On Wed, Mar 10, 2010 at 10:32:00PM +0000, rupert_mail-unichrome@... wrote:
> Thanks Luc,
> I managed to get the make to work shortly before you replied by a
> slightly different route, I did :-
> sudo apt-get build-dep xserver-xorg-core
> this pulled in a whole load of "stuff" and the process seamed ok after that.
Yup, same end result :)
> Right next question.
> I installed it as per instructions.
> Now I can get TV out working without the machine locking up which is a
> major plus.
> The only problem is the TV signal out is a bit juddery when doing a
> live TV watch.
> I have a PAL TV plugged into S-Video port, Ive done nothing more than
> let it auto configure.
> Im using a Hauppage TD-500 to capture DVB.
> My hardware is a Via EPIA M10000 with the CLE266 chipset and a GB of Ram.
> There could be a whole lot of things wrong my Hauppage config or the
> config of unichrome driver.
> Am I being realistic of my expectations of the config above being
> capable of runing mythtv?
> Ive been using the same config apart from a T-500 for a while as a
> backend server, but Ive always used a moded xbox runing XBMC as the
> front end, so Im not really sure if the HW has enuf capability for the
> front end?
> Assuming the HW is ok, what do I look at tweaking next?
Check the manpage, and try playing with some of the options under:
Supported TV Encoders -> "VIA Technologies VT1622, VT1622A, VT1623"