Menu
▾
▴
Re: [uml-devel] buggy UML AMD64?
|
From: Antoine M. <an...@na...> - 2007-01-21 14:49:55
|
Joel Palmius wrote:
> Confirmed on my athlon64 gentoo setup. I've been running 2.6.14.3 as
> host kernel for ages (since I was too wimpy to try to upgrade a host
> kernel remote on a machine that required binary proprietary drivers).
>
> On 2.6.14.3 x86_64 all my 32bit UMLs run fine with various guest kernels
> compiled in various circumstances.
on x86 I was able to upgrade as far as 2.6.15.x, 2.6.16 and later broke.
So you may be able to upgrade by one minor release (not much - and
2.6.15 is no longer maintained, whereas 2.6.16 is... damn)
> On 2.6.18-gentoo-r6 x86_64 (genkernel), all guest UMLs spin up to 100%
> and does nothing, no output whatsoever.
Finally someone confirms what I have been seeing for ages!
Maybe the devs can find out what is going on now...
It does look like a host kernel issue, but since other people are
reporting no errors with the same kernels, I wouldn't completely discard
the possibility that glibc has something to do with this.
Also, there was a report today that *_FS_SECURITY is causing problems.
Do you happen to have *_FS_SECURITY options switched on (on the host)?
Antoine
> Strace says:
>
> execve("./vmlinux", ["./vmlinux"], [/* 28 vars */]) = 0
> [ Process PID=13658 runs in 32 bit mode. ]
> uname({sys="Linux", node="master", ...}) = 0
> brk(0) = 0xffffffffa0314000
> brk(0xa0314844) = 0xffffffffa0314844
> set_thread_area(0xffdb51d0) = 0
> brk(0xa0335844) = 0xffffffffa0335844
> brk(0xa0336000) = 0xffffffffa0336000
> getrlimit(RLIMIT_STACK, {rlim_cur=-4286578688, rlim_max=4292563436}) = 0
> rt_sigaction(SIGINT, {0xc0000000a001cad8, [], 0}, NULL, 8) = 0
> rt_sigprocmask(SIG_UNBLOCK, [INT], NULL, 8) = 0
> rt_sigaction(SIGTERM, {0xc0000000a001cad8, [],
> SA_INTERRUPT|SA_ONESHOT|0x161e48}, NULL, 8) = 0
> rt_sigprocmask(SIG_UNBLOCK, [TERM], NULL, 8) = 0
> rt_sigaction(SIGHUP, {0xc0000000a001cad8, [], 0}, NULL, 8) = 0
> rt_sigprocmask(SIG_UNBLOCK, [HUP], NULL, 8) = 0
> fstat64(0x1, 0xffdb4ad8) = 0
> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
> 0x1000) = 0xfffffffff7fe8000
> mmap2(NULL, 4096, PROT_READ|PROT_WRITE|PROT_EXEC,
> MAP_PRIVATE|MAP_ANONYMOUS, -1, 0x1000) = 0xfffffffff7fe7000
> clone(child_stack=0xf7fe7fd4, flags=|SIGCHLD) = 13659
> --- SIGCHLD (Child exited) @ 0 (0) ---
> waitpid(13659, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGSTOP}], WSTOPPED) =
> 13659
> ptrace(0x15 /* PTRACE_??? */, 13659, 0, 0x1) = -1 EINVAL (Invalid
> argument)
>
>
> Pity... I had finally decided to upgrade the host kernel... :-)
>
> // Joel
>
>
> On Fri, 19 Jan 2007, Antoine Martin wrote:
>
>> Antoine Martin wrote:
>>>>>> I have downgraded the x86 boxes to 2.6.15.7 and these are up and
>>>>>> running again. But I can't do that for all of them, and this is just
>>>>>> not an option for some of the amd64 boxes.
>>>>>
>>>>> My setup is:
>>>> Thanks for that. That is very similar to mine.
>>>> I don't think this has anything to do with the guest... So I'll try to
>>>> remove the skas3 patch from the host and see how it goes.
>>>>
>>> I did, and no improvement... x86 guests still hang.
>>> Could you post a binary guest kernel somewhere so I can try that?
>>> (even if it isn't static - glibc should be similar since we're using
>>> Gentoo amd64)
>>> If that still does not work then I can be certain that it is something
>>> to do with the host.
>> I've just tried on 3 more hosts, all AMD64 Gentoo fully up to date,
>> kernel 2.6.19.2. No skas, no exec shield, no selinux, plain kernel.org:
>> None of them work with any of the 32-bit kernels!
>> It prints nothing, just sits there spinning at 100% cpu.
>> So I am now totally convinced that i haven't got a weird setup.
>> Something else is broken in UML.
>>
>> On fully up to date Fedora Core 6 x86_64, the kernel does display
>> something before crashing:
>> # uname -a
>> Linux localhost.localdomain 2.6.18-1.2869.fc6 #1 SMP Wed Dec 20 14:51:34
>> EST 2006 x86_64 x86_64 x86_64 GNU/Linux
>> # ./kernel32-2.6.19.2
>> Checking that ptrace can change system call numbers...OK
>> Checking syscall emulation patch for ptrace...missing
>> Checking for tmpfs mount on /dev/shm...OK
>> Checking PROT_EXEC mmap in /dev/shm/...OK
>> Checking for the skas3 patch in the host:
>> - /proc/mm...not found
>> - PTRACE_FAULTINFO...not found
>> - PTRACE_LDT...not found
>> UML running in SKAS0 mode
>>
>> [root@localhost home]#
>>
>> This is 100% repeatable. Plain Fedora.
>> Many users will have a similar setup and will just give up on UML.
>> So I as I said before, UML is currently unusable for most people out
>> there running fairly recent systems.
>>
>> Antoine
>>
>> -------------------------------------------------------------------------
>> Take Surveys. Earn Cash. Influence the Future of IT
>> Join SourceForge.net's Techsay panel and you'll get the chance to
>> share your
>> opinions on IT & business topics through brief surveys - and earn cash
>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>> _______________________________________________
>> User-mode-linux-devel mailing list
>> Use...@li...
>> https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
>>
>
|