Just Launched: You can now import projects and releases from Google Code onto SourceForge
We are excited to release new functionality to enable a 1-click import from Google Code onto the Allura platform on SourceForge. You can import tickets, wikis, source, releases, and more with a few simple steps. Read More
1. Install Debian Etch
deb http://www.atlantech.com/~john/openssi-etch ./
to your sources.list
Pin: origin http://www.atlantech.com
to your /etc/apt/preferences
4. Create a file /etc/apt/apt-conf.d/90allow-unauthenticated containing:
5. apt-get update
6. apt-get install initrd-tools
7. Add the module for your cluster-interconnect nic to
8. modprobe loop
9. apt-get dist-upgrade
At this point you will be warned that the running kernel will be
removed. This is because of a necessary downgrade of udev. Allow
it to happen.
:-( Warning - your system is unbootable starting from this point.
10. apt-get install openssi
configure the node number, cluster interconnect,2 clustername,
root failover as usual.
11. apt-get install syslinux if it's not already installed (temporary
step due to an error on my part).
12. :-) Your system should now be rebootable. Reboot it.
13. The current version of dhcpd has an irritating "bug" - it no
longer has a default for the "next-server" option (i.e. the
address of the tftp server). You'll have to add the option:
(where xxx.xxx.xxx.xxx is the cluster interconnect address for the
initnode) to the file /etc/dhcp3/dhcpd.proto
invoke-rc.d dhcp3-server restart
16. Now you can try booting a secondary node with etherboot or PXE,
then ssi-addnode as usual
Still many rough edges, and the kernel is not up-to-date with Roger's
latest work, put it works somewhat.
All the sources are available for "apt-get source" at the same location
as the binaries.