Mark Nienberg wrote:
>Bruce Allen wrote:
>>> I have three new Western Digital drives behind a 3ware controller.
>>> They all report failure of an Unknown_Attribute like this:
>>> === START OF INFORMATION SECTION ===
>>> Device Model: WDC WD2500KS-00MJB0
>>> Serial Number: WD-WCANK1525903
>>> Firmware Version: 02.01C03
>>> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
>>> UPDATED WHEN_FAILED RAW_VALUE
>>> 190 Unknown_Attribute 0x0022 056 037 045 Old_age
>>> Always In_the_past 44
>>> Since it happens on all the drives and it indicates it is an Old_age
>>> type bu the drives are new, I'm inclined to just ignore it. Maybe
>>> just a firmware glitch or something?
>> I'm inclined to think it's a firmware glitch. How about writing to >WD
>> about this, and let us know what they say.
>Well, although the website says most questions are answered in a day, >my
>question has been unanswered for two weeks. My guess is they mean most
>questions for which a canned response works are answered in a day and
>most other questions are ignored. Sigh. Guess I'll alter my conf to
>ignore this attribute.
I have the same line on a WD2000JS (western digital 200go sata2) :
190 Unknown_Attribute 0x0022 052 011 045 Old_age Always
The line of attribute 190 like the one of Temperature_celsius:
194 Temperature_Celsius 0x0022 102 061 000 Old_age Always
I think it's the external temerature of the hard drive, be carefull with
it. My drive paint was damage with raw values greather than 70 for this
I also notice that for each of these line, value + raw_value is constant
(100 for line 190, 150 for line 194).
Hope is help and sorry for my bad english.
Please don't write HTML e-mails!
---- Original message ----
Betreff: Re: [smartmontools-support]Unknown_Attribute Failure
Datum: 31. Mrz 2006 00:57:44
Absender: ">Jason Bishop <jbishop@...>
Empfnger: ">Bruce Allen <ballen@...>
On Tue, 2006-01-31 at 08:53 -0600, Bruce Allen wrote:
> > I have three new Western Digital drives behind a 3ware controller.