From: Stephen W. <sw...@am...> - 2000-04-25 20:42:06
|
DRAT! i was afraid of that. i'll see when i can get around to it but i can't make any guarantees. NOTE: i'm not on the glx-dev list so if anyone's just responding to that i won't get it... thanks, -s Nathan Hand wrote: > Ok, could you recompile utah-glx with the -g option added to CFLAGS and > then use gdb to find where the segfault is. There's not that much I can > do with the symbol-free values below. The instructions on what you need > to do are in the X server trace from your post (included below). > > On Tue, Apr 25, 2000 at 08:49:01AM -0500, Stephen Waters wrote: > > debian woody, just updated today > > nvidia tnt1 > > aptable glx from http://debian.oftheInter.net/glx > > > > if i comment out the glx.so Module line it works fine. > > i do not have agpgart installed. is this necessary with TNT1? > > > > thanks, > > -s > > > > XFree86 Version 3.3.6 / X Window System > > (protocol Version 11, revision 0, vendor release 6300) > > Release Date: January 8 2000 > > If the server is older than 6-12 months, or if your card is > > newer > > than the above date, look for a newer version before reporting > > problems. (see http://www.XFree86.Org/FAQ) > > Operating System: Linux 2.2.14 i586 [ELF] > > Configured drivers: > > SVGA: server for SVGA graphics adaptors (Patchlevel 1): > > NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, > > RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256, > > GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, > > ET4000W32i_rev_b, > > ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, > > ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, > > wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, > > ati, > > sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, > > sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, > > tvga8200lx, > > tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, > > tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, > > tgui9420dgi, > > tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, > > tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, > > cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, > > cyberblade, > > clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, > > clgd5430, > > clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, > > clgd5465, > > clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, > > clgd7543, > > clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, > > mga2064w, > > mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, > > oti067, > > oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, > > ali2308, > > ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, > > ark1000pv, > > ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422, > > AT24, > > AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, > > ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, > > ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, > > ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, > > i740_pci, > > i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic > > (using VT number 7) > > > > XF86Config: /usr/X11R6/lib/X11/XF86Config > > (**) stands for supplied, (--) stands for probed/default values > > (--) no ModulePath specified using default: /usr/X11R6/lib/modules > > Sucessfully loaded XFree86 3.3 symbols > > GLX extension module for XFree86 3.3.3.1 -- Mesa version 3.2 > > GLX package version 0.9, GLX protocol version 1.2. > > (**) module glx.so successfully loaded from /usr/X11R6/lib/modules > > (**) XKB: rules: "xfree86" > > (**) XKB: model: "pc104" > > (**) XKB: layout: "dvorak" > > (**) Mouse: type: IMPS/2, device: /dev/mouse, resolution: 200 > > (**) Mouse: buttons: 5 > > (**) Mouse: zaxismapping: (-)4 (+)5 > > (**) SVGA: Graphics device ID: "Primary Card" > > (**) SVGA: Monitor ID: "Primary Monitor" > > (**) FontPath set to > > "/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/URW,tcp/localhost:7101" > > (--) SVGA: PCI: NVidia Riva TNT rev 4, Memory @ 0xe0000000, 0xe3000000 > > (--) SVGA: chipset: RIVA TNT > > (--) SVGA: videoram: 16256k > > (**) SVGA: Option "dac_8_bit" > > (**) SVGA: Using 32 bpp, Depth 24, Color weight: 888 > > (--) SVGA: Maximum allowed dot-clock: 350.000 MHz > > (**) SVGA: Mode "1152x864": mode clock = 103.000 > > (**) SVGA: Mode "1024x768": mode clock = 85.000 > > (**) SVGA: Mode "800x600": mode clock = 69.650 > > (**) SVGA: Mode "640x480": mode clock = 45.800 > > (**) SVGA: Mode "320x200": mode clock = 12.588 > > (**) SVGA: Mode "320x240": mode clock = 15.750 > > (**) SVGA: Mode "400x300": mode clock = 25.000 > > (--) SVGA: Virtual resolution set to 1152x864 > > (--) SVGA: SpeedUp code selection modified because virtualX != 1024 > > (--) SVGA: RIVA TNT: Using hardware cursor > > nvisual=32 (0+32) > > (--) SVGA: Using XAA (XFree86 Acceleration Architecture) > > (--) SVGA: XAA: Solid filled rectangles > > (--) SVGA: XAA: Screen-to-screen copy > > (--) SVGA: XAA: 8x8 color expand pattern fill > > (--) SVGA: XAA: Using 9 128x64 areas for pixmap caching > > (--) SVGA: XAA: Caching tiles and stipples > > (--) SVGA: XAA: Horizontal and vertical lines and segments > > Caught signal 4. > > > > Server aborting... > > > > eip: 4035a872 eflags: 00013246 > > eax: 08369fab ebx: 403cb9b4 ecx: 00000002 edx: 0000250a > > esi: 08369fac edi: bffffd94 ebp: 00000001 esp: bffffbe4 > > Stack: 403cb9b4 08369f98 bffffd94 00000005 3905803d 00000000 390593d1 > > 00000000 > > 00000000 00002568 403cb9b4 4035a65c 08369f98 08369f98 00002563 > > 4035a540 > > 403cb9b4 403b73aa bffffd94 bffffcec 08369f08 0000004c 00000301 > > 00000000 > > 08360000 00066010 000081a4 00000001 00000000 00000000 000003bf > > 00000000 > > Call Trace: 0828beec 0828b87c 08195a34 08170e21 081984ce 08198488 > > 082ce86c > > 08081c20 08081c41 08198228 082ce86c 08081c20 > > Code: 0f 45 f0 89 cd eb 09 8d b4 26 00 00 00 00 45 46 8a 16 80 fa > > > > Please forward information about this crash to XFree86@XFree86.org > > including the _full_ output of the X server. > > > > To analyse the crash dump, please type > > > > gdb X /root/core > > where > > > > and include this output in your report. Thanks! > > > > X connection to :0.0 broken (explicit kill or server shutdown). > > > > _______________________________________________ > > utah-glx-dev mailing list > > uta...@li... > > http://lists.sourceforge.net/mailman/listinfo/utah-glx-dev > > > > |