sysless Log


Commit Date  
[e63cb5] by Pavel Pisa Pavel Pisa

LPC SSP SPI: correction for 16 bit wide transfer mode.

16-bit transfer mode is not tested nor used in the current
application.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2014-01-07 16:46:10 Tree
[a3f805] by Pavel Pisa Pavel Pisa

LPC17xx: U2Uv2 application configuration which can be combined with multiple boards.

The "config.u2uv2-common" file includes only application specific
configuration section and can be combined with board specific
configuration section to build U2Uv2 specific for given board.
That uLAN to USB converter for LPC1758 based ULAD32 board
is build by next command sequence

cd ulan/embedded
ln -s board/arm/lpc17xx-common/config/config.u2uv2-common config.omk
ln -s board/arm/lpc17xx-common/config/config.ulad32 config.target
make default-config
make

Firmware flashing over USB is invoked by

cd app/u2u/ver2
make load run USB=1

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-12-03 19:13:46 Tree
[2fdfde] by Pavel Pisa Pavel Pisa

LPC17xx: MPX-UU-PC board specific U2Uv2 configuration file-name includes board extension now.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-12-03 19:00:23 Tree
[40a7ea] by Pavel Pisa Pavel Pisa

LCP17xx: unify names of DCDC controller PWM signals for ULAD32 BSP.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-11-19 23:39:26 Tree
[02dc61] by Pavel Pisa Pavel Pisa

LCP17xx: correct pin definition for ULAD32 board.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-11-19 13:19:13 Tree
[eada33] by Pavel Pisa Pavel Pisa

LPC178x: correct and extend pin configuration to allow select ADC mode.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-11-12 19:10:58 Tree
[d9fcbc] by Pavel Pisa Pavel Pisa

LPC178x: allow explicit allocation of SDRAM even for internal memory applications.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-11-11 21:21:06 Tree
[ce0326] by Pavel Pisa Pavel Pisa

lpc1788/lx_cpu1: correct application erase range to cover all 512 kB of FLASH.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-11-10 18:36:21 Tree
[4a1f39] by Pavel Pisa Pavel Pisa

LX_CPU1: On-board I2C peripherals are connected to I2C interface 0.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-10-22 18:43:09 Tree
[e37dc5] (ul_drv-1.0.0-release) by Pavel Pisa Pavel Pisa

LX_CPU1: specify which SPI interface is intended for display and keyboard connection.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-10-15 15:39:17 Tree
[a2958f] by Pavel Pisa Pavel Pisa

Define configuration and pin definition for ULAD32 board.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-09-10 20:58:25 Tree
[205030] by Pavel Pisa Pavel Pisa

Use system wide lpc21isp for lpc17xx targets.

Tested with lpc21isp version 1.94.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-09-10 20:52:55 Tree
[74d11a] by Pavel Pisa Pavel Pisa

SPI driver extended to enable per transfer specific mode.

Feature implemented in NXP LPC SPI driver for now.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-09-10 13:28:09 Tree
[185440] by Martin Meloun Martin Meloun , pushed by Pavel Pisa Pavel Pisa

LPC178x: Change XC_INIT_PIN output to open drain

XC_INIT_PIN is bidirectional, first used as input for the configuration
process, then used as a reset signal for the user application.

Signed-off-by: Martin Meloun <meloumar@cmp.felk.cvut.cz>

2013-08-26 07:28:58 Tree
[aae792] by Pavel Pisa Pavel Pisa

LPC178x: Correct peripheral clock frequency to be 72MHz.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-04-23 15:19:34 Tree
[5adb4d] by Pavel Pisa Pavel Pisa

LPC17xx and LPC178x: Add definitions of timer registers bits.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-04-23 15:18:07 Tree
[0d8bc8] by Pavel Pisa Pavel Pisa

Protect against UNUSED_PARAM param redeclaration.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-02-26 11:52:24 Tree
[4898e4] by Roman Bartosinski Roman Bartosinski

Add macro UNUSED_PARAM to arch/arm/generic/libs/misc/system_stub
This macro is for suppressing warnings about unused parameters.

Signed-off-by: Roman Bartosinski <bartosr@centrum.cz>

2013-02-24 17:29:07 Tree
[e8ffd3] by Martin Meloun Martin Meloun , pushed by Pavel Pisa Pavel Pisa

LX_CPU1: Do not force compiler / communication settings

Compiler / communication variables are set as "?=" instead of "="

2013-01-20 15:21:57 Tree
[0d0bc3] by Martin Meloun Martin Meloun , pushed by Pavel Pisa Pavel Pisa

LX_CPU1: Fix sections in linker scripts

Added missing exception section and put rodata into it's own section

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-01-20 14:46:25 Tree
[4501aa] by Pavel Pisa Pavel Pisa

LX_CPU1: Do not override LED1 pin function by LCD function.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-01-10 15:59:52 Tree
[a92d19] by Pavel Pisa Pavel Pisa

LPC178x: obscure but functional solution to start application from SDRAM.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-01-06 00:39:43 Tree
[459e36] by Pavel Pisa Pavel Pisa

LPC178x: correct ldscript and provide command to load to SDRAM.

The mechanism to automate start of application from SDRAM
has to be tuned still.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-01-05 23:35:55 Tree
[4467c7] by Pavel Pisa Pavel Pisa

misc: add si_ulong() function to allow parse high address values.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-01-05 22:16:11 Tree
[444326] by Pavel Pisa Pavel Pisa

LPC178x: background MPU map has to be enabled to allow IAP to work.

The IAP FLASH programming functions use some regions not covered
by regions defined for MPU. Allow use background region map
(PRIVDEFENA) for privileged mode code.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

2013-01-05 22:15:11 Tree
Older >