael Black wrote:
> That executable works for me...strange...
>
> Anyways...new package to install
> https://www.dropbox.com/s/msavsc0r33pi134/wsjtx-1.5.0-devel-win32-r498
> 8-ft95
> 1-2.exe?dl=0
>
> Mike W9MDB
>
>
> -----Original Message-----
> From: Chuck Forsberg WA7KGX [mailto:ca...@om...]
> Sent: Sunday, March 01, 2015 10:17 AM
> To: WSJT software development
> Subject: Re: [wsjt-devel] Yaesu FT-991 CAT Codes released
>
> I replaced rgw wsjtx.exe with the new one and now wsjtx won't run, 
> complaining about the wrong version of Windows.
>
> On 03/01/2015 05:47 AM, Michael Black wrote:
>> OK...fixed that error...a few other places in the code have to know 
>> about a new Yaesu rig.
>> Always a learning experience modifying somebody else's code.
>>
>> All you need is a new wsjtx.exe to replace the old one:
>> https://www.dropbox.com/s/mj6qgyjphr1ts7v/wsjtx.exe?dl=0
>>
>> Mike W9MDB
>>
>> -----Original Message-----
>> From: Chuck Forsberg WA7KGX [mailto:ca...@om...]
>> Sent: Sunday, March 01, 2015 4:54 AM
>> To: WSJT software development
>> Subject: Re: [wsjt-devel] Yaesu FT-991 CAT Codes released
>>
>> I repaired the URL, downloaded and installed.
>> When I test the CAT the message is:
>> Hamlib: Feature not available while opening connection to rig
>>
>> After exiting WSJTX I opened the com port at 4800 bps and was able to 
>> send a command "mc011;" which jumped to memory 11.
>>
>> On 02/28/2015 09:35 PM, Michael Black wrote:
>>> If I make a test package for you would you care to test it?
>>> Looks like a couple of small changes might work.  I see only three 
>>> commands, FA, FB, and MW that need changing at this point with just 
>>> a
>> cursory glance.
>>> Funny that the FT950 manual shows 11 positions for the FB 
>>> command...must be an error in the manual.
>>>
>>> Mike W9MDB
>>>
>>> -----Original Message-----
>>> From: Chuck Forsberg WA7KGX [mailto:ca...@om...]
>>> Sent: Saturday, February 28, 2015 5:00 PM
>>> To: wsj...@li...
>>> Subject: Re: [wsjt-devel] Yaesu FT-991 CAT Codes released
>>>
>>> The 991 covers 30 kHz to 470 MHz, so the frequency argument requires 
>>> one more digit than the 950 uses.
>>> As the Yaesu docs point out, the radios do not tolerate commands 
>>> with imperfect formatting.  That includes the number of digits used 
>>> to express frequency.
>>>
>>> On 02/28/2015 01:26 PM, Michael Black wrote:
>>>> Looks to me like it supports the newcat.c command set pretty well.
>>>> Just need aniother entry as it looks slightly different than the 
>>>> models already in there.  Closest to the 950 though by a quick glance.
>>>> Looks like the 950 entry might work for WSJT operations.
>>>> For example, I see it has a "BA" command which isn't listed in
newcat.c.
>>>> But all the major commands are identical.
>>>> 73
>>>> Mike W9MDB
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: Chuck Forsberg WA7KGX [mailto:ca...@om...]
>>>> Sent: Saturday, February 28, 2015 5:25 AM
>>>> To: WSJT software development
>>>> Subject: [wsjt-devel] Yaesu FT-991 CAT Codes released
>>>>
>>>> Yaesu have released the CAT codes for their FT-991 transceiver.
>>>> The format is unlike any CAT codes I have seen before.  The format 
>>>> reminds me of GPIB commands for instruments such as the Racal-Dana
>>>> 1992 counter and Tektronix 2712 spectrum analyzer.
>>>>
>>>> Google "yaesu ft-991" to get to the Yaesu web site ft-991 section.
>>>>

-- 
      Chuck Forsberg WA7KGX   ca...@om...   www.omen.com
Developer of Industrial ZMODEM(Tm) for Embedded Applications
   Omen Technology Inc      "The High Reliability Software"
10255 NW Old Cornelius Pass Portland OR 97231   503-614-0430


----------------------------------------------------------------------------
--
Dive into the World of Parallel Programming The Go Parallel Website,
sponsored by Intel and developed in partnership with Slashdot Media, is your
hub for all things parallel software development, from weekly thought
leadership blogs to news, videos, case studies, tutorials and more. Take a
look and join the conversation now. http://goparallel.sourceforge.net/
_______________________________________________
wsjt-devel mailing list
wsj...@li...
https://lists.sourceforge.net/lists/listinfo/wsjt-devel