HAL does not add net object

Help
Marlas
2011-10-24
2013-05-23
  • Marlas
    Marlas
    2011-10-24

    Hi
    I've used synce with many devices without problem, but recently i found problems with one device - Windows Mobile 6.53.
    What i've got:
    Debian squeeze kernel 2.6.37
    synce-hal 0.15-1
    librapi2 0.15-1
    synce-sync-engine 0.15-2

    When i pug in device with started lshal -monitor i usually get only :
    09:46:42.681: usb_device_1114_18_e6461300_e704_0801_3754_364615311b01 added
    09:46:42.687: usb_device_1114_18_e6461300_e704_0801_3754_364615311b01_if1 added
    09:46:42.691: usb_device_1114_18_e6461300_e704_0801_3754_364615311b01_if0 added

    usually there is no
    net_80_00_60_0f_e8_00 added
    and no command synce-.. works

    But network interface is created
    ifconfig:

    ...
    eth1      Link encap:Ethernet  HWaddr 80:00:60:0f:e8:00  
              inet addr:169.254.2.2  Bcast:169.254.2.255  Mask:255.255.255.0
              inet6 addr: fe80::8200:60ff:fe0f:e800/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:18 errors:18 dropped:0 overruns:0 frame:0
              TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:1267 (1.2 KiB)  TX bytes:10314 (10.0 KiB)
    ...
    

    and I can ping WM device.

    I sad usually, because sometimes HAL adds all objects and everything is ok.

    Could anybody help?